Wanting Li

Ms. Wanting Li

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
HWHailin Wu
Hailin Wu
XZXinze Zhao
Xinze Zhao
WLWanting Li
Wanting Li
YLYang Li
Yang Li
TPTengda Pan
Tengda Pan
XLXuetao Li
Xuetao Li
With the rapid development of aerospace, industrial automation, and weapons manufacturing, the performance requirements for conductive slip rings have become more stringent, and their operating environments have become increasingly harsh, making the study of the effects of harsh environmental conditions on slip rings particularly important. This paper systematically reviews the effects of harsh environments on the current-carrying friction and wear behavior of slip rings, with a detailed discussion on the mechanisms by which environmental factors such as high temperature, humidity, corrosive gases, and vacuum influence the tribological properties of slip ring materials. Research has shown that these harsh environments significantly change the friction coefficient, wear rate, and electrical contact performance of slip rings, causing degradation of material properties. By reviewing current experimental studies and numerical simulations, this paper analyzes the performance variations and failure mechanisms of slip rings in various environments, summarizing the key technological progress in enhancing slip ring performance under such conditions, particularly the application of material modification and surface coating technologies. Additionally, concerning the lifetime prediction and monitoring of slip ring systems, this paper explores the potential of multiphysics simulation technology and intelligent monitoring methods. Finally, this paper looks forward to future research directions, including optimization design based on multiphysics simulation, the development of high-temperature coatings, the improvement of lifetime prediction models, and the optimization of thermal management strategies, aiming to provide theoretical support and technical guidance for enhancing the reliability and durability of slip rings in extreme environments.

20 December 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
CLChenshi Li
Chenshi Li
XZXinze Zhao
Xinze Zhao
YLYaru Lv
Yaru Lv
YLYang Li
Yang Li
WLWanting Li
Wanting Li
WYWei Yang
Wei Yang
A carbon brush/collector ring set will have phenomena such as firing and ablation during operation, which is due to the existence of various abnormal contact modes of the brush/ring during operation, thus changing the carbon brush/collector ring interface state. To analyze the effects of different contact modes on the performance of the brush/ring, in this paper, we construct the contact modes of the air gap (loss of contact leads to the existence of a small gap between the two surfaces), direct contact (contact with abrasive particulate media), and surface porosity contact (contact when there is a large pit on the surface of the collector ring due to manufacturing quality defects and abnormal abrasion), and analyze the effects of the various states on the core parameters such as current conduction, ring surface damage, and carbon brush abrasion, which provide a basis for the active suppression of the damage.

10 August 2026 in Coatings
Verified
Journal Article
Open access
PDF file
WLWanting Li
Wanting Li
XZXinze Zhao
Xinze Zhao
WYWei Yang
Wei Yang
XXXiang Xu
Xiang Xu
XZxiaolong zhang
xiaolong zhang
To clarify the origin of asymmetric arc ablation in hydroelectric generator slip rings, a Steel 45/carbon current-carrying friction pair was selected to investigate the influence of current polarity on arc behaviour and interfacial damage. Static gap discharge tests (10 A) and dynamic tests (current density of 10 A/cm2, sliding velocity of 0.419 m/s) were performed to characterize polarity-dependent erosion behaviour. The results indicate that, under the steel(+)–carbon(−) condition, the arc exhibits unstable burst-like discharge accompanied by intense spark spattering. The carbon cathode experiences severe material loss due to the combined effects of cathode-spot heating, positive-ion bombardment, and molten metal droplet impact. The steel surface is characterized by nested erosion pits and spherical resolidified spatter particles, while the apparent ablation-affected area shows an overall increase with accumulated arc duration, with a more pronounced expansion observed at longer durations. Pronounced bidirectional material migration and interfacial elemental enrichment are observed under the steel(+)–carbon(−) configuration, resulting in an apparent net mass loss rate approximately 2.5 times higher than that under the steel(-)–carbon(+) configuration. The reversed steel(−)–carbon(+) configuration produces a spatially constrained and stable arc discharge, accompanied by a continuous remelted layer and network-like thermal-stress cracks on the steel surface. Polarity reversal changes the direction of the interfacial electric field and charged-particle migration, thereby regulating cathode electron emission, arc discharge behaviour, energy distribution in the near-electrode region, and bidirectional material migration across the interface. These results provide a theoretical basis for elucidating the polarity-dependent arc ablation mechanism of steel/carbon friction pairs and for optimizing polarity configuration and differentiated protection strategies for hydroelectric generator slip rings.

30 September 2026 in Coatings
Verified
Journal Article
Open access
PDF file
YLYang Li
Yang Li
XZXinze Zhao
Xinze Zhao
WLWanting Li
Wanting Li
YLYunhui Li
Yunhui Li
HWHailin Wu
Hailin Wu
WYWei Yang
Wei Yang
To elucidate the influence of ring-chamber dust on the current-carrying tribological behavior of the carbon brush/collector ring system in hydro-generators, D172 carbon brushes paired with 45 steel collector rings were employed as the research subjects. Current-carrying sliding friction tests were systematically conducted under varying concentrations of carbon powder, iron powder, and carbon–iron mixed powders. The evolution of friction coefficient, wear loss, wear rate, and contact resistance was analyzed in detail, while the worn carbon brush specimens were characterized using three-dimensional profilometry, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The results demonstrate that different wear debris powders, serving as third-body media, exert significant regulatory effects on both interfacial tribological and electrical conduction behaviors. Under the carbon powder condition, a relatively stable carbonaceous third-body layer readily forms at the interface, maintaining low friction coefficient and wear rate—both reaching their minima at 120 mg/min—thus demonstrating effective friction reduction and wear resistance. In contrast, iron powder conditions promote pronounced abrasive action induced by hard particles, which increases the friction coefficient, accelerates carbon brush wear, and deteriorates the interfacial contact state. For carbon–iron mixed powders, the friction and wear levels lie between those observed for pure carbon and pure iron powders; meanwhile, contact resistance decreases steadily with increasing powder supply rate, indicating relatively superior current-carrying stability. The study reveals that carbon powder primarily contributes positively through lubrication and interfacial protection, whereas iron powder exacerbates damage via particle plowing and contact disruption. The synergistic interaction between the two determines the evolution of the interfacial film layer and the resulting changes in electrical contact performance. These findings provide a theoretical basis for wear control and operational maintenance of carbon brush systems in hydro-generators.