Yupeng Wang

Mr. Yupeng Wang

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2025
Verified
Conference Paper
Open access
ZYZejiong Yu
Zejiong Yu
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
YZYifan Zhou
Yifan Zhou
YWYupeng Wang
Yupeng Wang
JLJizhan Lin
Jizhan Lin
HQHongbo Qin
Hongbo Qin
During the packaging, manufacturing and use of electronic equipment, thermal warpage in printed circuit board assembly (PCBA) seriously affects product quality and service life. The problem of warpage is more challenging under high temperature conditions. Due to the high cost of special equipment, accurate measurement is still difficult. Based on the principle of direct laser triangulation, a sub-micron non-contact measuring instrument was developed to accurately measure the warpage of PCBA under thermal load. Combined with the Keyence laser contour measurement sensor, the instrument structure framework is designed. Then, the test results are planarized, and the results are calibrated by referring to the results of the shadow mole to achieve high-precision detection. In order to predict the warpage of PCBA, a linear elastic model and a viscoelastic model were established by COMSOL Multiphysics for finite element analysis. The results show that the maximum error of the self-developed sub-micron non-contact measuring instrument is less than 15% compared with the shadow moire. It realizes high-precision measurement, meets the test requirements of microelectronic packaging, reduces the test cost, and lays a foundation for the optimization of packaging process. Compared with the linear elastic model, the simulation warpage results of the viscoelastic model are closer to the experimental results, and the maximum error of the simulation is reduced from 27.73% to 10.39%. The prediction ability of finite element model is optimized, which provides more accurate data support and analysis method for reliability analysis and quality control of microelectronic packaging.

29 July 2026 in Crystals
Verified
Journal Article
Open access
PDF file
YWYupeng Wang
Yupeng Wang
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
HZHuilin Zhang
Huilin Zhang
HQHongbo Qin
Hongbo Qin
JHJiaqiang Huang
Jiaqiang Huang
MHMingzhen Hu
Mingzhen Hu
To investigate the effects of trace phosphorus (P) addition on the solidification behavior, microstructure, and local mechanical response of β-Sn alloys, Sn–P alloys containing 0.02, 0.05, and 0.08 wt.% P were prepared. Phase constitution, solidification characteristics, and nanomechanical properties were characterized by X-ray diffraction, thermogravimetry–differential scanning calorimetry, and nanoindentation, respectively. Electron backscatter diffraction was additionally conducted on representative pure Sn and Sn–P0.08 samples to qualitatively compare the endpoint microstructures. All alloys were primarily composed of β-Sn, while localized P-rich secondary regions in Sn–P0.08 were indexed as Sn4P3. Trace P promoted heterogeneous nucleation and markedly modified solidification, increasing the solidification peak temperature by approximately 20–22 °C and reducing the undercooling from 39.83 °C to 17.50–20.33 °C. Relative to pure Sn, Sn–P0.08 exhibited more grain regions and grain boundaries, together with pronounced dendritic and locally refined features, indicating modified β-Sn nucleation and growth. Young’s modulus and hardness of Sn–P0.08 reached 29.86 GPa and 0.232 GPa, respectively. Inverse nanoindentation analysis revealed increased representative stress, strain-hardening exponent, and strength coefficient. Fracture-energy analysis showed superior crack-growth energy dissipation for Sn–P0.02, whereas Sn–P0.08 exhibited greater resistance to plastic deformation.

6 August 2026 in Coatings
Verified
Journal Article
Open access
PDF file
YWYupeng Wang
Yupeng Wang
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
YHYuheng Han
Yuheng Han
HQHongbo Qin
Hongbo Qin
JHJiaqiang Huang
Jiaqiang Huang
TLTianhan Liu
Tianhan Liu
To improve the corrosion resistance of Sn coatings on Cu substrates in chloride-containing environments, pure Sn and Sn–P coatings containing 0.02, 0.05, and 0.08 wt.% P were prepared by hot-dip coating. Their surface morphology, surface-film chemistry, and corrosion behavior were characterized using electrochemical measurements, atomic force microscopy (AFM), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDS), and X-ray photoelectron spectroscopy (XPS). The results demonstrate that trace phosphorus addition enhances the electrochemical stability of Sn coatings prepared via the hot-dip method. The corrosion current density decreased from 1.55 × 10−6 A·cm−2 for pure Sn to 3.28 × 10−7 A·cm−2 for SnP0.02, corresponding to a reduction of approximately 79%. Meanwhile, the total resistance increased from 10.46 to 19.03 kΩ·cm2, confirming the enhanced barrier effect of the surface film. AFM results showed that the surface roughness Ra decreased from 13.41 nm for pure Sn to 8.72–12.69 nm for the Sn–P coatings. XPS identified Sn–O, P–O, and Sn–P species, suggesting the formation of a Sn–O/P–O-containing protective film. SnP0.02 exhibited the best overall corrosion resistance, whereas excessive P promoted local P-rich regions and non-uniform film formation, limiting further improvement.