Yuxuan Luo

Dr. Yuxuan Luo

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 July 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
JPJieming Pan
Jieming Pan
YLYuxuan Luo
Yuxuan Luo
YLYida Li
Yida Li
CTChen-Khong Tham
Chen-Khong Tham
CHChun-Huat Heng
Chun-Huat Heng
ATAaron Voon-Yew Thean
Aaron Voon-Yew Thean
This paper presents a wireless smart glove based on multi-channel capacitive pressure sensors that is able to recognize 10 American Sign Language gestures at the edge. In this system, 16 capacitive sensors are fabricated on a glove to capture the hand gestures. The sensor data is captured by a 16-channel CDMA-like capacitance-to-digital converter for training/inference at the edge device. Unlike the conventional approach where the capacitive information is recovered before further signal processing, our proposed system approach takes advantage of the capability of the machine learning (ML) algorithms and directly processes the code-modulated signals without demodulation. As a result, it reduces the input data throughput fed into the ML algorithms by 20. The on-site ML implementation significantly reduces decision-making latency and lowers the required data throughput for wireless transmission by at least 4×. The highest testing classification accuracy of our system achieved is 99.7%, with a <0.1% difference from the conventional demodulated sensing scheme.

12 June 2019 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
YLYuxuan Luo
Yuxuan Luo
KTKok-Hin Teng
Kok-Hin Teng
YLYongfu Li
Yongfu Li
WMWei Mao
Wei Mao
YLYongfu Li
Yongfu Li
CHChun-Huat Heng
Chun-Huat Heng
This paper presents a wireless vital signs monitoring system-on-chip including three-lead ECG, bio-impedance (Bio-Z) and body temperature. A Bio-Z readout channel with early demodulation is introduced to detect small body impedance change below 300 mΩ under large baseline resistance while consuming power of 9.8 μW. A direct temperature-to-digital converter is also incorporated, which achieves an absolute resolution of 0.023 °C and inaccuracy less than ±0.13 °C over temperature range of 32-42 °C. The quantized vital sign signal is transmitted through a multi-channel reconfigurable QPSK/BFSK transmitter (TX) to accommodate different power-constraint scenarios. Fabricated in 130-nm CMOS technology with a total die area of 6.25 mm 2 , the proposed SoC only consumes 74 μW under 0.9-V supply.

6 September 2022 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
CZCheng Zhuo
Cheng Zhuo
ZYZeyu Yang
Zeyu Yang
KNKai Ni
Kai Ni
MIMohsen Imani
Mohsen Imani
YLYuxuan Luo
Yuxuan Luo
XYXunzhao Yin
Xunzhao Yin
Content addressable memories (CAMs) are a promising category of computing-in-memory (CiM) elements that can perform highly parallel and efficient search operations for routers, pattern matching, and other data-intensive applications. Various magnetic tunnel junction (MTJ)-based CAM designs have been proposed to realize zero standby power and high-performance search. However, due to the relatively small tunnel magneto-resistance (TMR) ratio, MTJ-based CAMs require extra transistors and differential MTJ branches to distinguish between the parallel and anti-parallel resistance states, resulting in significant area and energy overhead. In this article, we propose a device-circuit co-design approach for an ultracompact CAM design by only exploiting a 1T-1MTJ structure in each cell. We propose a 2-step search scheme to enable the parallel in-memory search operation across the proposed CAM array and demonstrate the sufficient sensing margin of the array in a successful search operation. Evaluation results suggest that our proposed 1T-1MTJ-based CAM design improves $179\times /301\times $ area efficiency compared with the state-of-the-art 15T-4MTJ/20T-6MTJ CAM design. Application benchmarking on hyperdimensional computing (HDC) inference shows a $54.6\times /12.8\times $ speedup compared with GPU/20T-6MTJ CAM-based approaches.

