Zhengcai Fu

Prof. Zhengcai Fu


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2018 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
YHYuwei He
Yuwei He
BWBengang Wei
Bengang Wei
ZFZhengcai Fu
Zhengcai Fu
MDMingqiu Dai
Mingqiu Dai
JLJian Liu
Jian Liu
Low-voltage (LV) metal oxide varistor (MOV) is the main voltage limiting element employed in surge protective devices to protect sensitive equipment against lightning currents. MOV failures may threaten the security of electrical and electronic systems. In order to investigate the MOV failure modes under lightning strokes more realistically, operating duty tests with multiwaveform multipulse currents (indicated as “MODT”) are carried out on LV MOVs under simulated operating circumstances. To understand the mechanisms of MOV failure, microstructural examinations, including the elemental composition and phase constituent, are conducted on the tested samples with different failure modes. Experimental results show that the main failure modes for LV MOVs under MODT include coating crack, puncture, and cracking. The multiwaveform multipulse currents with larger amplitudes, shorter interpulse time, as well as when the subsequent steep currents occur before the intermediate stroke current, will result in more serious degradation on MOVs. The microstructural examinations on punctured MOVs show that the white intergranular layers become thicker, and the intergranular phase coats the zinc oxide (ZnO) grains. In addition, the decrease of ZnO grain size is observed both on the punctured and fractured MOV surfaces. Based on these microstructural characteristics, the mechanisms of different MOV failure modes are discussed.

21 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JCJian Chen
Jian Chen
XBXiaolei Bi
Xiaolei Bi
JLJuan Liu
Juan Liu
ZFZhengcai Fu
Zhengcai Fu
The damage induced by lightning strikes in carbon-fiber-reinforced plastic (CFRP) laminates with fasteners is a complex multiphysics coupling process. To clarify the effects of different lightning current components on the induced damage, components C and D were used in simulated lightning strike tests. Ultrasonic C-scans and stereomicroscopy were used to evaluate the damage in the tested specimens. In addition, the electrothermal coupling theory was adopted to model the different effects of the arc and the current flowing through the laminate (hereinafter referred to as the conduction current) on CFRP laminates with fasteners under different lightning current components. Component C, which has a low current amplitude and a long duration, ablated and gasified the fastener and caused less damage to the CFRP laminate. Under component C, the heat produced by the arc played a leading role in damage generation. Component D, which has a high current amplitude and a short duration, caused serious surface and internal damage in the CFRP laminate and little damage to the fastener. Under component D, the damage was mainly caused by the Joule heat generated by the conduction current.

1 December 2016 in IET Generation, Transmission & Distribution
Verified
Journal Article
Open access
PDF file
YHYuwei He
Yuwei He
ZFZhengcai Fu
Zhengcai Fu
BWBengang Wei
Bengang Wei
JCJian Chen
Jian Chen
AJAnfeng Jiang
Anfeng Jiang
Subsequent negative impulses are steep and common in lightning flashes. Under such currents, the dynamic behaviour of metal‐oxide varistors (MOVs) is expected to be significant and would affect the coordination of cascaded surge protective devices (SPDs). This study experimentally investigates the dynamic behaviour of MOVs under steep currents. Based on the dynamic characteristics, simulations are conducted to investigate the coordination of two‐cascaded limiting‐type SPDs with different cascaded combinations, different separation distances, and different loads under subsequent strokes with 0.25/100 μs current waveform. Meanwhile, the results are compared with that under 8/20 and 10/350 μs currents. Experiments are performed to investigate SPD coordination performance under subsequent strokes. The results show that voltages on MOVs of low‐voltage SPDs increase about 6.8‐18.7% under steep currents, compared with that under 8/20 μs current. Thanks to the significantly changed dynamic characteristics, the cascaded SPDs could more easily realise effective coordination under subsequent strokes, compared with that under 8/20 and 10/350 μs currents. Moreover, effective coordination can be achieved in large ranges of separation distances and loads under subsequent strokes. The SPD combinations with clamping voltage of upstream SPD a little higher than downstream SPD have the best behaviour for lightning protection in low‐voltage systems.

