The integrated modular avionics (IMA) system is widely used in all classes of aircraft as a result of its high functional integration and resource utilization in developing advanced avionics systems. However, a series of challenges related to safety assessment exist in the background of the logical architecture for multi-message interactions of the IMA system. Traditional safety assessment methods are mainly based on engineering experience, and are difficult to reuse, incomplete, and even error-prone. Here we propose a method to assess the availability of the IMA system based on the thinking of model-based safety analysis. To aid the proposed method, we implement a tool to generate a AltaRica 3.0 file used to assess the IMA system model. The simulation results show that the proposed method makes the availability assessment fast, efficient, and effective. Moreover, we apply this method to the modification analysis of the IMA system under the condition of satisfying the safety requirement. Our study can enhance the safety assessment of safety-critical systems effectively, assist the design of IMA systems, and reduce the amount of errors during the programming process of the safety model.
Integrated Modular Avionics (IMA) systems bring a series of challenges related to hazard analysis in components interaction. When software applications are integrated onto the IMA platform, it is very difficult to predict what interaction hazards could occur. The System-Theoretic Process Analysis (STPA) based hazard analysis method is extended in this paper to account for behavior that emerges when software applications are integrated and make functional interaction. STPA has its foundation in a new accident causality model called STAMP (System-Theoretic Accident Model and Process). In STAMP, the dysfunctional interactions and requirements flaws during operation are primary types of inadequate control. This method will be capable of modeling the new causal factors that contribute to component interaction hazards. The paper illustrates the new method with a case that includes real-world avionics display functions, this application of the proposed method will be a verification of the method validity.
Avionics Full Duplex switched Ethernet (AFDX) is a real-time Aircraft Data Network (ADN). Sporadic messages with known deadlines to respect but without any urgency are endowed with the same priority and transmitted in chronological order in AFDX [1]. As a result, the overall delay performance of this category of messages is poor, especially for the comparatively small messages. To cope with this problem, we propose to use Static Priority Queueing (SPQ) to transmit this category of messages by endowing the comparatively small messages with higher priority. Then we estimate the latency bounds of this category of messages based on Network Calculus. Simulation results show that the overall delay performance could be improved by 18.24% and particular delay performance of the comparatively small messages could be improved significantly.
As a high availability product, Electronic Flight Instrument System (EFIS) has very complicated redundancy structures to fulfill high safety integrity requirement. This paper presents a comprehensive study on the availability analysis for EFIS by using Dynamic Fault Tree (DFT) approach based on Markov chain with modularization method. The static fault sub-tree is solved by Binary Decision Diagram (BDD) and the dynamic fault sub-tree is solved by Markov chain. A novel Markov chain expression is utilized to avoid state explosion of dynamic fault sub-tree. Besides, Minimal Cut Sequence Set (MCSS) are generated. At last, Monte Carlo simulation is carried out to verify the theoretical results.
The traditional ARP 4761 based safety assessment in development process of civil aircraft systems focuses on safety evaluation of system architecture, which provides few guidance in safety design against system operation hazards. It is difficult for an inexperienced engineer to give valuable suggestions for architecture improvement, and more difficult to translate the safety assessment results into specific safety design requirements. The model-based safety-guided design method based on STPA is incorporated into civil aircraft system development process in this paper, in that case, the safety thinking is included in the early system design in order to capture safety design requirements and reduce the cost introduced by later assessment iterations. The paper illustrates the new method with a case that includes typical real-world civil aircraft system “command and monitor” architecture, this application of the proposed method will be a verification of the method validity.