Centrifugal pumps are essential to modern marine engineering systems for fluid transport. This study is to analyze the typical failure causes of sediment erosion and energy dissipation in a multi-stage centrifugal pump with different blade installation angles α using numerical simulation approach and on-site testing. Three different schemes with α = 0°, 10.85°, and 21.7° were designed. The installation angle of the blade influenced sediment erosion and energy dissipation through three key aspects: turbulent flow, particle motion, and wall roughness. Turbulent and friction dissipation, which are related to the blade angle and sediment erosion, are the leading causes of the pump failure. The symmetrical blade installation, turbulence intensity, particle impact velocity, and wall friction inside the unit were the highest, resulting in the most severe turbulence loss, wall loss, and sediment erosion under this scheme, with the maximum friction loss being 320 W·m−3·K−1. Complex turbulence intensifies the intensity of particle motion, with the maximum sediment erosion rate E = 0.000052 kg·m−2·s−1. Compared to Plan 1 and Plan 3, the performance can be improved by more than 20% and 23%, respectively. There was a positive correlation between the friction loss and erosion rate. The research presented in this study provides a novel perspective on the operation of a pump to prevent sediment erosion failure.
Special orthogonal lateral-intake pumping stations on coastal plains face severe lateral deflection and recirculation in the approach channel and forebay. Their underlying evolutionary mechanisms remain unclear, and conventional rectification methods cause substantial hydraulic losses. Using numerical simulations and hydraulic model experiments, this study investigates these unfavorable flow patterns and proposes an original Combined Arc-Frame Flow Straightening Structure (CAFS). This newly proposed CAFS differs from existing structures, achieving effective flow pattern improvement with reduced hydraulic loss. Results reveal three typical flow regimes—S-shaped mainstream, branching flow, and recirculation—and the flow field is partitioned into four hydrodynamic zones: the Mainstream Incident Zone, Mainstream Impact Zone, Mainstream Reflection Zone, and Low-Velocity Recirculation Zone. Axial velocity uniformity and flow angle are strongly influenced by lateral velocity, while turbulent kinetic energy exhibits intrinsic correlations with vertical vorticity. Lateral velocity, recirculation intensity, and hydraulic losses all increase positively with the Froude number. The CAFS effectively suppresses the low-velocity recirculation zone. Quantitative data show an improvement of 46.40 percentage points in uniformity of axial velocity distribution, a reduction of 0.157 rad (9°) in velocity-weighted average angle, 60.98% less turbulent dissipation, and 38.85% less total hydraulic loss. This study clarifies lateral-intake defect mechanisms and provides a valuable engineering reference.