José Matheus Vieira Matos

Ms. José Matheus Vieira Matos

Mining Engineering, Universidade Federal de Ouro Preto, Ouro Preto, Brazil
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Anais da Academia Brasileira de Ciências
Verified
Journal Article
Open access
PDF file
CRCaio O. Rodrigues
Caio O. Rodrigues
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
TSTatiana Barreto Santos
Tatiana Barreto Santos
ASAllan Erlikhman Medeiros Santos
Allan Erlikhman Medeiros Santos
Controlling ore dilution in underground mining is challenging. In this study, data from a Brazilian gold mine were analyzed, covering 70 chambers and 26 variables. Six key variables were identified through decision tree analysis, forming the basis of a predictive model using advanced soft computing techniques. The constructed Random Forest model (RF-A) significantly outperformed two predictive equations from the literature, achieving an R² of 0.9161 compared to 0.3009 and 0.1597 from the literary equations. Validation of RF-A with random subsampling resulted in a marginal decrease in the R² value to 0.3060, suggesting a nonlinear correlation between mining variables and dilution, highlighting the inadequacy of linear analysis methods. By dividing the dataset into three subsets representing different mineral bodies, three new Random Forest models (RF-CV, RF-CB, and RF-LJ) were created, with R² values of 0.5465, 0.5295, and 0.4525, respectively. These results underscore the need to tailor models to specific geological contexts and demonstrate the potential of machine learning techniques in predicting dilution in complex underground mining scenarios.

18 December 2025 in Soils and Rocks
Verified
Journal Article
Open access
PDF file
DMDanielle Aparecida Menezes
Danielle Aparecida Menezes
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
HLHernani Mota de Lima
Hernani Mota de Lima
TSTatiana Barreto Santos
Tatiana Barreto Santos
This study proposes a methodology to evaluate correlations between credible failure modes and risk controls for Tailings Storage Facilities (TSFs), considering its characteristics and similarity. Additionally, this research proposes a decision tree framework developed to serve as a reference for analyzing credible failure modes during the risk assessment of a TSF. A dataset of 66 collapsed TSFs with known failure modes was analyzed. Variables included processed ore type, construction material and method, height, volume, seismic risk, and climate. The dataset was assessed for representativeness and to identify potential correlations for predicting structure behavior related to failure modes. Results showed that 21% of dams failing due to seismic liquefaction were in very high seismic risk zones, with 18% located in temperate climates. Upstream construction methods exhibited significant associations with static liquefaction (21%), seismic liquefaction (19%), and overtopping (12%). Regarding dam material, 15% of failures due to seismic liquefaction involved specific materials. Height and volume had minimal influence on failure modes within the analyzed dataset. These findings demonstrate the influence of structural characteristics on failure modes, enabling the correlation of applicable risk controls with TSF management and governance.

1 January 2026 in Anais da Academia Brasileira de Ciências
Verified
Journal Article
Open access
PDF file
GMGuilherme A. Mendonça
Guilherme A. Mendonça
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
TSTatiana Barreto Santos
Tatiana Barreto Santos
The stability of stopes in underground mining is a critical factor for both operational safety and the economic viability of mining projects. Empirical methods, such as Potvin’s Stability Graph (1988), are widely used to predict stability conditions; however, their applicability may be limited in distinct geomechanical scenarios. In this context, this study proposes a quantitative approach based on multivariate regression for predicting dilution throughout the development of different stopes in underground mining. To achieve this, various regression techniques were tested, including linear, polynomial, exponential, and logarithmic models, aiming to predict unplanned dilution based on 18 independent variables related to operational, geotechnical, and structural parameters. The results indicated that second-degree polynomial regression exhibited the best performance, achieving a coefficient of determination (R2) of 82.6% and an absolute mean error below 4%. Statistical analysis revealed that variables such as vertical stress, stope depth, and specific drilling index significantly influence dilution prediction, highlighting the need for an integrated approach between geomechanical and operational factors. Thus, the findings of this study underscore the importance of developing methodologies tailored to local geomechanical conditions, contributing to the optimization of underground mining planning, the reduction of operational losses, and the improvement of extraction efficiency.

