Abdelkader Djebli

Prof. Abdelkader Djebli

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2019 in Journal of Biomimetics, Biomaterials and Biomedical Engineering
Verified
Journal Article
Closed access
PDF file
HKHabib Khellafi
Habib Khellafi
MBMohammed Mokhtar Bouziane
Mohammed Mokhtar Bouziane
ADAbdelkader Djebli
Abdelkader Djebli
AMAbdeldjalil Mankour
Abdeldjalil Mankour
MBMustapha Bendouba
Mustapha Bendouba
ECEl Bahri Ould Chikh
El Bahri Ould Chikh
Generally, implants fixations in orthopedic surgery are insured by bone cement; which is generated mainly from polymer polymethylmethacrylate (PMMA). Since, the cement is identified as the weakest part among bone-cement-prosthesis assembly. Hence, the characterization of mechanical behaviour is of a crucial requirement for orthopaedic surgeon’s success. In this study, we investigates the failure behaviour of bone cement, under combined shear and compression loading, for the aim to determine the strengths of bone cement for different mode loading conditions. Therefore, experimental cylindrical specimens has been tested to assess different shear-compression stresses. Based on the mechanical tests, a finite elements model of cylindrical specimens was developed to evaluate stresses distribution in the bone cement under compression, shear and combined shear-compression loading. Results show that, the load which leading to the failure of the cement decreased with increasing of the specimen angle inclination with respect of loading direction.

26 September 2018 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
ABAbdelghani BALTACH
Abdelghani BALTACH
ADAbdelkader Djebli
Abdelkader Djebli
MBMostefa Bendouba
Mostefa Bendouba
EBEl Hadj Besseghier
El Hadj Besseghier
AAAbdelkrim Aid
Abdelkrim Aid
This paper presents a numerical investigation about the influence of mandrel shape on residual stresses induced by the cold expansion procedure. Thus, ball and tapered pin are used for cold expanding the plate. As, the entrance face presents the lowest residual stresses throughout the hole thickness, we propose to solve this problem by varying the mandrel taper degree, instead of applying a double expansion. The obtained results show that the tapered pin is more suitable for the cold expansion. More, low taper increases the residual stresses at the entrance, reaching the values generated at the exit face.

1 February 2016 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
ADAbdelkader Djebli
Abdelkader Djebli
MBMostefa Bendouba
Mostefa Bendouba
AAAid Abdelkarim
Aid Abdelkarim
A method of fatigue damage accumulation based upon application of energy parameters of the fatigue process is proposed in the paper. Using this model is simple, it has no parameter to be determined, it requires only the knowledge of the curve W–N (W: strain energy density N: number of cycles at failure) determined from the experimental Wöhler curve. To examine the performance of nonlinear models proposed in the estimation of fatigue damage and fatigue life of components under random loading, a batch of specimens made of 6082 T6 aluminium alloy has been studied and some of the results are reported in the present paper. The paper describes an algorithm and suggests a fatigue cumulative damage model, especially when random loading is considered. This work contains the results of uni-axial random load fatigue tests with different mean and amplitude values performed on 6082 T6 aluminium alloy specimens. The proposed model has been formulated to take into account the damage evolution at different load levels and it allows the effect of the loading sequence to be included by means of a recurrence formula derived for multilevel loading, considering complex load sequences. It is concluded that a ‘damaged stress interaction damage rule’ proposed here allows a better fatigue damage prediction than the widely used Palmgren–Miner rule, and a formula derived in random fatigue could be used to predict the fatigue damage and fatigue lifetime very easily. The results obtained by the model are compared with the experimental results and those calculated by the most fatigue damage model used in fatigue (Miner’s model). The comparison shows that the proposed model, presents a good estimation of the experimental results. Moreover, the error is minimized in comparison to the Miner’s model.

1 January 2020 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
ATAli Taghezout
Ali Taghezout
BMBendouba Mostefa
Bendouba Mostefa
ADAbdelkader Djebli
Abdelkader Djebli
AAAid Abdelkarim
Aid Abdelkarim
HKHabib Khellafi
Habib Khellafi
In this paper a numerical modeling was carried out to study the problem of plane elasticity in a medium cracked by the method of the extended finite elements (XFEM) in a thin cracked plate made of aluminum using the software Abaqus 6.13.This method improved the capability of the classical finite element method especially the crack propagation problems. Furthermore, the extended finite elements method has been used to simulate tensile and fracture behavior of the study materials. Based on variation in size and shape of crack, the results obtained will be compared with those obtained experimentally, this comparison shows a good agreement.

1 April 2019 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
SASid Ahmed Athmane
Sid Ahmed Athmane
ADAbdelkader Djebli
Abdelkader Djebli
BMBendouba Mostefa
Bendouba Mostefa
AAAid Abdelkrim
Aid Abdelkrim
BBBel Abbes Bachir Bouiadjra
Bel Abbes Bachir Bouiadjra
A fatigue damage accumulation model for composite materials is proposed. There is unanimity on the complex nature of the mechanisms of damage inherent to these types of materials. This led to proposals for nonlinear models, but relatively expensive in experimental requirements and determination of parameters. Thus, the proposed model is simple and does not require parameters apart the ultimate strength and the fatigue curve. A program is developed to allow the follow-up of the damage evolution during the cycles of loading. The proposed model is applied to E-Glass/Epoxy [0°/90°] under two blocks loading. Prediction results are relatively good and fit well with the experimental results compared to similar models.

1 May 2017 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
BABaltach Abdelghani
Baltach Abdelghani
AAAid Abdelkarim
Aid Abdelkarim
ADAbdelkader Djebli
Abdelkader Djebli
BBBelabbes Bachir Bouiedjra
Belabbes Bachir Bouiedjra
BABenhamena Ali
Benhamena Ali
A nonlinear 3-D finite element analysis was conducted to analyze the crack front behavior of a center cracked aluminum plate, asymmetrically repaired with composite patch. According to experimental observations, the crack front was modeled as an inclined shape from the initial state where the crack front is straight and parallel to the thickness direction from the patched side toward the un-patched side. The skew degree is found to strongly influence the stress intensity factor (SIF) distribution along the crack front. In effect, the obtained trends of the SIF’s distribution are different and changes during crack growth stages. The main finding is that regardless the crack front shape (inclination), the average stress intensity factor through the crack front remains constant and consequently, it means to be an effective parameter to estimate the fatigue life and crack growth of the asymmetrically patched structures. The performed models gave good results compared to the literature and the different findings correlate well with the experimental observations and make sense with a realistic crack development.