Introduction The use of scaffolds in tissue engineering is becoming increasingly important as solutions need to be found to preserve human tissues such as bone or cartilage. Various factors, including cells, biomaterials, cell and tissue culture conditions, play a crucial role in tissue engineering. The in vivo environment of the cells exerts complex stimuli on the cells, thereby directly influencing cell behavior, including proliferation and differentiation. Therefore, to create suitable replacement or regeneration procedures for human tissues, the conditions of the cells’ natural environment should be well mimicked. Therefore, current research is trying to develop 3-dimensional scaffolds (scaffolds) that can elicit appropriate cellular responses and thus help the body regenerate or replace tissues. In this work, scaffolds were printed from the biomaterial polycaprolactone (PCL) on a 3D bioplotter. Biocompatibility testing was used to determine whether the printed scaffolds were suitable for use in tissue engineering. Material and Methods An Envisiontec 3D bioplotter was used to fabricate the scaffolds. For better cell-scaffold interaction, the printed polycaprolactone scaffolds were coated with type-I collagen. Three different cell types were then cultured on the scaffolds and various tests were used to investigate the biocompatibility of the scaffolds. Results Reproducible scaffolds could be printed from polycaprolactone. In addition, a coating process with collagen was developed, which significantly improved the cell-scaffold interaction. Biocompatibility tests showed that the PCL-collagen scaffolds are suitable for use with cells. The cells adhered to the surface of the scaffolds and as a result extensive cell growth was observed on the scaffolds. The inner part of the scaffolds, however, remained largely uninhabited. In the cytotoxicity studies, it was found that toxicity below 20% was present in some experimental runs. The determination of the compressive strength by means of the universal testing machine Z005 by ZWICK according to DIN EN ISO 604 of the scaffolds resulted in a value of 68.49 ± 0.47 MPa.
Background: Intervertebral disc degeneration is a prevalent condition and a major risk factor for disc herniation. Mechanical overload, aging, injury, and disease contribute to the annulus fibrosus’ structural failure, which allows nucleus pulposus material to escape and reduces the capacity to absorb shock. This study builds on previous investigations by evaluating additional thermoplastic polyurethane (TPU) filaments as potential materials for additively manufactured intervertebral disc replacements. Materials and Methods: Disc-shaped specimens (Ø50 × 10 mm) were fabricated using fused deposition modeling (FDM). A gyroid infill structure was employed with unit cell sizes ranging from 4 to 10 mm3 and wall thicknesses between 0.5 and 1.0 mm. The outer wall thickness varied from 0.4 to 0.8 mm. Four TPU filaments (Extrudr FlexSemiSoft, GEEE-TECH TPU, SUNLU TPU, and OVERTURE TPU) were tested, resulting in 36 parameter combinations per filament. Printed discs were examined via stereomicroscopy. Tensile testing was conducted according to DIN EN ISO 527-1 using Type 5A specimens. Mechanical performance under physiological loading was assessed through uniaxial compression tests, in which samples were compressed to 50% of their height while force–deformation curves were recorded. Target forces were defined as 4000–7500 N to maintain comparability with prior studies. Results: Across all filaments, a maximum of three parameter combinations per material achieved forces within the target range. Microscopy confirmed the dimensional accuracy of wall thicknesses with minimal deviation. Tensile strength values for GEEE-TECH, SUNLU, and FlexSemiSoft were comparable (10–11 MPa), while OVERTURE showed significantly lower strength (approximately 9 MPa). Tensile modulus values followed a similar trend: 25–30 MPa for three filaments and 17.5 MPa for OVERTURE. Conclusions: All four TPU filaments could be used to fabricate discs that met the mechanical requirements for compression. These results confirm that both the tested TPU materials and gyroid structures are suitable for potential intervertebral disc replacement applications.
