A chromatic confocal measurement method based on a phase Fresnel zone plate (FZP) is described. Strong dispersion of FZP results in significant axial focal shift. The axial dispersion curve is close to linear within a certain wavelength range determined by the quantitative calculation using the vectorial angular spectrum theory. A 11.27 mm diameter phase FZP with a primary focal length of 50 mm was processed using standard photolithography technology and used as the dispersive objective in a homemade chromatic confocal measurement system. The calibrated axial measurement range exceeds 16 mm, the axial resolution reaches 0.8 µm, and the measurement accuracy of displacement is better than 0.4%. This chromatic confocal sensor has been practically used in the measurement of step height, glass thickness, and 3D surface profile. The proposed method has the obvious characteristics of simplicity, greatly reduced cost and superior performance. It is believed that this sensing method has broad application prospects in glass, coating, machinery, electronics, optics and other industries.
Magnetometers based on nitrogen-vacancy (NV) centers in diamonds have promising applications in fields of living systems biology, condensed matter physics, and industry. This paper proposes a portable and flexible all-fiber NV center vector magnetometer by using fibers to substitute all conventional spatial optical elements, realizing laser excitation and fluorescence collection of micro-diamond with multi-mode fibers simultaneously and efficiently. An optical model is established to investigate multi-mode fiber interrogation of micro-diamond to estimate the optical performance of NV center system. A new analysis method is proposed to extract the magnitude and direction of the magnetic field, combining the morphology of the micro-diamond, thus realizing μm-scale vector magnetic field detection at the tip of the fiber probe. Experimental testing shows our fabricated magnetometer has a sensitivity of 0.73 nT/Hz1/2, demonstrating its feasibility and performance in comparison with conventional confocal NV center magnetometers. This research presents a robust and compact magnetic endoscopy and remote-magnetic measurement approach, which will substantially promote the practical application of magnetometers based on NV centers.
The axial focus number (the number of focal spots along the axial direction) and focus intensity of a micro-Fresnel zone plate (FZP) are analyzed from deep ultraviolet to infrared using the Fourier decomposition, the vectorial angular spectrum (VAS) theory, and the three-dimensional finite-difference time-domain (FDTD) method. For a low-numerical aperture (NA) micro-FZP (NA0.3), the axial high-order foci are suppressed and there is one single focus. A fast, precise, and cost-efficient additive manufacturing method, i.e. two-photon polymerization, is used to fabricate high-NA phase-type micro-FZPs. The experiment has validated the phenomenon of linear negative focal shift of a high-NA micro-FZP. This property can be particularly applied in precise measurement of micro-displacement, film thickness, micro/nano step height, and wavelength.
Nanowires have been widely studied due to their outstanding mechanical and electrical properties; however, their practical applications are limited to the lack of an effective technique for controlled assembly. In the present work, zinc oxide (ZnO) nanowire arrays were assembled via a combing process using a makeup brush and the nanodevice was fabricated. The current–voltage (I–V) and ultraviolet (UV) characteristics of the device indicate stable and repeatable electrical properties. The carbon monoxide (CO) sensing properties were tested at operating temperatures of 200, 300 and 400 °C. It was found that ZnO based sensor exhibited the highest sensitivity to CO at 300 °C due to the change of dominant oxygen species. Comparing with others result, the sensitivity of the fabricated sensor exhibits higher sensing performance. The sensing mechanism of the CO sensor is also discussed.