Due to globalization and the resulting increase in competition on the market, products must be produced more and more cheaply, especially in series production, because buyers expect new variants or even completely new products in ever shorter cycles. Injection molding is the most important production process for manufacturing plastic components in large quantities. However, the conventional production of a mold is extremely time-consuming and costly, which creates a contradiction to the fast pace of the market. Additive tooling is an area of application of additive manufacturing, which in the field of injection molding is preferably used for the prototype production of mold inserts. This allows injection molding tools to be produced faster and more cheaply than through the subtractive manufacturing of metal tools. Material Jetting processes using polymers (MJT-UV/P), also called Polyjet Modeling (PJM), have a great potential for use in additive tooling. Due to the poorer mechanical and thermal properties compared to conventional mold insert materials, e.g. steel or aluminum, the previously used design principles cannot be applied. Accordingly, new design guidelines are necessary, which are developed in this paper. The necessary information is obtained with the help of a systematic literature research. The design guidelines are mapped in a uniform design guide, which is structured according to the design process of injection molds. The guidelines do not only refer to the constructive design of the injection mold or the polymer mold insert, but to the entire design process and describe the four phases of planning, conception, development and realization. Particular attention is paid to the special geometric designs of a polymer mold insert and the thermomechanical properties of the mold insert materials. As a result, design guidelines are available that are adapted to the special requirements of additive tooling of molds inserts made of plastics for injection molding. Keywords Design guidelines Material Jetting Additive Tooling Injection Molding mold inserts
The development of 4D-printing technology enables the fabrication of smart structures capable of transforming in response to external stimuli, offering potential for future minimally invasive biomedical applications. This study explores a direct 4D-printing approach for producing thermally actuated polylactic acid (PLA) components, focusing on self-expanding vascular stent prototypes. Unlike conventional 4D printing, which typically requires a separate post-printing programming step (e.g., heating, mechanical loading, cooling, and unloading), direct 4D printing embeds the programming phase directly into the layer-wise printing process by controlling the adjustment of process parameters, so that components are ready for shape transformation immediately after fabrication. A systematic experimental workflow was applied by combining a problem-solving methodology with action research and structured experimentation to identify and optimize the key parameters governing shape-shifting behavior. Bilayer plate structures were fabricated via fused filament fabrication (FFF) using multiple PLA material combinations and were thermally actuated under controlled conditions to characterize the influence of printing speed, printing temperature, and infill pattern on the magnitude and directionality of deformation. Building on these results, three functional demonstrators were developed, culminating in a grid-based cylindrical prototype that achieved approximately 5.8% radial expansion upon actuation at temperatures above 80 °C. Overall, the results suggest the fundamental technological feasibility of direct 4D printing as a manufacturing route for thermally actuated components, serving as a foundational proof-of-concept for future patient-specific, self-deploying medical devices.