Zhuangchao Zhan

Mr. Zhuangchao Zhan

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 May 2022 in Electronics
Verified
Journal Article
Open access
PDF file
XHXingguo Xing Han
Xingguo Xing Han
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
XSXiaohui Song
Xiaohui Song
LCLixiu Cui
Lixiu Cui
The Standard Template Library (STL) file is the most common data format for the description of an additive manufacturing (AM) geometric model, but it has some disadvantages, such as large errors of the geometric model description, the easy loss of topology information, data duplication, large file sizes, and so on. Aiming at these problems, a direct slicing algorithm based on a Standard for the Exchange of Product Model Data (STEP) model was proposed. For the parts composed of basic types of surfaces such as boundary curves, spherical surfaces and cylindrical surfaces, the traditional geometric method was used to calculate the intersection. For the parts with complex surfaces, the three-dimensional models were described based on Non-Uniform Rational B-Spline (NURBS) surfaces. The NURBS surfaces were layered using a discrete tracking algorithm, the tracking starting point was determined, the intersection line between the tangent plane and each NURBS sub-surface was obtained, and the closed layer contour was formed. Finally, the slicing simulations and printing experiments of solid parts were carried out using the direct slicing algorithm based on the STEP model. It was shown that the dimensional accuracy and surface quality of the printed parts from this algorithm had been significantly improved.

7 August 2024
Verified
Conference Paper
Closed access
FHFangxian He
Fangxian He
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
JZJunhao Zhou
Junhao Zhou
WZWeiyi Zhou
Weiyi Zhou
SFShenhuai Feng
Shenhuai Feng
DYDaoguo Yang
Daoguo Yang
The use of silicon bridge interconnect packaging technology is becoming increasingly widespread in High-Performance Computing (HPC) systems. However, Material thermal expansion mismatches in silicon bridge packaging cause chip warping and bridge stress, directly impacting chip performance and reliability. This study optimizes silicon bridge interconnect packaging processes and structures to reduce chip warping and silicon bridge stress.First, the viscoelastic behavior of the underfill curing process in silicon bridge interconnect packaging is measured using Dynamic Mechanical Analysis (DMA). Next, a 3D finite element simulation model is established to emulate the warpage and stress behaviors of silicon bridge interconnect packaging during flip-chip bonding and underfill processes, with an analysis of potential failure modes and causes. Finally, orthogonal experiments with Grey Relational Analysis optimize chip warpage and silicon bridge stress, identifying the best parameters for silicon bridge interconnect packaging. Results indicate that significant warpage deformation occurs in the chips during both flip-chip bonding and the underfill curing shrinkage process. The concentration of stress on silicon bridges may lead to failures such as fractures or cracks in the silicon bridges. Following optimization of the processes and structures, notable improvements are observed in both chip warpage and silicon bridge stress. Our research improves warp control and reduces failure risks in silicon bridges, providing a valuable guide for silicon bridge interconnect technology application.

1 September 2026 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
QWQing’AO Wei
Qing’AO Wei
SLShunlei Liu
Shunlei Liu
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
HQHongbo Qin
Hongbo Qin
Electroplated anode tin hemispheres are critical consumables in electronic packaging, and surface quality together with physicochemical properties directly governs plating uniformity and solder joint reliability. The systematic effect of trace alloy doping on surface quality has not been characterized in detail, and manual inspection remains labor-intensive. An automated surface quality detection system built around You Only Look Once (YOLO) v11 was introduced to close both gaps. With Bi doping mass fraction as the sole variable, hemispheres doped across 0–0.08 wt.% were fabricated and subsequently evaluated on the same YOLO v11 vision platform. An mAP of 86.2% was obtained from the detector. Recognition accuracy for the three main processing defects (dents, scratches, and stains) exceeded 98%. Single-frame inference was completed in 50 ms, a speed that left manual inspection and handcrafted-feature algorithms far behind. The total defect rate was driven from 10% down to 2.5% by raising the Bi doping level, a graded improvement in surface molding quality. Intelligent human–machine collaborative control for high-end equipment and flexible manufacturing is indicated by the tight coupling of YOLO v11 edge-vision detection with trace-element process control.

