The effect of unconventional heat treatment and electrochemical behavior on API 5L X60 steel is evaluated by electrochemical processes/mechanisms associated with corrosion. The susceptibility to hydrogen absorption in soil solutions representative of the State of Campeche, Mexico, was evaluated. In the energy, chemical, metallurgical/mechanical, and petrochemical industries, API 5L X60 steel is used for storage tanks and pipelines for the transportation and transmission of oil and gas. These steels are in contact with different aggressive environments and are therefore subject to different degrees of corrosion and even cracking. The determination of the absorbed atomic hydrogen makes it possible to assess the susceptibility to hydrogen damage through the outer layers of the pipes. To study the influence of microstructure on the susceptibility to hydrogen absorption in API 5L X60 steel with and without heat treatment at 1050 °C for 30 minutes, the material was characterized by Scanning Electron Microscopy (SEM) and the electrochemical behavior of the metal under simulated CAM conditions, using Potentiodynamic Polarization Curves (PPC) and Oxidation and Hydrogenation Tests. The results indicated a change in the microstructure presenting polygonal grains of β (ferrite), α (perlite) and non-metallic inclusions in the matrix, which generates a significant influence on its ability to absorb atomic hydrogen in the subsurface layers. The kinetics revealed variability in the corrosion potential and passivity mechanism related to the interaction of the microstructure of the material and the chemistry of the solution. In short and intermediate periods of electrochemical charge, a higher corrosion rate is exhibited.
In this study, an Al–20 wt.% Mg alloy was synthesized to systematically correlate its electrochemical behavior in synthetic seawater with the microstructural evolution induced by heat treatment at 190, 300, and 350 °C for 6 h. The samples characterized by SEM and XRD reveal a progressive morphological evolution of the β–Al3Mg2 intermetallic phase. The open circuit potential, the potentiodynamic polarization and the electrochemical impedance spectroscopy showed that this microstructural evolution increased the microgalvanic corrosion, promoting passive-film breakdown, and reducing charge-transfer resistance. The Al–20 wt.% Mg alloy treated at 350 °C exhibited the highest corrosion current density, associated with β–Al3Mg2. These results demonstrated that controlling beta-phase precipitation through heat treatment provides an effective approach to tune the electrochemical behavior of high-magnesium aluminum alloys.