Blocky-rock masses are prone to dynamic slip along sand-filled joints under impact disturbance. The constraint normal to the joint and the size of the infill particles jointly influence their stability. To determine how axial load and particle-size affect dynamic slip, this study uses a custom-developed dynamic slip testing system for blocky-rock masses. Impact-disturbance tests are conducted under a constant lateral shear load with different axial load values and quartz-sand particle sizes. The block displacement evolves through three stages: stationary incubation, rapid slip, and deceleration to a stable state. When the axial load increases from 100 N to 400 N, residual slip displacement decreases by 87.52% to 90.12% across the particle size conditions. Residual slip displacement also follows an exponential decay with increasing axial load. Reducing particle size decreases both slip velocity and residual slip displacement, but its influence gradually weakens as the axial load increases. The difference in residual slip displacement between the coarse and fine particle conditions narrows from 0.460 mm to 0.030 mm. Strengthening the normal constraint compacts the granular layer and restricts particle movement, causing the dynamic slippage at sand-containing structural interfaces to gradually shift from being significantly influenced by the particle scale to being primarily controlled by the normal constraint.
30 March 2026 in International Journal of Civil Engineering
Chloride-induced corrosion reduces the tensile capacity of the reinforcement and the effective area of the concrete cross-section of reinforced concrete (RC) piles. This study presents a two-stage framework that reproduces localized multi-rebar corrosion and the subsequent lateral cyclic response in a single explicit analysis, so that corrosion damage is inherited by the loading stage rather than re-imposed: Stage I applies the corrosion expansion to solid rebar elements through a thermal analogy, and Stage II imposes cyclic lateral loading, capturing the coupled evolution of concrete damage and pile-soil interaction. The framework is validated against experiments on RC piles with one to three corroded rebars, reproducing the hysteresis loops, skeleton curves, and stiffness degradation, with the peak load of the uncorroded specimen within 6%. For a full-scale pile with six eccentrically corroded rebars subjected to multi-directional loading, the critical direction is the one that places the corroded reinforcement in tension, which can be identified from a corrosion survey alone. Therefore, assessing the bearing capacity of corroded marine piles should consider the unfavorable loading direction since adopting a single direction would overestimate the capacity by up to a factor of 1.8.