6 August 2026 in Coatings
Verified
Journal Article
Open access
PDF file
YWYupeng Wang
Yupeng Wang
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
YHYuheng Han
Yuheng Han
HQHongbo Qin
Hongbo Qin
JHJiaqiang Huang
Jiaqiang Huang
TLTianhan Liu
Tianhan Liu
To improve the corrosion resistance of Sn coatings on Cu substrates in chloride-containing environments, pure Sn and Sn–P coatings containing 0.02, 0.05, and 0.08 wt.% P were prepared by hot-dip coating. Their surface morphology, surface-film chemistry, and corrosion behavior were characterized using electrochemical measurements, atomic force microscopy (AFM), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDS), and X-ray photoelectron spectroscopy (XPS). The results demonstrate that trace phosphorus addition enhances the electrochemical stability of Sn coatings prepared via the hot-dip method. The corrosion current density decreased from 1.55 × 10−6 A·cm−2 for pure Sn to 3.28 × 10−7 A·cm−2 for SnP0.02, corresponding to a reduction of approximately 79%. Meanwhile, the total resistance increased from 10.46 to 19.03 kΩ·cm2, confirming the enhanced barrier effect of the surface film. AFM results showed that the surface roughness Ra decreased from 13.41 nm for pure Sn to 8.72–12.69 nm for the Sn–P coatings. XPS identified Sn–O, P–O, and Sn–P species, suggesting the formation of a Sn–O/P–O-containing protective film. SnP0.02 exhibited the best overall corrosion resistance, whereas excessive P promoted local P-rich regions and non-uniform film formation, limiting further improvement.

29 July 2026 in Crystals
Verified
Journal Article
Open access
PDF file
YWYupeng Wang
Yupeng Wang
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
HZHuilin Zhang
Huilin Zhang
HQHongbo Qin
Hongbo Qin
JHJiaqiang Huang
Jiaqiang Huang
MHMingzhen Hu
Mingzhen Hu
To investigate the effects of trace phosphorus (P) addition on the solidification behavior, microstructure, and local mechanical response of β-Sn alloys, Sn–P alloys containing 0.02, 0.05, and 0.08 wt.% P were prepared. Phase constitution, solidification characteristics, and nanomechanical properties were characterized by X-ray diffraction, thermogravimetry–differential scanning calorimetry, and nanoindentation, respectively. Electron backscatter diffraction was additionally conducted on representative pure Sn and Sn–P0.08 samples to qualitatively compare the endpoint microstructures. All alloys were primarily composed of β-Sn, while localized P-rich secondary regions in Sn–P0.08 were indexed as Sn4P3. Trace P promoted heterogeneous nucleation and markedly modified solidification, increasing the solidification peak temperature by approximately 20–22 °C and reducing the undercooling from 39.83 °C to 17.50–20.33 °C. Relative to pure Sn, Sn–P0.08 exhibited more grain regions and grain boundaries, together with pronounced dendritic and locally refined features, indicating modified β-Sn nucleation and growth. Young’s modulus and hardness of Sn–P0.08 reached 29.86 GPa and 0.232 GPa, respectively. Inverse nanoindentation analysis revealed increased representative stress, strain-hardening exponent, and strength coefficient. Fracture-energy analysis showed superior crack-growth energy dissipation for Sn–P0.02, whereas Sn–P0.08 exhibited greater resistance to plastic deformation.

14 December 2025
Verified
Conference Paper
Open access
ZYZejiong Yu
Zejiong Yu
Zhuangchao ZhanZhuangchao Zhan
Zhuangchao Zhan
YZYifan Zhou
Yifan Zhou
YWYupeng Wang
Yupeng Wang
JLJizhan Lin
Jizhan Lin
HQHongbo Qin
Hongbo Qin
During the packaging, manufacturing and use of electronic equipment, thermal warpage in printed circuit board assembly (PCBA) seriously affects product quality and service life. The problem of warpage is more challenging under high temperature conditions. Due to the high cost of special equipment, accurate measurement is still difficult. Based on the principle of direct laser triangulation, a sub-micron non-contact measuring instrument was developed to accurately measure the warpage of PCBA under thermal load. Combined with the Keyence laser contour measurement sensor, the instrument structure framework is designed. Then, the test results are planarized, and the results are calibrated by referring to the results of the shadow mole to achieve high-precision detection. In order to predict the warpage of PCBA, a linear elastic model and a viscoelastic model were established by COMSOL Multiphysics for finite element analysis. The results show that the maximum error of the self-developed sub-micron non-contact measuring instrument is less than 15% compared with the shadow moire. It realizes high-precision measurement, meets the test requirements of microelectronic packaging, reduces the test cost, and lays a foundation for the optimization of packaging process. Compared with the linear elastic model, the simulation warpage results of the viscoelastic model are closer to the experimental results, and the maximum error of the simulation is reduced from 27.73% to 10.39%. The prediction ability of finite element model is optimized, which provides more accurate data support and analysis method for reliability analysis and quality control of microelectronic packaging.