6 January 2025 in Revista de Geociências do Nordeste
Verified
Journal Article
Open access
PDF file
GNGustavo Henrique Nogueira
Gustavo Henrique Nogueira
LSLeonardo Alberto Sala
Leonardo Alberto Sala
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
TSTatiana Barreto Santos
Tatiana Barreto Santos
The Unified Soil Classification System (USCS) is widely used in geotechnical engineering, but it has limitations in classifying tropical soils due to characteristics such as the presence of saprolites or laterites. This study proposes a regional soil classification system for the mineral province of the Quadrilátero Ferrífero, in Brazil, aiming to enhance the understanding of soil behavior in the region. A total of 101 soil samples, both natural and compacted, were analyzed, including variables such as effective friction angle, cohesion, plasticity index, specific gravity of particles, and fines content. Principal Component Analysis (PCA) and k-means clustering were used to develop the proposed classification system. This categorizes the soils into three distinct classes (A, B, and C) based on their geotechnical parameters. The analysis showed that the proposed system outperforms the USCS in differentiating soil behavior in the Quadrilátero Ferrífero province, establishing a classification chart that explains 81.68% of the variability of the analyzed parameters. Compared to the USCS, the new system provides a more accurate tool for predicting soil behavior, being useful in foundation engineering, excavation projects, and other geotechnical applications in the region.

1 October 2026 in Mining
Verified
Journal Article
Open access
PDF file
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
TSTatiana Barreto Santos
Tatiana Barreto Santos
ASAllan Erlikhman Medeiros Santos
Allan Erlikhman Medeiros Santos
JGJadson Castro Gertrudes
Jadson Castro Gertrudes
MSMarsol de Oliveira Sol
Marsol de Oliveira Sol
GDGeraldo Sarquis Dias
Geraldo Sarquis Dias
Rock strength is a key parameter for mine planning and operational optimization, but conventional laboratory testing is costly and provides limited spatial coverage. This study develops a methodology for classifying operational rock-strength classes in a Brazilian iron ore mine using reverse circulation (RC) drilling data and machine learning. Approximately 700 m of drilling data from ten boreholes were analyzed using operational variables acquired by onboard sensors. Data consistency was assessed through twin-hole analysis using Principal Component Analysis (PCA) and LSTM-based autoencoders, while K-Nearest Neighbors (KNN) was used to assess the reproducibility of rule-based operational-state labels. Five supervised algorithms were subsequently evaluated for classifying four operational rock-strength classes assigned by depth correlation with adjacent diamond drillholes and supported by available UCS-based geotechnical records, rather than by direct UCS testing of each RC interval. Random Forest achieved the best internal performance, with a mean accuracy of 90.2% across 50 stratified random partitions, followed by SVM at 88.1%. External validation of Random Forest on an independent blind drillhole achieved 93.1% accuracy, correctly classifying 54 of 58 intervals. These results provide preliminary evidence of model transferability and highlight the potential of RC operational data for indirect rock-strength classification.

5 January 2026 in Revista de Geociências do Nordeste
Verified
Journal Article
Open access
LSLeonardo Alberto Sala
Leonardo Alberto Sala
José Matheus Vieira MatosJosé Matheus Vieira Matos
José Matheus Vieira Matos
TSTatiana Barreto Santos
Tatiana Barreto Santos
ASAllan Erlikhman Medeiros Santos
Allan Erlikhman Medeiros Santos
O conceito de modelo geotécnico em minas a céu aberto baseia-se em um produto definido por domínios ou unidades com comportamento geotécnico similar. O principal objetivo é apoiar os processos de design de taludes. A construção de um modelo geotécnico deve integrar quatro outros modelos: geológico, estrutural, geomecânico e hidrogeológico. Este artigo visa apresentar uma metodologia para a construção desses modelos utilizando geoestatística e modelagem implícita, e posteriormente, a integração desses modelos para criar um modelo de bloco geotécnico unificado. Este modelo contém informações sobre índice de resistência, grau de fraturamento, rugosidade, Índice de Resistência Geológica, anisotropia e condutividade hidráulica. A metodologia desenvolvida provou ser eficaz na integração dos modelos temáticos produzidos. A abordagem geoestatística reduziu a subjetividade na construção dos modelos, tornando este processo mais quantitativo. Este foi um dos principais diferenciais desta metodologia, pois permite a classificação da confiabilidade das informações geotécnicas atribuídas a cada bloco.