Aroma compounds are known to be efficient active agents for a broad range of applications (antimicrobial, anti-oxidant, insect repellent…) that are highly sought when aiming at extending shelf life of food or biological products. However, they are intrinsically odorant and volatile at ambient temperature, which restricts the processing routes used to introduce them in a polymeric matrix and can affect their mode of action and limit efficiency. Indeed, due to their high sensitivity toward temperature they can be lost or transformed during processing. Acting after being released in the headspace, their concentration has to be controlled to avoid any odorant contamination of the targeted products. Hence, the ability for an aroma compound to be retained in a polymeric matrix, and then released when submitted to a triggering effect, are the two main requirements that should be satisfied. The volatile nature of the aroma compound offer the possibility when introduce in the packaging to act by direct or indirect contact with the product and thus to be used in different ways; as a coating layer directly applied on the product surface, as a self-supported film or as coated paper when associated with a paper sheet, as well as an object that could be inserted in the package. As biopolymers such as proteins and polysaccharides are able to retain aroma compounds but also to favor their release by modification of their structure when the relative humidity (RH) and temperature change, they are relevant carriers of these specific aroma compounds. Examples of how active packaging systems with limonene, eugenol and carvacrol as active agents were designed and elaborated. These examples will be presented with a special focus on the processing conditions and the way to improve their aroma compound retention and the release control (biopolymer nature, cyclodextrin clay addition…). Avrami's equation has been used to model the transfer of aroma compound and to advantageously compare it taking into account the mechanism in relation to the biopolymer structural changes.

Vine shoots are lignocellulosic agricultural residues. In addition to being an interesting source of polyphenols, they can be used as fillers in a poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) matrix to decrease the overall cost and to propose an alternative to non-biodegradable fossil-based materials. The objective of the present work was to investigate how the incorporation of vine shoots fillers and a preliminary polyphenol extraction step could impact the biodegradability of biocomposites. Biocomposites (20 wt %) were produced by microcompounding. The biodegradation of materials was assessed by respirometric tests in soil. The negative impact of polyphenols on the biodegradability of vine shoots was confirmed. This was supported by crystallinity measurements and scanning electron microscopy (SEM) observations, which showed no difference in structure nor morphology between virgin and exhausted vine shoots particles. The incorporation of vine shoots fillers in PHBV slightly accelerated the overall biodegradation kinetics. All the biocomposites produced were considered fully biodegradable according to the French and European standard NF EN 17033, allowing the conclusion that up-cycling vine shoots for the production of lignocellulosic fillers is a promising strategy to provide biodegradable materials in natural conditions. Moreover, in a biorefinery context, polyphenol extraction from vine shoots has the advantage of improving their biodegradability.

The dataset reports the impact of incorporating commercial compostable plastics into a full-scale open-air windrow composting process using household-separated biowaste. Two batches were prepared from the same biowaste mixture: one as a control and the other with 1.28 wt% of certified compostable plastics. The degradation of the materials was monitored over four months by regular sampling, which matched the industrial composting duration. The final compost was evaluated for agronomic quality and safety. Life-cycle assessment was performed based on data collected on process resource usage. The dataset includes an extensive review of full-scale composting experiments, raw and processed data on the composting process, biodegradation of the materials, disintegration kinetics, and the evolution of morphological parameters of the plastics. Industrial-scale data are very rare and can be compared with lab-scale data to assess the differences in compostable material behavior due to scaling up the process.