Na Wang

Prof. Na Wang

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2021 in Tribology International
Verified
Journal Article
Closed access
NWNa Wang
Na Wang
SPShuo Pang
Shuo Pang
CYCuili Ye
Cuili Ye
TFTingting Fan
Tingting Fan
SCSeung-Bok Choi
Seung-Bok Choi

3 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
JZJintao Zhang
Jintao Zhang
WSWanli Song
Wanli Song
ZPZhen Peng
Zhen Peng
JGJinwei Gao
Jinwei Gao
NWNa Wang
Na Wang
GKGi Woo Kim
Gi Woo Kim
This paper presents a new constitutive model of high particles concentrated magnetorheological fluids (MRFs) that is based on the hexagonal close-packed structure, which can reflect the micro-structures of the particles under the magnetic field. Firstly, the particle dynamic simulations for the forces sustained by carbonyl iron powder (CIP) particles of MRFs are performed in order to investigate the particles chain-forming process at different time nodes. Subsequently, according to the force analyses, a hexagonal close-packed structure, which differs from the existing single-chain structure and body-cantered cubic structure, is adopted to formulate a constitutive model of MRFs with high concentration of the magnetic-responsive particles. Several experiments are performed while considering crucial factors that influence on the chain-forming mechanism and, hence, change the field-dependent shear yield stress in order to validate the proposed model. These factors include the magnetic induction intensity, volume fraction and radius of CIP particles, and surfactant coating thickness. It is shown that the proposed modeling approach can predict the field-dependent shear yield stress much better than the single-chain model. In addition, it is identified that the shear yield stress is increased as the particle volume fraction increases and surfactant coating thickness decreases. It is believed that the proposed constitutive model can be effectively used to estimate the field-dependent shear yield stress of MRFs with a high concentration of iron particles.

21 September 2018 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
NWNa Wang
Na Wang
SWSiyuan Wang
Siyuan Wang
ZPZhen Peng
Zhen Peng
WSWanli Song
Wanli Song
Xinyu XueXinyu Xue
Xinyu Xue
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
The aim of this work is to develop a magneto-rheological brake control system based on the hardware-in-the-loop simulation to analyze braking performances such as time response characteristics of the desired torque with the input currents. As a first step, a mathematical model of the braking torque is formulated and the optimized structure parameters of magneto-rheological brake are determined. Subsequently, the hardware-in-the-loop simulation system associated with the braking bench is established in which the software controlling the braking performances is implemented by a proportional–integral–derivative controller. Several tests to evaluate control performances of magneto-rheological brake are undertaken focusing on the decrement and increment by the input current. In addition, a quarter vehicle model equipped with the antilock brake system is tested through the hardware-in-the-loop simulation. It is shown that the antilock brake system integrated with magneto-rheological brake quickly tracks the desired slip rate resulting in stable performances.

8 March 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
WSWanli Song
Wanli Song
ZYZhen Yang
Zhen Yang
DMDezhi Meng
Dezhi Meng
NWNa Wang
Na Wang
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
Recently, high internal surfaces for titanium alloy pipes have been required due to the increment of various applications such as aerospace components. In this work, vertical magnetorheological polishing (VMRP) is carried out to achieve high polishing performance on the internal surface of the titanium alloy pipe. A series of comparative experiments were conducted to investigate the polishing mechanism of magnetorheological polishing (MRP) fluid and enhance the polishing performance. It is shown from the experimental results that the VMRP method under the opposite polarity arrangement improves the surface roughness from 47.85% to 83.34% by reducing unwanted vibration and noise during operation. This provides nanoscale surface polishing quality, while such a precision cannot be achieved from the previous horizontal MR polishing apparatus method. It is found that under a 2700 cycle polishing time, a polishing process combining a rough and fine polishing approach with a combination of different particle diameters results in an axial surface roughness of 0.05 μm and circumferential surface roughness of 0.038 μm, respectively. It is also identified that the axial surface roughness of 0.04 μm–0.041 μm is achieved through the combination of high- and low-speed polishing process after 1602 cycles.

24 October 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
NWNa Wang
Na Wang
YCYongbing Cao
Yongbing Cao
ZSZhencong Sun
Zhencong Sun
STShixin Tang
Shixin Tang
Seung-Bok ChoiSeung-Bok Choi
Seung-Bok Choi
The staggered labyrinth seal is widely used in aerospace, transportation, mining, and other fields due to its advantages of adapting to high speed, reliable sealing performance, and low or even frictionless friction between dynamic and static rotors. The traditional calculation method of labyrinth seal leakage mostly focuses on the fact that the internal medium is an ideal gas and only considers a single effect, which cannot accurately describe the leakage of liquid medium lubricating oil in the labyrinth seal. Therefore, this study focuses on the leakage characteristics of labyrinth seals, and it proposes a leakage calculation method based on liquid medium in view of the shortcomings of existing calculation methods under liquid medium conditions. By considering the thermodynamic and frictional effects of the staggered labyrinth sealing, the resistance loss and thermodynamic effect of the lubricating oil in the sealing cavity were analyzed. The flow field analysis was used to reveal the leakage law of lubricating oil under different conditions, and the factors such as total inlet pressure, spindle speed, and sealing clearance were considered. Finally, the leakage characteristics of the staggered labyrinth seal and the accuracy of the calculation method of the leakage of the staggered labyrinth seal under multiple effects were revealed through experimental verification. This study provides useful guidance for the performance optimization of labyrinth seals in practical applications.

10 March 2021 in Coatings
Verified
Journal Article
Open access
PDF file
ZLZhiguo Lu
Zhiguo Lu
CDChuanyv Du
Chuanyv Du
QCQingcai Chen
Qingcai Chen
TNTianying Niu
Tianying Niu
NWNa Wang
Na Wang
WSWanli Song
Wanli Song
The friction and wear characteristics of spike-tooth material (65Mn steel) of Spike-Tooth Harrow in a two-stage peanut harvester were studied in this paper. The friction and wear tests of pin and disc on 65 manganese steel were carried out on the tribometer, then the wear loss and the friction coefficient were studied. The wear loss of the pin was acquired by calculating the mass of the pin before and after the experiment using an electronic balance. According to the actual working environment of peanut spring-finger, four variable parameters are set up: load, speed, soil moisture and soil type. The friction and wear characteristics of pins were studied under different loads, speeds and different soil environments. After wearing, the worn surface of the material was observed by scanning microscope and the wear mechanism was studied. The experimental results show that the wear of the pin increases with the increase of load and decreases with the increase of rotational speed in the same rotation number. Especially in the case of the sandy soil with 20% in moisture, a maximum wear loss of the pin is achieved.