Biocompatibility constitutes the most fundamental requirement with respect to all dental materials to be applied within the oral cavity. In its environment, various toxic compounds may be released by dental materials which pose potential threats to the patient's health. Due to the fact that dentures remain in the oral cavity for a very long time, a detailed examination and verification of prosthetic materials with a view to their toxicity seems to be essential. By using very sensitive measurement techniques such as gas chromatography, one may determine which compounds are released by these materials. The aim of this paper was to determine the influence of various denture cleansers on the release of organic compounds from four soft dental materials used in prosthetics for lining dentures. These materials when placed in commonly used disinfectants (Corega Tabs, sodium hypochlorite, chlorhexidine, hydrogen peroxide), as well as in artificial saliva, produced 13 chemical compounds such as monomers (methyl methacrylate, ethyl methacrylate, dodecyl methacrylate), plasticizers (dibutyl phthalate, diethyl phthalate, tributyl acetylcitrate) and others (e.g. benzophenone). A comparison of chemical compounds released from acrylic-based materials and those released from silica-based materials demonstrated that acrylic-based materials are less resistant to disinfectants.

Background. The oral environment can negatively affect the physical properties of fiber-reinforced composite (FRC) materials, which can lead to the deterioration of mechanical stability and reduce the span of their clinical usefulness. Objectives. The aim of this study was to determine the influence of artificial saliva on the selected mechanical properties of FRC. Material and methods. The core of the polymer material selected for the study was a bundle of ultrahigh-molecular-weight polyethylene (UHMWPE) fibers. Fourteen samples were stored in an incubator at 37 degrees C, in 20 mL of artificial saliva solution, and weighed on days 1 and 28. At the same time, mechanical tests were performed, including the measurements of Young's modulus, tensile stress, maximum tensile force, and tensile deformation. Results. The analysis of basic statistics together with the results of the Shapiro-Wilk test and the distribution of Spearman's rho coefficient showed a strong negative relationship between the pair of variables - tensile deformation and the sorption of synthetic saliva. The results related to Young's modulus of elasticity and tensile stress were not statistically significant. Conclusions. Water penetration into the space between the fibers does not adversely affect the mechanical properties of the material tested. In the static tensile test, high and desired mechanical strength was observed, which may justify the effective use of this type of material in clinical practice and may be a good alternative to prosthetic restorations, whose retention is obtained only through a mechanical connection with the abutment tooth.

The use of elastic materials favours degradation of their surface. The period of their clinical usefulness is then shortened, and their further utilisation in the oral cavity may have the reverse effect. The surface properties of such material as well as the influence of the humidity on their surface are very important as they determine the prosthetic materials behavior in the mouth. The surface of such material should be resistant to water. Inverse gas chromatography is an accurate, sensitive technique for studying surface properties. Thanks to using a unique equipment specially designed for IGC technique, Surface Energy Analyzer, it was possible to characterize the surface at 0 and 80% of humidity. Our results show that increased humidity does not affect surface properties of studied prosthetic materials. Their ability to dispersive and specific interactions change in very limited degree. IGC experiment was also applied for the estimation of Hansen solubility parameters that indicate ability of a material to dispersive, polar, and hydrogen-bonding interactions. Relation between the surface characteristics and practical use of soft lining materials with implications for their clinical usefulness is also discussed.