In recent decades, laser additive manufacturing has seen rapid development and has been applied to various fields, including the aerospace, automotive, and biomedical industries. However, the residual stresses that form during the manufacturing process can lead to defects in the printed parts, such as distortion and cracking. Therefore, accurately predicting residual stresses is crucial for preventing part failure and ensuring product quality. This critical review covers the fundamental aspects and formation mechanisms of residual stresses. It also extensively discusses the prediction of residual stresses utilizing experimental, computational, and machine learning methods. Finally, the review addresses the challenges and future directions in predicting residual stresses in laser additive manufacturing.

In directed energy deposition (DED), accurately controlling and predicting melt pool characteristics is essential for ensuring desired material qualities and geometric accuracies. This paper introduces a robust surrogate model based on recurrent neural network (RNN) architectures—Long Short-Term Memory (LSTM), Bidirectional LSTM (Bi-LSTM), and Gated Recurrent Unit (GRU). Leveraging a time series dataset from multi-physics simulations and a three-factor, three-level experimental design, the model accurately predicts melt pool peak temperatures, lengths, widths, and depths under varying conditions. RNN algorithms, particularly Bi-LSTM, demonstrate high predictive accuracy, with an R-square of 0.983 for melt pool peak temperatures. For melt pool geometry, the GRU-based model excels, achieving R-square values above 0.88 and reducing computation time by at least 29%, showcasing its accuracy and efficiency. The RNN-based surrogate model built in this research enhances understanding of melt pool dynamics and supports precise DED system setups.

Directed energy deposition (DED) of low-alloy steels involves strongly coupled effects among alloy composition, solidification behavior, and post-deposition heat treatment, making mechanical property prediction difficult when target-domain data are limited. This study develops a transfer-learning and continuous optimization framework for predicting heat treatment-dependent yield strength (YS), ultimate tensile strength (UTS), hardness (HV), and as-solidified phase fractions of martensite, ferrite, and austenite in DED-processed low-alloy steels. A CALPHAD-based dataset was generated for 125 low-alloy steel compositions. A multilayer perceptron (MLP) surrogate was first trained as a baseline model, then fine-tuned through transfer learning and progressively updated as staged continuous optimization; the composition pool increased from 72 to 125 compositions using Random, Greedy, and Bayesian upper-confidence-bound acquisition strategies. The heat treatment prediction accuracy improved from an average R² of 0.757 for the baseline model to 0.929 after transfer learning and to approximately 0.997 after continuous optimization, with a nearly 78% reduction in RMSE relative to transfer learning. For the solidification outputs, the average R² increased from 0.770 after transfer learning to approximately 0.859 after optimization. Bayesian-UCB provided the most stable and data-efficient improvement by balancing predicted performance with model uncertainty. The optimized prediction system showed low case-study errors for both solidification and heat treatment properties, demonstrating its potential as a rapid screening tool for alloy composition and tempering-condition selection in DED low-alloy steel development.