Bambang Bakri

Dr. Bambang Bakri


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2024 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
AAA. Arwin Amiruddin
A. Arwin Amiruddin
MTM. Tumpu
M. Tumpu
PRParea R. Rangan
Parea R. Rangan
RIRita Irmawaty
Rita Irmawaty
BBBambang Bakri
Bambang Bakri
MAMansyur
Mansyur
Rice straw waste, among other issues, is a significant source of air pollution and methane emissions from biological decomposition. This study examines the use of Rice Straw Ash (RSA), when combined with Fly Ash (FA) and Laterite Soil (LS), as a pozzolan in cementitious systems. The study's purpose is to examine the microstructure and compressive strength of a geopolymer mortar composed of FA, RSA, and LS. The RSA is activated with sodium hydroxide (NaOH), an alkaline activator, with concentrations of 6, 12, and 15 M NaOH. After air and water curing for 3, 7, and 28 days, the compression strength of the geopolymer mortar was tested. To determine the dominant compound of the pozzolan reactions that were generated in cementitious systems, Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) were employed. When geopolymer mortar is cured in air and water, its compressive strength increases with age. This is due to the fact that RSA, FA, and LS have the ability to form iron oxide (Fe3O4) in the amorphous phase and have a strong bond with alumina (Al2O3) and silica (SiO2). The material's fineness affects its compressive strength as well. This study intends to replace cement in mortar and concrete utilizing environmentally friendly materials. Furthermore, the creation of geopolymer material usually requires the use of oven heat to enhance the geopolymerization procedure. However, this study shows that this method does not require oven heat.

28 October 2014 in Journal of Water Supply: Research and Technology—AQUA
Verified
Journal Article
Closed access
PDF file
BBBambang Bakri
Bambang Bakri
YAY. Arai
Y. Arai
TIT. Inakazu
T. Inakazu
AKA. Koizumi
A. Koizumi
SPS. Pallu
S. Pallu
HYH. Yoda
H. Yoda
A water distribution network is the most expensive component of a water supply system; consequently, the overall planning, installation, and rehabilitation processes should be implemented accurately and carefully. The main issue that developing countries are facing is how to optimize the distribution network to meet increasing water demand. To tackle the issue, this paper proposes a new concept for rehabilitation and expansion of a water distribution network while ensuring cost-effectiveness and adequate water pressure. The main framework of the pipe network is formulated based on the concept of a ‘trunk/limb mains reinforced pipe system’. Reinforcement of trunk/limb mains in the network is carried out selectively, requiring proper selection of pipelines and of trunk/limb pipe diameters. A multi-step genetic algorithm was developed to obtain the objective of selecting an optimal solution design for pipeline selection and trunk/limb mains diameters. To clarify the effectiveness of this concept, cost analysis was performed. The result indicates that application of this method offers advantages for rehabilitation and expansion, in that not only meeting increasing water demand but also cost-effectiveness and desirable hydraulic conditions can be achieved in the network.

2 February 2025 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
GSGatok Hasan Syamsuddin
Gatok Hasan Syamsuddin
MPM. Saleh Pallu
M. Saleh Pallu
FMF. Maricar
F. Maricar
BBBambang Bakri
Bambang Bakri
Irrigation channels are a vital component of an agricultural system, functioning to distribute water to agricultural land and support food security. The Saddang irrigation area, one of the main irrigation regions in Indonesia, plays a crucial role in enhancing agricultural productivity. However, the sediment accumulation in irrigation channels can significantly impact water distribution efficiency and environmental quality. The current research aims to analyze the influence of flow parameters during the rainy and dry seasons, examine the relationship between seasonal changes and sediment transport, and assess the impact of sediment discharge in the primary channel of the Saddang irrigation area. The tests conducted included sieve analysis, specific gravity, sediment concentration, and hydrometer analysis. Based on the research results, the average sediment discharge during the rainy season in the primary channel of the Saddang irrigation area is 2,702 tons/day, while during the dry season, the average sediment discharge is 100 tons/day. The ratio of the average sediment discharge between the rainy and dry seasons is 27:1. Additionally, linear equations were obtained to predict sediment discharge in the primary channel of the Saddang irrigation area. For the rainy season, the linear equation used is y = 857.67x - 1618.3, while for the dry season, it is y = 38.811x - 79.937. These equations have a validation rate of 98% between the linear equation and the actual calculation results, indicating high accuracy in modeling sediment discharge in the channel.

