In this article, thermal characteristics and tribological properties of a disk-type magnetorheological fluid–based brake are investigated under various brake operating conditions such as different working gaps. In order to achieve this goal, a theoretical analysis of the heating and heat dissipation of the magnetorheological brake is first performed and then the transient temperature behaviors of the magnetorheological brake are investigated through simulation works associated with the finite element method. Subsequently, an experimental apparatus is established to measure temperature distributions of the magnetorheological brake as a function of the operating time. Thereafter, several heating and wear tests are conducted on the magnetorheological brake, and worn surfaces of the friction plates are observed using a scanning electron microscope to understand tribological characteristics of the magnetorheological brake. It is shown that the smaller working gap causes the higher temperature compared with the larger gap under the same magnitude of the input current applied to the magnetorheological fluid domain. This thermal behavior consequently results in the reduction of the braking torque. It is also demonstrated from the wear test that the small working gap significantly affects both wear and tribological characteristics showing the large ridges and deep grooves on the worn surfaces of the friction plate.
30 November 2016 in Journal of Intelligent Material Systems and Structures
The aim of this work is to investigate the effect of the small magnetorheological fluid gap on the braking performance of the magnetorheological brake. In this article, theoretical analyses of the output torque are given first, and then the operating principle and design details of the magnetorheological brake whose magnetorheological fluid gap can be altered are presented and discussed. Next, the magnetic circuit of the proposed magnetorheological brake is conducted and further followed by a magnetostatic simulation of the magnetorheological brakes with different sizes of fluid gap. A prototype of the magnetorheological brake is fabricated and a series of tests are carried out to evaluate the braking performance and torque stability, as well as the verification of the simulation results. Experimental results show that the braking torque increases with the increase in the current, and the difference for the impact of the fluid gap on braking performance is huge under different currents. The rules, which the experimental results show, have an important significance on both the improvement of structure design for magnetorheological brake and the investigation of the wear property under different fluid gaps.
23 September 2016 in Smart Materials and Structures
In this paper, the effect of the surface textures of braking disc on the braking performance is experimentally investigated under the conditions of different working gaps and applied currents. For this purpose, a new configuration of magnetorheological fluid brake (MRB) with adjustable working gap is developed to improve the manufacturing accuracy and cost, and to reduce the problem of replacing the braking disc. In addition, the braking discs with three types of surface texture are designed and machined. Based on the test bed developed for the proposed MRB, a series of experiments are carried out on the manufactured prototype and the results are presented to obtain the relationship among the surface texture of the braking disc, applied current, working gap and the braking performance. The results show that the braking torque is significantly influenced by the working gap and surface texture of the braking disc, and the maximum braking torque is obtained on the conditions of 0.25 mm working gap and the braking disc with square surface texture.
In this study, a novel magnetorheological (MR) polishing device under a compound magnetic field is designed to achieve microlevel polishing of the titanium tubes. The polishing process is realized by combining the rotation motion of the tube and the reciprocating linear motion of the polishing head. Two types of excitation equipment for generating an appropriate compound magnetic field are outlined. A series of experiments are conducted to systematically investigate the effect of compound magnetic field strength, rotation speed, and type and concentration of abrasive particles on the polishing performance delivered by the designed device. The experiments were carried out through controlling variables. Before and after the experiment, the surface roughness in the polished area of the workpiece is measured, and the influence of the independent variable on the polishing effect is judged by a changing rule of surface roughness so as to obtain a better parameter about compound magnetic field strength, concentration of abrasive particles, etc. It is shown from experimental results that diamond abrasive particles are appropriate for fine finishing the internal surface of the titanium-alloy tube. It is also identified that the polishing performance is excellent at high magnetic field strength, fast rotation speed, and high abrasive-particle concentration.
1 August 2018 in International Journal of Applied Electromagnetics and Mechanics
In investigating magnetorheological (MR) brakes, it is well known that the braking torque is the important factor in the structure’s design and the temperature of MR fluid in the brake is required to be within the operating range. In addition, the stress condition of the component changes obviously in the combined effects of force and thermal load which may result in structural damage. This study aims to propose a multi-cylindrical MR brake with a high-torque and investigate it more comprehensively in multi-field simulation. To achieve this goal, the mathematical model of the braking torque and the computing platforms of Maxwell and Ansys workbench are adopted to explore the influence of the exciting current and the number of braking cylinders on the braking performance, as well as the temperature and structural stress distribution of the braking cylinder during braking. The magnetic analysis shows that the proposed magnetic circuit is reasonable. The relationship between braking torque and exciting excitation current is nonlinear. The thermal simulation analysis shows that the temperature of MR brake remains within operating range of MR fluid after braking. The structural stress analysis shows that the contact position of braking cylinder and magnetism-insulator is the easiest place to break.
This paper presents a new constitutive model of high particles concentrated magnetorheological fluids (MRFs) that is based on the hexagonal close-packed structure, which can reflect the micro-structures of the particles under the magnetic field. Firstly, the particle dynamic simulations for the forces sustained by carbonyl iron powder (CIP) particles of MRFs are performed in order to investigate the particles chain-forming process at different time nodes. Subsequently, according to the force analyses, a hexagonal close-packed structure, which differs from the existing single-chain structure and body-cantered cubic structure, is adopted to formulate a constitutive model of MRFs with high concentration of the magnetic-responsive particles. Several experiments are performed while considering crucial factors that influence on the chain-forming mechanism and, hence, change the field-dependent shear yield stress in order to validate the proposed model. These factors include the magnetic induction intensity, volume fraction and radius of CIP particles, and surfactant coating thickness. It is shown that the proposed modeling approach can predict the field-dependent shear yield stress much better than the single-chain model. In addition, it is identified that the shear yield stress is increased as the particle volume fraction increases and surfactant coating thickness decreases. It is believed that the proposed constitutive model can be effectively used to estimate the field-dependent shear yield stress of MRFs with a high concentration of iron particles.