Anupama Chacko

Mrs. Anupama Chacko


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 July 2026 in Water
Verified
Journal Article
Open access
PDF file
AEAnna Merin Easo
Anna Merin Easo
AUAkhila Unikrishnan
Akhila Unikrishnan
ACAnupama Chacko
Anupama Chacko
RPRajesh PP
Rajesh PP
Noori TabishNoori Tabish
Noori Tabish
This study focused on a comparative analysis of oxygen and hypochlorite ions as cathodic electron acceptors in microbial fuel cell (MFC) reactors treating wastewater containing methylene blue dye. One of the major factors influencing MFC performance is the choice of cathodic electron acceptor, which directly affects electrochemical efficiency and treatment performance. Based on the analysis, the hypochlorite ion-assisted MFC (MFC-H) performed better in its electrochemical properties, achieving a maximum power density of 115.2 mW m−2, which was much higher than that of the oxygen-cathode MFC (29.44 mW m−2). The MFC-H system also exhibited higher coulombic efficiency, a more positive cathode potential, and greater decolorization efficiency (88%) compared to the oxygen-cathode configuration (79%). The enhanced performance of the hypochlorite-based system indicates more effective electron transfer and faster cathodic reaction kinetics, thereby improving energy recovery and dye removal. These results demonstrate that hypochlorite can serve as an effective alternative cathodic electron acceptor in MFCs for treating dye-containing wastewater.

28 October 2026 in Energies
Verified
Journal Article
Open access
PDF file
ACAnupama Chacko
Anupama Chacko
NCNarnepati Krishna Chaitanya
Narnepati Krishna Chaitanya
Vyshnavi ShajiVyshnavi Shaji
Vyshnavi Shaji
PCPritha Chatterjee
Pritha Chatterjee
SPShibin Sobhanam Padmini
Shibin Sobhanam Padmini
RPRajesh PP
Rajesh PP
Microbial fuel cells (MFCs) offer a sustainable approach for simultaneous azo dye removal and bioelectricity generation from wastewater. In this study, we evaluated the effect of methyl orange (MO) dye concentration on the performance of a cylindrical earthen-membrane MFC under long-term operation. Five MFC configurations, in duplicate, were operated with acetate-fed anodes for 22 operational cycles with dye concentrations ranging from 20 to 100 mg L−1. Throughout the study, stable decolorization was observed with maximum dye removal efficiencies of 90.0%, 88.1%, 87.8%, 86.9%, and 86.0% at 20, 40, 60, 80, and 100 mg L−1 MO, respectively. The highest power density obtained was 48 mW m−2 for an MO concentration of 60 mg L−1. Reduced power generation at higher dye concentrations (>60 mg L−1) may be due to inhibitory effects on microbial electron transfer. Considering decolorization, power output, and coulombic efficiency together, 60 mg L−1 was identified as the optimal MO concentration, whereas up to 100 mg L−1 could still be decolorized by >85% at the cost of lower power output. The results indicate that low-cost earthen-membrane cylindrical MFCs are a promising technology for sustainable wastewater treatment and can effectively decolorize MO while recovering bioenergy during prolonged operation.

20 October 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
ACAnupama Chacko
Anupama Chacko
NCNarnepati Krishna Chaitanya
Narnepati Krishna Chaitanya
Vyshnavi ShajiVyshnavi Shaji
Vyshnavi Shaji
PCPritha Chatterjee
Pritha Chatterjee
SPShibin Sobhanam Padmini
Shibin Sobhanam Padmini
RPRajesh PP
Rajesh PP
Microbial fuel cells (MFCs) offer a sustainable approach for simultaneous azo dye removal and bioelectricity generation from wastewater. In the present study, the effect of methyl orange (MO) dye concentration on the performance of an earthen membrane cylindrical MFC was evaluated under long-term operation. Five MFC configurations, in duplicate, were operated with acetate-fed anodes for 22 operational cycles with dye concentrations ranging from 20 to 100 mg L⁻¹. Throughout the study, stable decolourisation was observed with maximum dye removal efficiencies of 90.0%, 88.1%, 87.8%, 86.9%, and 86.0% at 20, 40, 60, 80, and 100 mg L⁻¹ MO, respectively. The highest power density obtained was 48 mW m⁻² for an MO concentration of 60 mg L⁻¹. Reduced power generation at higher dye concentrations (>60 mg L⁻¹) may be due to inhibitory effects on microbial electron transfer. Considering decolourisation, power output and coulombic efficiency together, 60 mg L⁻¹ was identified as the optimal MO concentration, whereas up to 100 mg L⁻¹ could still be decolourised by >85% at the cost of lower power output. The results indicate that low-cost earthen membrane cylindrical MFCs are a potential technology for sustainable wastewater treatment and can effectively decolourise MO while recovering bioenergy under prolonged operation.