In 4D printing, an additively manufactured component is given the ability to change its shape or function in an intended and useful manner over time. The technology of 4D printing is still in an early stage of development. Nevertheless, interesting research and initial applications exist in the literature. In this work, a novel methodical approach is presented that helps transfer existing 4D printing research results and knowledge into solving application tasks systematically. Moreover, two different smart materials are analyzed, used, and combined following the presented methodical approach to solving the given task in the form of recovering an object from a poorly accessible space. This is implemented by self-positioning, grabbing, and extracting the target object. The first smart material used to realize these tasks is a shape-memory polymer, while the second is a polymer-based magnetic composite. In addition to the presentation and detailed implementation of the methodical approach, the potentials and behavior of the two smart materials are further examined and narrowed down as a result of the investigation. The results show that the developed methodical approach contributes to moving 4D printing closer toward a viable alternative to existing technologies due to its problem-oriented nature.
Degenerative disc disease remains a primary cause of chronic back pain, yet current surgical treatments are often limited by the mechanical mismatch between implants and native intervertebral disc (IVD) tissue. This study investigates additively manufactured functionally graded Gyroid structures based on thermoplastic polyurethane (TPU) as biomimetic IVD replacements, focusing on the influence of geometry and material gradients on mechanical performance. Gyroid-based constructs were fabricated by multi-material fused filament fabrication using TPU filaments of different stiffness. Their mechanical performance was evaluated under static and dynamic compressive loading. Finite element analysis was performed to investigate stress distribution within the Gyroid architecture, while micro-computed tomography (µCT) was used to assess manufacturing-related defects and structural integrity before and after 700 000 loading cycles. All investigated structures exhibited stable and reproducible mechanical behavior. However, only a single geometric configuration reached the targeted physiological load range of 4000–8000 N, irrespective of the material combination. The incorporation of an additional compliant TPU phase did not significantly alter the global force–deformation response compared with two-material configurations, indicating that structural geometry predominantly governs the compressive mechanical behavior. Dynamic testing demonstrated consistent damping capacities of approximately 20% across all configurations together with stable stiffness, storage modulus, and loss modulus during fatigue loading. Finite element analysis revealed homogeneous load distribution with localized stress concentrations at the curved Gyroid junctions. Quantitative µCT analysis showed no measurable increase in micro-porosity, void fraction, or interfacial defects after 600 000 loading cycles. The findings demonstrate that the mechanical performance of TPU-based Gyroid IVD constructs is primarily governed by architectural design rather than material gradients under compressive loading. The combined experimental, numerical, and µCT analyses confirm the mechanical robustness and structural stability of the proposed functionally graded Gyroid structures, highlighting architecture-driven design as a promising strategy for mechanically compatible IVD replacements.
The development of 4D-printing technology enables the fabrication of smart structures capable of transforming in response to external stimuli, offering potential for future minimally invasive biomedical applications. This study explores a direct 4D-printing approach for producing thermally actuated polylactic acid (PLA) components, focusing on self-expanding vascular stent prototypes. Unlike conventional 4D printing, which typically requires a separate post-printing programming step (e.g., heating, mechanical loading, cooling, and unloading), direct 4D printing embeds the programming phase directly into the layer-wise printing process by controlling the adjustment of process parameters, so that components are ready for shape transformation immediately after fabrication. A systematic experimental workflow was applied by combining a problem-solving methodology with action research and structured experimentation to identify and optimize the key parameters governing shape-shifting behavior. Bilayer plate structures were fabricated via fused filament fabrication (FFF) using multiple PLA material combinations and were thermally actuated under controlled conditions to characterize the influence of printing speed, printing temperature, and infill pattern on the magnitude and directionality of deformation. Building on these results, three functional demonstrators were developed, culminating in a grid-based cylindrical prototype that achieved approximately 5.8% radial expansion upon actuation at temperatures above 80 °C. Overall, the results suggest the fundamental technological feasibility of direct 4D printing as a manufacturing route for thermally actuated components, serving as a foundational proof-of-concept for future patient-specific, self-deploying medical devices.