This study focused on a comparative analysis of oxygen and hypochlorite ions as cathodic electron acceptors in microbial fuel cell (MFC) reactors treating wastewater containing methylene blue dye. One of the major factors influencing MFC performance is the choice of cathodic electron acceptor, which directly affects electrochemical efficiency and treatment performance. Based on the analysis, the hypochlorite ion-assisted MFC (MFC-H) performed better in its electrochemical properties, achieving a maximum power density of 115.2 mW m−2, which was much higher than that of the oxygen-cathode MFC (29.44 mW m−2). The MFC-H system also exhibited higher coulombic efficiency, a more positive cathode potential, and greater decolorization efficiency (88%) compared to the oxygen-cathode configuration (79%). The enhanced performance of the hypochlorite-based system indicates more effective electron transfer and faster cathodic reaction kinetics, thereby improving energy recovery and dye removal. These results demonstrate that hypochlorite can serve as an effective alternative cathodic electron acceptor in MFCs for treating dye-containing wastewater.
Microbial fuel cells (MFCs) offer a sustainable approach for simultaneous energy recovery and wastewater treatment. However, their performance is often limited by competition from methanogens in mixed-culture systems. In this study, dead biomass of Chaetoceros calcitrans was evaluated as an anodic substrate and compared with Chlorella vulgaris in dual-chamber MFCs. Anaerobic sludge was pretreated with algal biomass to assess methanogen inhibition and its influence on electrochemical performance. The MFC fed with Chaetoceros produced a higher maximum operating voltage (492 ± 2 mV) and average current (4.26 ± 0.2 mA) than the Chlorella-fed MFC (474 ± 3 mV and 3.84 ± 0.3 mA). Polarization analysis showed lower internal resistance in the Chaetoceros system (90 Ω) compared with the Chlorella system (200 Ω), indicating improved anodic activity. Although COD removal was slightly higher in the Chlorella-fed MFC (75 ± 7%) than in the Chaetoceros-fed MFC (71 ± 6%), coulombic efficiency was greater with Chaetoceros (19 vs. 16%), suggesting more effective electron recovery. Cyclic voltammetry, linear sweep voltammetry and Tafel analysis were consistent with greater electrochemical activity at the bioanode of the Chaetoceros-treated system. RT-qPCR analysis showed a substantially greater reduction in methanogen-specific gene abundance with Chaetoceros (68.75 ± 1.96%) than with Chlorella (10.23 ± 2.1%). Overall, Chaetoceros calcitrans appears to be a promising algal substrate for improving MFC performance and reducing methanogen abundance, as indicated by RT-PCR analysis; however, direct methane measurements are required to confirm methanogenesis inhibition. Graphical Abstract
Microbial fuel cells (MFCs) offer a sustainable approach for simultaneous azo dye removal and bioelectricity generation from wastewater. In this study, we evaluated the effect of methyl orange (MO) dye concentration on the performance of a cylindrical earthen-membrane MFC under long-term operation. Five MFC configurations, in duplicate, were operated with acetate-fed anodes for 22 operational cycles with dye concentrations ranging from 20 to 100 mg L−1. Throughout the study, stable decolorization was observed with maximum dye removal efficiencies of 90.0%, 88.1%, 87.8%, 86.9%, and 86.0% at 20, 40, 60, 80, and 100 mg L−1 MO, respectively. The highest power density obtained was 48 mW m−2 for an MO concentration of 60 mg L−1. Reduced power generation at higher dye concentrations (>60 mg L−1) may be due to inhibitory effects on microbial electron transfer. Considering decolorization, power output, and coulombic efficiency together, 60 mg L−1 was identified as the optimal MO concentration, whereas up to 100 mg L−1 could still be decolorized by >85% at the cost of lower power output. The results indicate that low-cost earthen-membrane cylindrical MFCs are a promising technology for sustainable wastewater treatment and can effectively decolorize MO while recovering bioenergy during prolonged operation.
Microbial fuel cells (MFCs) offer a sustainable approach for simultaneous azo dye removal and bioelectricity generation from wastewater. In the present study, the effect of methyl orange (MO) dye concentration on the performance of an earthen membrane cylindrical MFC was evaluated under long-term operation. Five MFC configurations, in duplicate, were operated with acetate-fed anodes for 22 operational cycles with dye concentrations ranging from 20 to 100 mg L⁻¹. Throughout the study, stable decolourisation was observed with maximum dye removal efficiencies of 90.0%, 88.1%, 87.8%, 86.9%, and 86.0% at 20, 40, 60, 80, and 100 mg L⁻¹ MO, respectively. The highest power density obtained was 48 mW m⁻² for an MO concentration of 60 mg L⁻¹. Reduced power generation at higher dye concentrations (>60 mg L⁻¹) may be due to inhibitory effects on microbial electron transfer. Considering decolourisation, power output and coulombic efficiency together, 60 mg L⁻¹ was identified as the optimal MO concentration, whereas up to 100 mg L⁻¹ could still be decolourised by >85% at the cost of lower power output. The results indicate that low-cost earthen membrane cylindrical MFCs are a potential technology for sustainable wastewater treatment and can effectively decolourise MO while recovering bioenergy under prolonged operation.