Wenjie Ma

Dr. Wenjie Ma

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Wenjie MaWenjie Ma
Wenjie Ma
YGYuanpeng Guan
Yuanpeng Guan
BZBo Zhang
Bo Zhang
LWLihao Wu
Lihao Wu
The LCL-type grid-connected inverter (GCI) is widely adopted between distributed generation (DG) and power grid to realize DC/AC power conversion. However, the underdamped LCL filter will cause a resonance phenomenon near the control stability boundary, which may lead to instability of the GCI system. The traditional passive damping method will cause power loss, while the active damping method may have the need for additional sensors or be sensitive to parameter changes. In this paper, a control scheme based on active disturbance rejection control (ADRC) is proposed for the LCL-type GCI, and the systematic parameters design process is presented through root locus analysis. With the proposed strategy, only the grid-injected current is sensed to achieve the objectives of grid-injected current direct control and robust resonance damping for the LCL-type GCI. In the design process, the influence of digital control delay and grid impedance uncertainty on system stability is explicitly analyzed in detail. Through this, the GCI can work stably over a wide range of the typical inductive-resistive grid impedance. In addition, it is found that the proposed strategy has good adaptability to the filter parameter perturbation. Simulation and experimental results validate the theoretical analysis in this paper.

15 February 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Wenjie MaWenjie Ma
Wenjie Ma
BZBo Zhang
Bo Zhang
The introduction of the switched affine system opens new perspectives for the control design of dc–dc converters. In order to overcome the drawbacks of the continuous-time switching control methods, several sampled-data-based switching control approaches have been proposed in the literature. However, in these works, the solution of control parameters involves a nonlinear optimization problem. In addition, the designed switching laws are nonlinear functions about the system state, which require higher computational resources. In this article, a periodic time-triggered hybrid control is proposed based on a new design framework. All the design conditions are in linear matrix inequality formulations, which can be conveniently solved by common semidefinite programming software. Moreover, the proposed switching law is a linear function about the state, reducing the online computing burden. Finally, a unified view of the classical continuous-time switching scheme and the proposed method is established. Simulation and experiment tests on a buck–boost converter demonstrate the good performance of the proposed control strategy.

1 December 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Wenjie MaWenjie Ma
Wenjie Ma
YGYuanpeng Guan
Yuanpeng Guan
BZBo Zhang
Bo Zhang
To make the distributed generation provide better support for microgrid, the idea of virtual synchronous generator (VSG) is proposed. Typically, the VSG consists of the outer power loop and the inner cascaded voltage and current control loops. Due to the three-loop cascaded structure, a voltage loop with higher bandwidth is significant for ensuring good power control performance. Moreover, most loads in the microgrid are variable and nonlinear. So, the voltage control scheme must possess strong robustness against load disturbance. A linear active disturbance rejection control (LADRC) scheme based on the improved error feedback control law (IEFCL) is proposed for VSG voltage control. Compared with the traditional EFCL, the proposed IEFCL can effectively improve the gain and compensate phase lag in the mid-frequency, thereby increasing the bandwidth of the LADRC based voltage loop. Quantitative analysis demonstrates the proposed scheme can achieve highly decoupled voltage control in dq frame. In comparison with the traditional strategies, the proposed scheme has higher bandwidth and can significantly improve the power control dynamics for VSG in parallel operation. Additionally, it possesses a good capability of harmonic mitigation and strong robustness against load disturbance. Simulations and experiments verify the effectiveness of the proposed scheme.

7 June 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Wenjie MaWenjie Ma
Wenjie Ma
BZBo Zhang
Bo Zhang
DQDongyuan Qiu
Dongyuan Qiu
HSHuadong Sun
Huadong Sun
The introduction of switched system theory opens new perspectives for the control design of dc/dc converters. Regarding the classical two-level converters, two switching control design methodologies have been developed based on the common quadratic Lyapunov function (CQLF) or piecewise quadratic Lyapunov function (PQLF). However, the CQLF-based design method is not applicable for the multilevel dc/dc converter (MC). As for the PQLF-based design method, it encounters the problem that the control design is very complex, involving a nonlinear optimization problem. To further advance the application of the switching system theory in power converters, a design framework based on the polynomial Lyapunov function and the sum-of-squares approach is proposed in this article. The proposed design method generalizes the CQLF-based one. Moreover, compared with the PQLF-based design method, the mathematical design procedure can be significantly simplified. Experimental validations on an MC, i.e., the three-level flying capacitor converter and a two-level Buck-Boost converter illustrate the versatility and the effectiveness of the proposed design framework. Moreover, comparative tests show the good control performance of the designed switching control strategy. The currently presented works are preliminary but could constitute an interesting direction for developing control solutions of power converters.

2 November 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Wenjie MaWenjie Ma
Wenjie Ma
BZBo Zhang
Bo Zhang
DQDongyuan Qiu
Dongyuan Qiu
For the four-level flying-capacitor converter (FFCC), it is required to simultaneously control the output voltage and balance the flying-capacitor voltages. Existing control methods for the FFCC always employ multiple control loops, where for every controlled voltage variable an independent control loop is to be designed. However, such a control structure of multiple loops leads to a complex coupling effect among these loops. Due to the coupling, it is difficult to achieve a coordinated design of a large number of control parameters and demonstrate the control system stability. To simplify the control design and the implementation, this article proposes a single-loop control strategy by using the switched system theory. All the voltages are driven towards their desired values with a single control loop, instead of using several individual controllers. Thus, the issue of devoting efforts to dealing with the couplings among multiple control loops is bypassed. Moreover, the system's large-signal stability is ensured in a straightforward manner, thereby simplifying the stability analysis. In the design process, the system parameter uncertainties are also considered. Comparative experiments demonstrate the good transient performance and the strong robustness of the proposed control strategy.

6 November 2019 in IEEE Access
Verified
Journal Article
Open access
Wenjie MaWenjie Ma
Wenjie Ma
SOSen Ouyang
Sen Ouyang
JZJun Zhang
Jun Zhang
WXWeidong Xu
Weidong Xu
To overcome the drawbacks of the proportional plus integral (PI) control based strategy, i.e., limitation for harmonic suppression and performance deterioration under load variation, a voltage control strategy based on the H∞ repetitive controller with inverter-side current feedback damping is proposed for the inverter in islanded microgrid. The H∞ repetitive controller provides good robustness against parameter perturbation and ensures the output voltage of low total harmonic distortion. Compared with other damping methods, a good resonance suppression and a better attenuation of the high-order harmonics can be achieved under the proposed strategy, which further improves the control performance of the voltage repetitive control system. A state space model including the damping coefficient is built to implement order reduction of the high-order controller, thereby simplifying the digital implementation while nearly without performance degradation. Moreover, the frequency response analysis shows that the order reduction can improve the adaptability of the controller to parameter variation. Finally, experiments and simulations verify the correctness of the analysis.