Rational design of cost-effective and efficient bifunctional oxygen electrocatalysts for sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgently desired for rechargeable metal–air batteries and regenerative fuel cells. Here, the Fe3C nanoparticles encapsulated in N and F codoped and simultaneously etched graphene/CNTs architecture catalyst (Fe3C@N-F-GCNTs) was synthesized by a simple yet cost-effective strategy. The as-prepared Fe3C@N-F-GCNTs exhibited excellent ORR and OER performances, with the ORR half-wave potential positive than that of Pt/C by 14 mV, and the OER overpotential lowered to 432 mV at the current density of 10 mA·cm−2. In addition, the ΔE value (oxygen electrode activity parameter) increased to 0.827 V, which is comparable to the performance of the best nonprecious metal catalysts reported to date. When it was applied in a Zn–air battery as a cathode, it achieved a peak power density of 130 mW·cm−2, exhibiting the potential for large-scale applications.
In metallurgical and chemical engineering processes, the gas–liquid–liquid multiphase flow phenomenon is often encountered. The movement of bubbles in the liquid, and the influence of bubbles on the liquid–liquid interface, have been the focus of extensive research. In the present work, an air–water–oil system was used to explore the movement of bubbles and the phenomenon that occurs when bubbles pass through an interface with various oil viscosities at various gas flow rates. The results show that bubble movement is greatly influenced by the viscosity of the oil at low gas flow rates. The type of phase entrainment and the jet height was changed when increasing the gas flow rate. The stability of the water–oil interface was enhanced with increasing viscosity of the oil phase.