24 March 2021 in Geomatics and Environmental Engineering
Verified
Journal Article
Open access
BBBambang Bakri
Bambang Bakri
KAKhaeryna Adam
Khaeryna Adam
ARAmran Rahim
Amran Rahim
In this study, we model extreme rainfall to study the high rainfall events in the province of South Sulawesi, Indonesia. We investigated the effect of the El Nino South Oscillation (ENSO), Indian Ocean Dipole Mode (IOD), and Madden–Julian Oscillation (MJO) on extreme rainfall events. We also assume that events in a location are affected by events in other nearby locations. Using rainfall data from the province of South Sulawesi, the results showed that extreme rainfall events are related to IOD and MJO.

8 December 2025 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
EAErwin Affandy
Erwin Affandy
MPMuhammad Saleh Pallu
Muhammad Saleh Pallu
FMFarouk Maricar
Farouk Maricar
BBBambang Bakri
Bambang Bakri
Structural collapse in bridges frequently results from localized scouring around piers induced by downflow and horseshoe vortices. This study examines the impact of collar diameter and installation height on scour reduction in a cylindrical pier model with circular gaps. A laboratory experiment was performed in a flume utilizing a clear-water scour methodology. The experiment employed a cylindrical pier with a diameter of 3 cm and an average flow velocity of 0.23 m/s. The collar design modifications comprised three outer diameters (2D, 2.5D, and 3D) and two installation heights (hc = 0 cm and hc = 3 cm). The protection efficiency (β) was assessed by evaluating the decrease in the maximum scour depth (dsmax) following an estimated equilibrium period of 45 min. The results demonstrate that the application of collars markedly decreased the scour depth. An inverse relationship exists between the collar installation height and protection efficiency. Specifically, positioning the collar at the channel bottom (hc = 0 cm) was more effective in reducing scouring than positioning it at hc = 3 cm. Moreover, the protection from scouring increases with the outside diameter of the collar. The main findings indicated that the collar with the greatest diameter of 3D and positioned on the channel bottom surface (hc = 0 cm), attained the highest efficiency, namely a scouring reduction exceeding 51.93% relative to unprotected pillars. It was concluded that a large diameter and low placement are essential for effectively disrupting the water vortex, providing a viable solution for bridge pillar scouring issues.

16 January 2024 in Research Square
Verified
Preprint
Open access
PDF file
MCMuhammad Anshari Caronge
Muhammad Anshari Caronge
YAYasuhiro Arai
Yasuhiro Arai
KIKaito Ito
Kaito Ito
TKTakaharu Kunizane
Takaharu Kunizane
小明小泉 明
小泉 明
BBBambang Bakri
Bambang Bakri
In recent years, leakage detection models using artificial intelligence have been widely used by researchers. In this study, acoustic sound data were recorded at 10 observation points, focusing on ductile iron pipe and vinyl polyethylene. Leakage detection models were built using recurrence plots (RPs) and a convolutional neural network (CNN). Using the same number of RPs for training data and testing data, we analyzed the effect of data variations on model performance. The results showed that our proposed approach can improve accuracy at several points, although the amount of training data information was advantageous in previous work. There were cases in previous work that had poor accuracy, but when implementing our proposed approach, it improved the accuracy to over 80% when using the 8-point model. The increase in accuracy depends on which interval is used in the test data because each interval contains information about different properties. For multi-point models, the effect of increasing the number of RPs and data variations was not clarified in the previous work. However, our study confirmed that the increase in data variation contributed more than the RP number.