Jonathan Bradley

Dr. Jonathan Bradley

McMaster University
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 December 2016 in Optics Letters
Verified
Journal Article
Open access
PDF file
ZSZhan Su
Zhan Su
NLNanxi Li
Nanxi Li
EME. Salih Magden
E. Salih Magden
MBMatthew Byrd
Matthew Byrd
PPP Purnawirman
P Purnawirman
MWMichael R. Watts
Michael R. Watts
We demonstrate an ultra-compact and low-threshold thulium microcavity laser that is monolithically integrated on a silicon chip. The integrated microlaser consists of an active thulium-doped aluminum oxide microcavity beside a passive silicon nitride bus waveguide, which enables on-chip pump-input and laser-output coupling. We observe lasing in the wavelength range of 1.8–1.9 μm under 1.6 μm resonant pumping and at varying waveguide-microcavity gap sizes. The microlaser exhibits a threshold as low as 773 μW (226 μW) and a slope efficiency as high as 24% (48%) with respect to the pump power coupled into the silicon nitride bus waveguide (microcavity). Its small footprint, minimal energy consumption, high efficiency, and silicon compatibility demonstrate that on-chip thulium lasers are promising light sources for silicon microphotonic systems.

18 April 2019 in Optics Express
Verified
Journal Article
Open access
PDF file
HFHenry C. Frankis
Henry C. Frankis
KKKhadijeh Miarabbas Kiani
Khadijeh Miarabbas Kiani
DBDawson B. Bonneville
Dawson B. Bonneville
CZChenglin Zhang
Chenglin Zhang
SNSamuel Norris
Samuel Norris
Jonathan BradleyJonathan Bradley
Jonathan Bradley
We report on high-quality tellurium oxide waveguides integrated on a low-loss silicon nitride wafer-scale platform. The waveguides consist of silicon nitride strip features, which are fabricated using a standard foundry process and a tellurium oxide coating layer that is deposited in a single post-processing step. We show that by adjusting the Si3N4 strip height and width and TeO2 layer thickness, a small mode area, small bend radius and high optical intensity overlap with the TeO2 can be obtained. We investigate transmission at 635, 980, 1310, 1550 and 2000 nm wavelengths in paperclip waveguide structures and obtain low propagation losses down to 0.6 dB/cm at 2000 nm. These results illustrate the potential for compact linear, nonlinear and active tellurite glass devices in silicon nitride photonic integrated circuits operating from the visible to mid-infrared.

16 April 2018 in Optics Express
Verified
Journal Article
Closed access
PDF file
ZSZhan Su
Zhan Su
NLNanxi Li
Nanxi Li
HFHenry C. Frankis
Henry C. Frankis
EME. Salih Magden
E. Salih Magden
TAThomas N. Adam
Thomas N. Adam
MWMichael R. Watts
Michael R. Watts
We report on the design and performance of high-Q integrated optical micro-trench cavities on silicon. The microcavities are co-integrated with silicon nitride bus waveguides and fabricated using wafer-scale silicon-photonics-compatible processing steps. The amorphous aluminum oxide resonator material is deposited via sputtering in a single straightforward post-processing step. We examine the theoretical and experimental optical properties of the aluminum oxide micro-trench cavities for different bend radii, film thicknesses and near-infrared wavelengths and demonstrate experimental Q factors of > 106. We propose that this high-Q micro-trench cavity design can be applied to incorporate a wide variety of novel microcavity materials, including rare-earth-doped films for microlasers, into wafer-scale silicon photonics platforms.

4 March 2009 in Optics Express
Verified
Journal Article
Open access
PDF file
AKAndreas Kahn
Andreas Kahn
SHSebastian Heinrich
Sebastian Heinrich
HKHenning Kühn
Henning Kühn
KPKlaus Petermann
Klaus Petermann
Jonathan BradleyJonathan Bradley
Jonathan Bradley
GHGünter Huber
Günter Huber
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

27 February 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DBDawson Bonneville
Dawson Bonneville
JMJeremy W. Miller
Jeremy W. Miller
CSCaitlin Smyth
Caitlin Smyth
PMPeter Mascher
Peter Mascher
Jonathan BradleyJonathan Bradley
Jonathan Bradley
We report on low-temperature and low-pressure deposition conditions of 140 °C and 1.5 mTorr, respectively, to achieve high-optical quality silicon nitride thin films. We deposit the silicon nitride films using an electron cyclotron resonance plasma-enhanced chemical vapour deposition (ECR-PECVD) chamber with Ar-diluted SiH4, and N2 gas. Variable-angle spectroscopic ellipsometry was used to determine the thickness and refractive index of the silicon nitride films, which ranged from 300 to 650 nm and 1.8 to 2.1 at 638 nm, respectively. We used Rutherford backscattering spectrometry to determine the chemical composition of the films, including oxygen contamination, and elastic recoil detection to characterize the removal of hydrogen after annealing. The as-deposited films are found to have variable relative silicon and nitrogen compositions with significant oxygen content and hydrogen incorporation of 10–20 and 17–21%, respectively. Atomic force microscopy measurements show a decrease in root mean square roughness after annealing for a variety of films. Prism coupling measurements show losses as low as 1.3, 0.3 and 1.5 ± 0.1 dB/cm at 638, 980 and 1550 nm, respectively, without the need for post-process annealing. Based on this study, we find that the as-deposited ECR-PECVD SiOxNy:Hz films have a suitable thickness, refractive index and optical loss for their use in visible and near-infrared integrated photonic devices.

1 February 2018 in Surface and Coatings Technology
Verified
Journal Article
Closed access
JMJ.W. Miller
J.W. Miller
ZKZ. Khatami
Z. Khatami
JWJ. Wojcik
J. Wojcik
Jonathan BradleyJonathan Bradley
Jonathan Bradley
PMPeter Mascher
Peter Mascher