24 November 2022 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
YZYunshan Zhang
Yunshan Zhang
CYChanggui Yang
Changgui Yang
JSJunhong Sun
Junhong Sun
ZLZhuhao Li
Zhuhao Li
HGHuan Gao
Huan Gao
BZBo Zhao
Bo Zhao
Wireless neural-recording instruments eliminate the bulky cables in multi-channel signal transmission, while the system size should be reduced to mitigate the impact on freely-moving animals. As the battery usually dominates the system size, the neural-recording chip should be low power to minimize the battery in long-termly monitoring. In general, a neural-recording chip consists of an analog front end (AFE) and an 8bit $-$ 10bit analog-to-digital converter (ADC), while it's challenging to design an ADC with an 8 $-$ 10 effective number of bits (ENOB) and sub- $\mu$ W power consumption due to the kickback noise. In this work, we propose a kickback-reduction technique for a successive-approximation-register (SAR) ADC based on neural-recording chip. Fabricated in 65nm CMOS process, the proposed technique reduce the ADC power to 315nW, resulting in an 8-channel neural-recording chip with 249 $\mu$ W in total. Measured results show that the chip achieves an ADC ENOB of 9.73 bits, as well as an AFE gain of 43.3dB and input-referred noise (IRN) of 9.68 $\mu V_{rms}$ in a bandwidth of 0.9Hz $-$ 7.2kHz. Combined with a BLE chip and a PCB antenna, the chip is implemented into a 2.6g wireless headstage system (w/o battery), and an in-vivo demonstration is conducted on a male Sprague-Dawley rat with Parkinson's disease. The headstage system transfers the in-vivo neural signals to a commodity smartphone through BLE, and the miniature size induces little impact on freely-moving activities.

12 March 2024 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YSYili Shen
Yili Shen
CYChanggui Yang
Changgui Yang
YZYunshan Zhang
Yunshan Zhang
WWWeixiao Wang
Weixiao Wang
YLYuxuan Luo
Yuxuan Luo
BZBo Zhao
Bo Zhao
Wireless fully implanted devices are widely adopted for long-term neural-recording applications, where the cable-induced infection risk can be avoided. Battery-free communication based on wireless power transfer (WPT) can eliminate the battery to reduce the size of a wireless implant, realizing minimally invasive surgery. However, conventional battery-free implants suffer from a short communication range, such as inductive coupling, near-infrared (NIR) transmission, and active body-channel communication (BCC), which cannot apply to deep brain zones. Ultrasonic power transfer and communication benefit from a low channel loss, but the low carrier frequency leads to a low data rate, which is not able to transfer full-span neural signals such as spikes and multichannel signals. In this work, a galvanically-switching passive-BCC technique is proposed for neural implants, to extend the effective range of both power transfer and wireless communication. The brain tissue is utilized to form a galvanic loop for power delivery, while the neural-recording data switch the loop current to conduct passive BCC. The proposed technique is implemented in a neural recording chip fabricated in a 55-nm CMOS process. Through-tissue measurement shows that the chip realizes a battery-free communication range of 5.5 cm, with a bit-error rate (BER) of $4.4\ttimes10^{-6}$ . In the in-vivo demonstration, a 5.9-mm $^3$ flexible prototype with the proposed chip inside is fully implanted into a Sprague–Dawley rat, where the neural signals are read battery-free through the passive-BCC technique.

5 November 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YLYuxuan Luo
Yuxuan Luo
YLYida Li
Yida Li
ATAaron Voon-Yew Thean
Aaron Voon-Yew Thean
CHChun-Huat Heng
Chun-Huat Heng
This article presents a multi-channel capacitance-to-digital converter (CDC) circuits using the continuous-time Walsh coding multiplexing. The proposed circuits modulate the input capacitive sensors with orthogonal codes, enable simultaneous read-in of 16 capacitive sensors, and provide the combined 16 digitized outputs in a single conversion. By correlating 16 successive digitized outputs with the corresponding orthogonal codes in post-processing, the 16 capacitive channels can then be demodulated separately. The proposed continuous-time Walsh coding modulation preserves temporal information with minimum circuitry duplication and bandwidth requirement. This chip is fabricated in 130-nm CMOS technology and occupies an area of 0.14 mm². With a reference clock of 4 MHz, the proposed multi-channel CDC achieves 11.4 ENOB with an average conversion time of 482 μs. It consumes 0.51 μW/channel and achieves an FoM of 87 fJ/conversion step.