I. With growing interest in advanced nuclear reactors, there is an increasing need for reliable simulation tools to help evaluate their performance and safety under a wide range of operating condit...
Presented here is an application of model-order reduction to non-linear neutronic transients.The effort described extends previous work aimed to develop a ROM framework that can be used for different purposes, such as design optimization and propagating uncertainties.Here, the target applications is non-linear.The ROM was built using the POD-Galerkin projection and MDEIM for improved efficiency.By applying the method to the LRA benchmark, speed ups from 6 to 40 were achieved depending on the FOM spatial fidelity.The maximum relative error in the assemblies power was 10-5%.Moreover, the ROM was parameterized by POD-greedy sampling. For the parameterized ROM, the maximum relative error in the assembly power was 10-3 %, The method was implemented in the code Detran where only access to the system operator was needed, and; hence, the method is trivially invasive and could easily be implemented in modern deterministic diffusion codes.
Reliable simulation of graphite-moderated pebble bed reactors requires validation against integral experiments. This work validates the latest SCALE development version against the HTR-PROTEUS benchmark suite from the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhE). Eleven critical configurations were analyzed, including hexagonal close-packed (HCP), columnar hexagonal point-on-point (CHPOP), andnominally random pebble-bed arrangements, with variations in moderator to-fuel ratio and simulated water-ingress conditions. Criticality calculations were performed with the SCALE’s Shift Monte Carlo code using multiple nuclear data libraries in both continuous-energy and multigroup modes, and explicit modeling of pebbles. Recent Shift enhancements in the mesh acceleration for such stochastic geometries made the simulations efficient. In addition to criticality, the effective delayed neutron fraction and selected control rod worths were evaluated. Nuclear data sensitivity and uncertainty analyses were also performed. The calculations reproduced the main benchmark trends, with both ENDF/B-VIII.0 and ENDF/B-VIII.1 libraries yielding smaller keff bias, while the propagated nuclear-data induced uncertainty in keff remained near 0.7% for ENDF/B-VII.1, ENDF/B-VIII.0, and ENDF/B-VIII.1. These results support the use of SCALE for high-fidelity analysis of graphite-moderated pebble bed reactors systems.