A possible way to improve the structural safety and robustness of precast building structures is to develop effective precast frame systems with layered beams, which combine prefabricated parts with cast-in situ ordinary concrete, high-performance concrete, fiber concrete, or FRP. The paper provides a new type of precast reinforced concrete frame system with layered beams for rapidly erected multi-story buildings resistant to accidental actions. Using a combination of the variational method and two-level design schemes, a simplified analytical model has been developed for structural analysis of the precast reinforced concrete frame system, both for serviceable and ultimate limit states as well as for accidental actions. The proposed model allows for determining shear deformations and the formation and opening of longitudinal cracks in the intermediate contact zone between precast and monolithic parts of reinforced concrete structural elements of the frame, as well as the formation and opening of normal cracks because of the action of axial tensile force or bending moment in these elements. The design model was validated by comparing the calculated and experimental data obtained from testing scaled models of the precast reinforced concrete frame system with layered beams. The paper investigates and thoroughly analyzes the factors affecting the stiffness and bearing capacity of the intermediate contact zone, discusses the criteria for the formation of shear cracks along the contact zone of precast and monolithic concrete, and examines the change in the stiffness and dissipative properties of layered elements at different stages of their static–dynamic loading. The robustness of the experimental models of the structural system was not ensured under the specified load, section dimensions, and reinforcement scheme. Following an accidental action, longitudinal cracks were observed in the contact joint between the monolithic and prefabricated parts in the layered beams. This occurred almost simultaneously with the opening of normal cracks in adjacent sections. A comprehensive analysis of the results indicated a satisfactory degree of agreement between the proposed semi-analytical model and the test data.
31 December 2018 in IOP Conference Series: Materials Science and Engineering
A fundamentally new methodology for the study of the biotechnosphere and the functioning of life support systems on the principles of city symbiosis and the environment is proposed. This approach contributes to the formation of a new conceptual scheme of public interests rethinking and basing on it facilitates the development of urban environment reconstruction methods. The humanitarian balance of the biotechnosphere was adopted as the main criterion for the analytical assessment of the dynamics of system changes in the social, demographic, environmental and economic indicators of the state territories development. Balance relations of the biotechnosphere are based on the hypothesis of the presence of stable functional relationships between the changing in the course of time characteristics of the state of the components and the components of the socio-natural and technical life-supporting systems. As the variables of the quantitative analysis the author offers generalized indicators characterizing compatibility of the urbanized territories with the environment and the level of city functions realization, based on the values of normalized and necessary from the point of parameters of human potential development.
1 January 2017 in Journal of Applied Engineering Science
The article deals with the estimation of the dynamic increase of stresses in the element made of the composite two-component material such as reinforced concrete, that appears when local destruction of the concrete matrix (crack formation) occurs. When the brittle fracture of the concrete occurs the stresses acting in the stretched concrete are transmitted to the reinforcing bars instantaneously that leads to longitudinal oscillations. In this moment stresses acting in the reinforcing bars can be higher than ultimate stresses. Hence progressive collapse of a structure is possible. It is presented general solution of the forced longitudinal oscillations problem. Displacement and stress increment equations are given. General solution is illustrated by analysis of a progressive collapse of a large-panel folded shell when local destruction of concrete matrix in the tightening element occurs.
28 November 2023 in Scientific journal “ACADEMIA. ARCHITECTURE AND CONSTRUCTION”
Предложена методика расчёта устойчивости конструктивно и физически нелинейных систем железобетонных каркасов многоэтажных зданий в запредельных состояниях при структурных перестройках, вызванных особыми воздействиями. Определение напряжённо-деформированного состояния в рассматриваемой конструктивной системе выполнено по деформированной схеме с учётом влияния продольного изгиба, физической нелинейности и изменения напряжённо-деформированного со-стояния элементов вследствие структурной перестройки. При этом динамические догружения в элементах конструкций определены квазистатическим методом. Матрица жёсткости конструктивной системы с упругоподатливыми закреплениями узлов сопряжения стержневых железобетонных элементов получены с использованием метода начальных параметров. Двумерная задача расчёта напряженно-деформированного состояния элемента узла «ригель–колонна» железобетонной рамы решена методом сеток. В качестве критерия потери устойчивости внецентренно сжатых элементов железобетонного каркаса многоэтажного здания принят энергетический критерий, записанный через приращение потенциальной энергии деформации от внешнего воздействия.
31 December 2018 in IOP Conference Series: Materials Science and Engineering
The mathematic model of dynamic process into beam, which lies on the elastic foundation Winkler's type, at sudden change of boundary conditions caused by destruction of supporting is presented in the paper. Solution of static bending problem for such beam clamped at two ends is the initial state for dynamic process of it forced oscillations as cantilever rod at destruction of supports limiting edge displacements. The effect, which caused by sudden transformation of computational model of constructively nonlinear system 'beam - foundation' at different combinations of mechanical and geometrical parameters of beam and foundation, is investigated.
28 December 2022 in International Journal for Computational Civil and Structural Engineering
Interest to solving scientific problems related to the evaluation of facilities' resistance and its protection against progressive collapse increases and attracts more and more attention of specialists in the field of structural analysis and design. Therefore, the article presents the results of a computational analysis of dynamic forces in eccentrically compressed reinforced concrete members of structures under accidental impact such as sudden removal of a load bearing member. Using relations for specific deformation energy and integrating it through the cross-section area, the analytical expressions for dynamic strains and curvatures have been obtained for physically and structurally nonlinear RC frame members under eccentric compression. These expressions in some cases allow symbolic solution, for example, in MathCAD software. In contrary, it can be solved with the approximate iterative method. To assess the reliability and effectiveness of the proposed quasi-static method, the analysis of the cast-in-situ reinforced concrete frame resistance to progressive collapse has been performed. The article also provides comparison of the simulation results of the nonlinear quasi-static analysis and the nonlinear dynamic time-history analysis.