The search for environmentally friendly alternatives to conventional fossil fuels has been intensified by the global shift toward sustainable energy sources. With over 95% of the fuel market dominated by petroleum-based products, concerns regarding their limited biodegradability and high eco-toxicity have been escalated. In response, there is a growing demand for biobased solutions that can mitigate pollution and reduce greenhouse gas emissions. In this study, the synthesis of biodiesel from waste almond seed oil (WCO) was focused on, utilizing an innovative bifunctional catalyst derived from waste animal bones and almond shells. The efficacy of the catalyst synthesized from these unconventional materials was confirmed through rigorous characterization techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared (FTIR) spectroscopy, and Brunauer, Emmett, and Teller (BET) analysis. The physicochemical properties of WCO and the resulting biodiesel were evaluated according to ASTM D6751 and EN 14214 standards. To optimize the catalytic process, Box Behnken Design (BBD) was employed to explore the effects of key parameters: reaction temperature (40-60°C), reaction time (60-90 minutes), catalyst loading (0.5-1.5 wt%), and methanol-to-oil ratio (6:1-18:1). Remarkably, under optimal conditions, an impressive biodiesel yield of 86.2% was achieved. Specifically, the optimal parameters were a Methanol:Oil Ratio of 6.026, Catalyst Loading of 1.49917 wt%, Reaction Time of 66.8179 minutes, and Temperature of 59.9806°C. The potential of utilizing waste materials for sustainable biodiesel production is underscored by our findings. The bifunctional catalyst developed in this study represents a cost-effective and environmentally friendly alternative to conventional catalysts, contributing to cleaner fuel production methods.
23 April 2025 in European Journal of Sustainable Development Research
This study aimed to evaluate the effectiveness of hybrid electrocoagulation (EC) and electrooxidation (EO) processes in treating effluent water from the industrial process plant in Owerri. The research involved assessing the physicochemical properties of the wastewater against the discharge standards set by the National Environmental Standards and Regulations Enforcement Agency. The treatment process used iron electrodes for both EC and EO, with optimal treatment times determined as 20 minutes for EC and 30 minutes for EO. Current densities ranging from 4.75 to 12.36 mA/cm² were tested. Key findings indicated that through EC, lead was completely removed, and copper and nickel concentrations were significantly reduced. EO further decreased turbidity and total dissolved solids (TDS) levels. The hybrid EC-EO process achieved a reduction in turbidity to acceptable discharge limits and significantly lowered TDS levels. However, a notable increase in chemical oxygen demand was observed during the hybrid treatment (up to 1099.87%), potentially due to operational issues such as electrode deposition and inadequate mixing. The limitations of the study included operational challenges such as equipment malfunction and human error, which affected the consistency of results. Future research should aim at optimizing process parameters, exploring alternative electrode materials, and addressing operational challenges to improve the efficiency and consistency of the EC-EO hybrid treatment method.
1 July 2025 in European Journal of Sustainable Development Research
The presence of organic pollutants, particularly polycyclic aromatic hydrocarbons and dyes, poses significant environmental threats, necessitating urgent remedial measures. This study aims to address the critical issue of naphthalene contamination in water by investigating the efficacy of modified kaolin as a low-cost adsorbent for its removal from aqueous solutions. Raw kaolin underwent calcination at 650 °C followed by acid treatment using 1M hydrochloric acid. The treated kaolin was meticulously characterized using Fourier-transform infrared spectroscopy and scanning electron microscopy. A comprehensive optimization study was conducted using the Box-Behnken design, revealing the highest removal efficiency (RE) of approximately 87.9% under the following conditions: pH 7, initial naphthalene concentration 100 mg/L, and contact time 120 minutes. Equilibrium data fitting into the Langmuir isotherm yielded an impressive coefficient of determination (R²) value of approximately 0.98. Kinetic data were successfully modeled using the pseudo-second-order equation, further validating the efficacy of the adsorption process. Thermodynamic studies confirmed the feasibility of the adsorption process, as evidenced by increasingly negative values of Gibbs’ free energy alongside a positive enthalpy change. Notably, naphthalene adsorption onto treated kaolin clay particles exhibited promising results. Optimization of process parameters using response surface methodology elucidated an optimum condition for maximum RE, which was experimentally validated. In conclusion, this study establishes that kaolin represents a viable and cost-effective adsorbent for naphthalene removal in water treatment applications. Its potential to mitigate environmental pollution underscores its significance in addressing contemporary environmental challenges.