Perfluoroalkoxy (PFA) material exhibits perfect corrosion resistance under both acid or alkaline circumstances; thus, steel heat exchangers are being substituted by those made of PFA in high corrosion atmospheres. However, the low thermal conductivity of PFA degrades its heat transfer efficiency. Based on the extremely high heat conductivity of graphene, a novel grapheme-PFA composite was proposed to simultaneously meet the demands of heat transfer and corrosion resistance. Ultrasonic dispersion technology was used to disperse the aggregated graphene in the composite. Graphene–PFA composites with different graphene contents and using different dispersing solvents were prepared with a hot pressing method, and thermal conductivity, abrasion resistance, crystallization and pyrolysis properties were investigated. The thermal conductivity of PFA composites with graphene content of 20 wt % reached 5.017 W (m·k)−1, which is 21.88 times that of pure PFA. The relationship between the abrasion loss and the friction coefficient of the composites with different graphene contents was obtained. A thermogravimetric analyzer was used to investigate the crystallization and pyrolysis behavior of the composites; correspondingly, the temperature range that composites work in was determined. The heat conduction mechanism was analyzed through the thermal conductivity model of composite materials. The composite material is expected to play an important role in the development of high-performance thermal equipment.
In metallurgical and chemical engineering processes, the gas–liquid–liquid multiphase flow phenomenon is often encountered. The movement of bubbles in the liquid, and the influence of bubbles on the liquid–liquid interface, have been the focus of extensive research. In the present work, an air–water–oil system was used to explore the movement of bubbles and the phenomenon that occurs when bubbles pass through an interface with various oil viscosities at various gas flow rates. The results show that bubble movement is greatly influenced by the viscosity of the oil at low gas flow rates. The type of phase entrainment and the jet height was changed when increasing the gas flow rate. The stability of the water–oil interface was enhanced with increasing viscosity of the oil phase.