ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs within Europe is contributing to the preparation of ITER scientific exploitation and operation and aspires to exploit ITER outcomes in view of DEMO. The paper provides an overview of the major progress obtained recently, carried out in the frame of the new (initiated in 2021) EUROfusion work-package called ‘Preparation of ITER Operation’ (PrIO). The overview paper is directly supported by the eleven EUROfusion PrIO contributions given at the 29th Fusion Energy Conference (16–21 October 2023) London, UK [www.iaea.org/events/fec2023]. The paper covers the following topics: (i) development and validation of tools in support to ITER operation (plasma breakdown/burn-through with evolving plasma volume, new infra-red synthetic diagnostic for off-line analysis and wall monitoring using Artificial Intelligence techniques, synthetic diagnostics development, development and exploitation of multi-machine databases); (ii) R&D for the radio-frequency ITER neutral beam sources leading to long duration of negative deuterium/hydrogen ions current extraction at ELISE and participation in the neutral beam test facility with progress on the ITER source SPIDER, and, the commissioning of the 1 MV high voltage accelerator (MITICA) with lessons learned for ITER; (iii) validation of neutronic tools for ITER nuclear operation following the second JET deuterium–tritium experimental campaigns carried out in 2021 and in 2023 (neutron streaming and shutdown dose rate calculation, water activation and activated corrosion products with advanced fluid dynamic simulation; irradiation of several materials under 14.1 MeV neutron flux etc).
This work presents the results following the first irradiation of ITER materials samples in a tokamak D–T plasma environment operating at significant fusion power. The materials exposed to this nuclear environment at the Joint European Torus during the DTE2 experimental campaign that took place in 2021 include representative ITER samples from various components such as poloidal field coil jacket samples, toroidal field coil radial closure plate steels, EUROFER 97 steel, W and CuCrZr materials from the divertor, Inconel-718 and 316L stainless steel for blanket modules, as well as vacuum vessel forging samples. The experimental results discussed include high-resolution gamma spectrometry measurements and analysis conducted with the post-irradiated samples, of which there were 68 in total. These samples were exposed through different experimental campaigns, including deuterium, deuterium–tritium and tritium phases. Diagnostics that supported the analysis included 25 dosimetry foil-based neutron diagnostics and two ‘VERDI’ neutron spectrometry diagnostics. A further 12 samples for positron annihilation spectroscopy were also irradiated. The irradiation of all these samples took place in a long-term irradiation assembly located near the JET vacuum vessel. The post-irradiation analysis of the ITER material samples has yielded valuable insights into their material activation levels and radiation fields. Comparative assessments between experimental measurements and comprehensive neutronics simulations have demonstrated a significant level of agreement in this work, while also revealing some discrepancies in specific material instances. The data and interpretation from this work not only serve as a robust experimental foundation for enhancing the precision and predictability of neutronics simulation approaches for ITER and next-step devices but also present some opportunities for the refinement of simulation methodologies. In light of these findings, a series of recommendations have been proposed, aimed at improving confidence in nuclear predictions associated with materials that have been exposed to fusion nuclear environments and advancing understanding in this important domain.
The ITER equatorial visible and infrared Wide Angle Viewing System (WAVS) will play a major role in the protection of plasma facing components by providing surface temperature measurements of these components. It will also image the plasma emission in the visible range. The WAVS is composed of 15 lines of sight located in four Equatorial Ports (EPs) 3, 9, 12, and 17. Its development is being carried out by the Consortium constituted by CEA, CIEMAT, INTA, and Bertin Technologies, within grant contracts financed by F4E. In the EP12, the in-vessel and ex-vessel components of the WAVS are at their final design phase. This article presents an overview of the opto-mechanical design of the WAVS in the EP12 presented at the final design review.