13 March 2020 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
YLYAKUN LIU
YAKUN LIU
AGAnirban Guha
Anirban Guha
JMJoan Montanya
Joan Montanya
Yeqing WangYeqing Wang
Yeqing Wang
ZFZhengcai Fu
Zhengcai Fu
Investigating the effects of single impulse current (SIC) and multiwaveform multipulse currents (MWMPCs) on metal contributes to the body of knowledge on lightning damage characteristics and mechanisms. This information is the basis for lightning protection of metal-made structures such as oil tanks, wires, and aircraft. In this article, three typical impulse currents, the 30-/80-μs waveform current with amplitude of 150 kA, the 2-ms square-waveform current with amplitude of 2 kA, and the 520-ms rectangular-waveform current with amplitude of 404 A, are individually generated to inflict damage to aluminum alloy (Al 3003) for studying the effects of different lightning currents. Results are further compared to the continuously combined application with MWMPC, which is more close to real lightning. The damaged area of alloy suffered from the combined application experiment is 3156.0 mm² and damaged depth is 4.7 mm, increased by 15% and 42% compared with the extreme results of individual application. In the MWMPC experiment, oxygen content increases to 35.6% and microhardness grows to 78.5, 21% and 2% higher than the extreme in SIC experiments. Damage deepening effect and crack intensifying effect are discovered in the combined MWMPC experiment. This article provides data for lightning protection and damage modeling.

1 October 2014
Verified
Conference Paper
Closed access
AJAnfeng Jiang
Anfeng Jiang
ZFZhengcai Fu
Zhengcai Fu
WSWei Sun
Wei Sun
JCJian Chen
Jian Chen
GWGuoli Wang
Guoli Wang
RLRuihai Li
Ruihai Li
The multiple lightning strokes are the main cause of distribution arresters failures. In order to evaluate performance of distribution lines arresters more realistically, the experimental and analytical studies of the effects of multiple lightning impulse currents on metal-oxide arrester blocks are carried out. The multiple impulse current generator developed by Shanghai Jiao Tong University is adopted, the generator could output four impulse current representing one first stroke current, two subsequent stroke current and one continuing current of interval stroke, respectively. The variable interval time between the two impulses could achieve as low as 1 ms. The effects of block dimension, interval time between impulse currents, the sequences of impulse currents and the amplitude of impulse currents are studied. The results show larger amplitude of multiple impulse current, less interval time between impulse currents and smaller geometric parameter of arrester block are the causes of blocks failure. Surface flashover and energy absorption are two failure characteristics under multiple impulse current. The DC 1mA reference voltage is more sensitive than the residual voltage of blocks under multiple impulse current. The multiple impulse currents tests are suitable for performance evaluation of distribution lines arresters under natural lightning stroke.

1 January 2006
Verified
Conference Paper
Closed access
DZDong Zhang
Dong Zhang
ZFZhengcai Fu
Zhengcai Fu
YDY. Du
Y. Du
ZLZhang Liuchun
Zhang Liuchun
Capacitor setting/switching and network reconfiguration are two important means for optimizing the operating condition of the distribution systems. For both of them are complicated combinatorial algorithms, it is hard to effectively combine these two important means to do better optimization. In this paper, a joint optimization algorithm, based on the combination of capacitor switching and network reconfiguration, for loss reduction in distribution system is proposed. In method, an improved adaptive genetic algorithm(IAGA) is developed to optimize capacitor switching and is taken as the main optimization flow. The formulation of network reconfiguration is simplified according to the parameter features after capacitor switching. Capacitors at each location are encoded into binary strings and comprehensive optimization results, after carrying out network reconfiguration for each encoding string, are evaluated as fitness values of encoding strings. For IAGA based main optimization flow and the simplified formulation of network reconfiguration, the proposed method has effectively solved the problems of low computation efficiency and small searching spaces of the conventional joint optimization method. Test results proved the validity and high performance of the proposed method