Wind velocity (strength and direction) is an important parameter for unmanned aerial vehicle (UAV)-based environmental monitoring tasks. A novel wind velocity estimation method is proposed for rotorcrafts. Based on an extended state observer, this method derives the wind disturbance from rotors’ speeds and rotorcraft’s acceleration and position. Then the wind disturbance is scaled to calculate the airspeed vector, which is substituted into a wind triangle to obtain the wind velocity. Easy-to-implement methods for calculating the rotorcraft’s thrust and drag coefficient are also proposed, which are important parameters to obtain the wind drag and the airspeed, respectively. Simulations and experiments using a quadrotor in both hovering and flight conditions have validated the proposed method.
This article presents a new type of active controlled multiple-fan wind tunnel. The wind tunnel consists of swivel plates and arrays of direct current fans, and the rotation speed of each fan and the shaft angle of each swivel plate can be controlled independently for simulating different kinds of outdoor wind fields. To measure the similarity between the simulated wind field and the outdoor wind field, wind speed and direction time series of two kinds of wind fields are recorded by nine two-dimensional ultrasonic anemometers, and then statistical properties of the wind signals in different time scales are analyzed based on the empirical mode decomposition. In addition, the complexity of wind speed and direction time series is also investigated using multiscale entropy and multivariate multiscale entropy. Results suggest that the simulated wind field in the multiple-fan wind tunnel has a high degree of similarity with the outdoor wind field.
On the basis of the actively controlled multiple-fan wind tunnel we designed, this paper proposes a latticed mode–based control strategy for the fan array. The so-called latticed mode is the overall topology of the working fans. In order to investigate the simulation ability of the latticed mode, several latticed modes are designed to analyze the temporal and spatial properties of generated wind fields. Airflow data under different latticed modes are measured using nine two-dimensional anemometers, and then, statistical indicators of wind speed and wind direction, as well as the spatial uniformity and complexity of generated wind fields, are calculated to analyze the characteristics of wind records. The results indicate that the distribution of active fans in the latticed mode has significant influence on the statistical properties and spatial evolutions of wind speed and direction. Besides, the latticed modes can regulate the spatial uniformity and complexity of the wind fields. The latticed modes with a high clustering degree of active fans can generate wind fields with low spatial uniformity and high complexity. In addition to the fan voltage and the rotation angle of swivel plates, the proposed latticed mode provides more possibilities for wind field simulation.
Maintaining contact between the robot and plume is significant in chemical plume tracing (CPT). In the time immediately following the loss of chemical detection during the process of CPT, Track-Out activities bias the robot heading relative to the upwind direction, expecting to rapidly re-contact the plume. To determine the bias angle used in the Track-Out activity, we propose an online instance-based reinforcement learning method, namely virtual trail following (VTF). In VTF, action-value is generalized from recently stored instances of successful Track-Out activities. We also propose a collaborative VTF (cVTF) method, in which multiple robots store their own instances, and learn from the stored instances, in the same database. The proposed VTF and cVTF methods are compared with biased upwind surge (BUS) method, in which all Track-Out activities utilize an offline optimized universal bias angle, in an indoor environment with three different airflow fields. With respect to our experimental conditions, VTF and cVTF show stronger adaptability to different airflow environments than BUS, and furthermore, cVTF yields higher success rates and time-efficiencies than VTF.
Indoor smell affects human health and work efficiency. In order to reduce the impact of indoor smell on human health and work efficiency, a novel indoor smell regulation method was proposed. First, an indoor smell regulation system, including wireless sensor nodes (WSNs), a smell presenting device (SPD), and a wireless control node, was designed. Second, the number and location of WSNs were optimized by combining the computational fluid dynamics with the ant colony optimization algorithm. Third, the location of the SPD was determined according to the diffusion speed, uniformity of distribution, total number of indoor smell particles, and average smell concentration of the breathing section. Finally, experiments were conducted and the results show that the smell regulation system can quickly and effectively detect and remove the unpleasant smell and then release the pleasant smell. Generally, the smell regulation system is capable of performing an indoor smell adjustment in less than 5 min.