The development of nuclear fusion as a safe and virtually limitless power source is receiving growing attention in the context of looming energy crisis and climate change. ITER project stands as the flagship international initiative and is advancing steadily. The construction of the Tokamak Complex is nearly finished, and the assembly of core components has begun on site. Simultaneously, the design is being finalized, and the safety case is becoming more concrete. Current approaches to radiation safety demonstration using 3D nuclear analysis with the Monte Carlo code MCNP require sophisticated artifacts to sew together simulations in separate models for the Tokamak and the rest of the facility. This results in cumbersome studies and, consequently, challengeable conclusions. To address this issue, we have built the an integral MCNP model of the ITER facility: the ITER full model. Along with improvements to the D1SUNED code, we illustrate its computational practicality and pertinence in two meaningful simulations for ITER safety case. This work represents the culmination of a two-decade-long effort of ITER modelling aiming to demonstrate adequate radiation safety. Beyond supporting the remaining design tasks, this model simplifies the corresponding 3D nuclear analysis and improves the robustness of the ITER safety case.
This study presents the first comprehensive computation of nuclear heat deposition in the ITER Vacuum Vessel (VV) using the E-lite model, a complete 360° reference neutronics model of the ITER tokamak. Accurate characterization of nuclear heat in the ITER VV is critical for maintaining safe operation. Significant updates to E-lite were made, focusing on two key areas: improved blanket representation and inclusion of previously missing components. Our findings indicate a total nuclear heat deposition of 18.87 MW in the VV, marking a 4.4% increase from previous estimates. Conservative maximum power deposition during a DT 500 MW inductive pulse is estimated at 20.8 ± 2.3 MW (1 σ ). Detailed 3D maps of nuclear heat deposition were generated, revealing energy distribution across different VV regions and identifying areas with volumetric power deposition above 0.61 W cm −3 , a threshold to prevent mechanical stress. Detailed 3D maps of nuclear heat deposition provide critical input for the thermo-hydraulic analyses necessary for ITER design verification.