Marcos Antonio Coelho Berton

Dr. Marcos Antonio Coelho Berton

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2021 in International Journal of Polymer Science
Verified
Journal Article
Open access
PDF file
NPNicolas Augusto Paolini
Nicolas Augusto Paolini
ANAlexandre Gonçalves Cordeiro Neto
Alexandre Gonçalves Cordeiro Neto
APAlana Cristine Pellanda
Alana Cristine Pellanda
AJAgne Roani de Carvalho Jorge
Agne Roani de Carvalho Jorge
BSBryan de Barros Soares
Bryan de Barros Soares
STSabu Thomas
Sabu Thomas
The objective of the current research is to evaluate and compare the corrosion protection efficiency of the microcapsules containing tung oil and copaiba oil using stereoscopic images, electrochemical tests, open circuit potential (OCP), and polarization curves (Tafel analysis). Carbon steel plates were painted with three different coating systems: (a) a coating system with an automotive primer which served as the control, (b) a coating system with microcapsules containing 3% tung oil, and (c) a coating system with microcapsules containing 3% copaiba oil. A crosscut was performed using a scalpel on the coating surfaces to promote the release of the oils, and after drying, electrochemical cells were assembled using electrolyte 3% NaCl. From OCP analyses, it was verified that the coating system containing tung oil loaded microcapsules obtained more positive final values than the control system and the coating system containing copaiba oil loaded microcapsules. The stereoscope images corroborate the OCP results, and the polarization curve analyses also indicated that the microcapsules containing tung oil offer better corrosion protection than the other systems studied.

2 March 2021 in International Journal of Polymer Science
Verified
Journal Article
Open access
PDF file
APAlana Cristine Pellanda
Alana Cristine Pellanda
ANAlexandre Gonçalves Cordeiro Neto
Alexandre Gonçalves Cordeiro Neto
AJAgne Roani de Carvalho Jorge
Agne Roani de Carvalho Jorge
MBMarcos Antonio Coelho Berton
Marcos Antonio Coelho Berton
JFJoão Batista Floriano
João Batista Floriano
PPPoornima Vijayan P
Poornima Vijayan P
Layered double hydroxides (LDH) are lamellar structures with positively charged laminates and charge-compensating interlayer anions. The ion-exchange capacity of LDHs makes them as promising hosts for corrosion inhibitor anions with stimulus-responsive release and self-healing anticorrosion. In the current work, LDHs loaded with two different corrosion inhibitors (nitrogen oxides and benzotriazole) were evaluated for their ion-exchange capacity and autonomic protection against corrosion on carbon steel. Studies on nitrogen oxide-loaded LDH (NOx-LDH) showed that nitrogen oxides were successfully intercalated in LDH structure, which were released in chloride media. Open Circuit Potential (OCP) results showed that NOx-LDH extract shifted OCP to nobler values, indicating the protection of metal. For benzotriazole-loaded LDH (BTZ-LDH), the results indicated the presence of benzotriazole in the structure, but its release was not observed. OCP results showed no significant increase of carbon steel protection, corroborating with the conclusion that benzotriazole ions did not migrate to metal surface. Considering these results, the insertion of NOx-LDH in an automotive primer was proceeded, under three different concentrations (0.2. 1.0, and 3.0). Electrochemical impedance spectroscopy (EIS) showed that the more effective NOx-LDH concentration on corrosion delay was 0.2, which better balanced protection level conferred by LDH with a possible loss on effectiveness of coating due to increase in porosity.

9 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FCFrancyelle Calegari
Francyelle Calegari
Isabel de SousaIsabel de Sousa
Isabel de Sousa
Mario FerreiraMario Ferreira
Mario Ferreira
MBMarcos Antonio Coelho Berton
Marcos Antonio Coelho Berton
CMCLÁUDIA MARINO
CLÁUDIA MARINO
João TedimJoão Tedim
João Tedim
Sodium carboxymethylcellulose (CMC-Na) microparticles, containing corrosion inhibitor benzotriazole (BTA), were prepared using different spray drying processing parameters, with the purpose of future application in protective coatings for the delivery of corrosion inhibitors. The effects of the processing parameters, such as inlet temperature and spray flow rate, are discussed herein. The biopolymeric CMC-Na microparticles obtained were characterized morphologically by SEM and TEM, and their release profile studied by UV-Vis. The results show that the prepared microparticles (microspheres) were homogeneous, spherically shaped and of a matrix-type nature. Additionally, it was observed that the inlet temperature and spray flow rate significantly influenced the release profiles and process yields. From the different process parameters tested, it was found that the best conditions to achieve higher process yields, higher encapsulation efficiencies and better release properties, were an inlet temperature of 170 °C, a pump rate of 2.5 mL/min, and a drying air-flow rate of 440 L/h.

15 February 2023 in Batteries
Verified
Journal Article
Open access
PDF file
SRShirley Leite dos Reis
Shirley Leite dos Reis
RGRobson Lopes Grosso
Robson Lopes Grosso
JKJuliane Kosctiuk
Juliane Kosctiuk
MFMarianne Franchetti
Marianne Franchetti
FOFrancisca Oliveira
Francisca Oliveira
MBMarcos Antonio Coelho Berton
Marcos Antonio Coelho Berton
Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy.

18 August 2026 in Materials
Verified
Journal Article
Open access
PDF file
SRShirley Leite dos Reis
Shirley Leite dos Reis
CGCyrille Franck Noel Gonin
Cyrille Franck Noel Gonin
TMThiago Neves Machado
Thiago Neves Machado
MBMarcos Antonio Coelho Berton
Marcos Antonio Coelho Berton
RMReginaldo Muccillo
Reginaldo Muccillo
EMEliana Navarro dos Santos Muccillo
Eliana Navarro dos Santos Muccillo
In this study, the relationship between the microstructure and electrical conductivity of doped lanthanum gallate was investigated to identify the origin of the relatively high resistivity of the grain boundaries in this ceramic solid electrolyte. LaGaO3 containing acceptor dopants, Sr and Mg, was chemically synthesized and consolidated by field-assisted sintering technology. The relative density achieved 98% upon sintering at 1200 °C, and no intragrain porosity was found. The microstructure consisted of submicron-sized grains and exhibited a predominantly transgranular fracture mode. Structural characterization evidenced that all sintered samples display the characteristic orthorhombic crystal structure. Rietveld analysis revealed a secondary phase content of only ~0.71% in samples sintered at 1200 °C. In addition, Raman spectra revealed only the allowed characteristic vibrational modes expected for doped lanthanum gallate. The electrical conductivity was determined by impedance spectroscopy analysis. The bulk conductivity of sintered samples was found to be independent of the sintering temperature. Analysis of the grain boundary resistivity revealed a dependence on the mean grain size, which constricts the pathway of the charge carriers, leading to the formation of space charge layers. The total activation energy determined for conduction is 0.94 eV.

1 January 2024 in Materials Research
Verified
Journal Article
Open access
PDF file
CCCaio Marcello Felbinger Azevedo Cossú
Caio Marcello Felbinger Azevedo Cossú
HFHeverson Renan de Freitas
Heverson Renan de Freitas
MCMonique Osório Talarico da Conceição
Monique Osório Talarico da Conceição
LRLiana Alvares Rodrigues
Liana Alvares Rodrigues
MBMarcos Antonio Coelho Berton
Marcos Antonio Coelho Berton
CNCarlos Angelo Nunes
Carlos Angelo Nunes
For decades, lead-acid batteries have been supplying power to electrical systems through redox reactions involving Pb and PbO2. However, the energy supply capacity is inherently constrained by low energy density and challenges associated with charge/discharge cycles. Studies have indicated that additions of C to the composition of the active mass improve the electrochemical properties of batteries. This work aims to produce, characterize the microstructure and evaluate the electrochemical properties of Pb-Carbon composites, comparing different types of C (graphite, graphene and xerogel). The samples were produced through powder metallurgy, pressed at 550 MPa and sintered at 320°C-48 h. The microstructure was characterized by XRD, SEM/EDS, and Vickers microhardness. Electrochemical analyses were evaluated through OCP, polarization, and cyclic voltammetry (CV) measurements in a solution of 4.91 mol•L-1 of H2SO4. Microstructural characterizations revealed dispersions of C particles in the Pb matrix and an increase in the microhardness of the composites. Electrochemical analyses showed an increase in polarization resistance and a reduction in the corrosion rate compared to Pb. CV curves, demonstrated that C particles enhanced electrical conductivity for the formation of PbSO4 and PbO2, allowing greater absorption of electrical overpotentials when compared to Pb, thereby improving charge/discharge cycles in positive grids.