A laboratory-scale two-chamber microbial fuel cell employing an aerated cathode with no catalyst was inoculated with mixed inoculum and acetate as the carbon source. Electrochemical impedance spectroscopy (EIS) was used to study the behavior of the MFC during initial biofilm (week 1) and maximum power density (week 20). EIS were performed on the anode chamber, biofilm (without anolyte) and anolyte (without biofilm). Nyquist plots of the EIS data were fitted with two equivalent electrical circuits to estimate the contributions of intrinsic resistances to the overall internal MFC impedance at weeks 1 and 20, respectively. The results showed that the system tended to increase power density from 15 ± 3 (week 1) to 100 ± 15 mW/m2 (week 20) and current density 211 ± 7 (week 1) to 347 ± 29 mA/m2 (week 20). The Samples were identified by pyrosequencing of the 16S rRNA gene and showed that initial inoculum (week 1) was constituted by Proteobacteria (40%), Bacteroidetes (22%) and Firmicutes (18%). At week 20, Proteobacterial species were predominant (60%) for electricity generation in the anode biofilm, being 51% Rhodopseudomonas palustris. Meanwhile on anolyte, Firmicutes phylum was predominant with Bacillus sp. This study proved that under the experimental conditions used there is an important contribution from the interaction of the biofilm and the anolyte on cell performance. Table 1 presents a summary of the specific influence of each element of the system under study. The results showed certain members of the bacterial electrode community increased in relative abundance from the initial inoculum. For example, Proteobacterial species are important for electricity generation in the anode biofilms and Firmicutes phylum was predominant on anolyte to transfer electron. R1 is the same in the three systems and no variation is observed over time. The biofilm makes a significant contribution to the charge transfer processes at the electrode (R2 and Cdl) and, consequently, on the performance of the anode chamber. The biofilm can act as a barrier which reduces diffusion of the anolyte towards the electrode, all the while behaving like a porous material. The anolyte and its interaction with the biofilm exert a considerable influence on diffusion processes, given that it presents the highest values for Rd which increased at week 20. The results showed certain members of the bacterial electrode community increased in relative abundance from the initial inoculum. For example, Proteobacterial species are important for electricity generation in the anode biofilms and Firmicutes phylum was predominant on anolyte to transfer electron. R1 is the same in the three systems and no variation is observed over time. The biofilm makes a significant contribution to the charge transfer processes at the electrode (R2 and Cdl) and, consequently, on the performance of the anode chamber. The biofilm can act as a barrier which reduces diffusion of the anolyte towards the electrode, all the while behaving like a porous material. The anolyte and its interaction with the biofilm exert a considerable influence on diffusion processes, given that it presents the highest values for Rd which increased at week 20.

Marine microalgae are a promising feedstock for biofuel production given their high growth rates and biomass production together with cost reductions due to the use of seawater for culture preparation. However, different microalgae species produce different families of compounds. Some compounds could be used directly as fuels, while others require thermochemical processing to obtain quality biofuels. This work focuses on the characterization of three marine microalgae strains native in Mexico and reported for the first time. Ultrastructure and phylogenetic analysis, suggested that they belong to Nannochloropsis sp. (NSRE-1 and NSRE-2) and Nannochloris sp. (NRRE-1). The composition of their lipid fractions included hydrocarbons, triacylglycerides (TAGs), free fatty acids (FFAs) and terpenes. Based on theoretical estimations from TAG and FFA composition, the potential biodiesels were found to comply with six of the seven estimated properties (ASTM D6751 and EN 14214). On the other hand, hydrocarbons and terpenes synthesized by the strains have outstanding potential as precursors for the production of other renewable fuels, mainly green diesel and bio-jet fuel, which are “drop-in” fuels with quality properties similar to fossil fuels. The validity of this theoretical analysis was demonstrated for the oxygenates of strain NSRE-2, which were experimentally hydrodeoxygenated, obtaining a high-quality renewable diesel as the reaction product.

The constant golden tides of Sargassum spp., identified to be a mixture of Sargassum natans and Sargassum fluitans, observed recently in the Mexican Caribbean have affected the marine ecosystem and the local economy and have created the need for solutions for their management and use. The Sargassum arrivals have thus been considered as third-generation feedstock for biofuel. Their potential for energetic conversion to biomethane was investigated, with hydrolysis as the limiting step due to its complex composition; therefore, in the present study, different physical, chemical, and enzymatic pretreatments and a combination of them have been evaluated, with the additional use of granular activated carbon, to determine the best yield and methane quality. The combined pretreatments of 2.5% hydrogen peroxide, followed by an enzymatic pretreatment (enzymatic extract from Trametes hirsuta isolated from decomposing wood in the Yucatán Peninsula-Mexico), was the best option, reaching a biodegradability of 95% and maximum methane yield of 387 ± 3.09 L CH₄/kg volatile solid. The use of a conductive material, such as granular activated carbon, did not generate significant changes in performance and methane concentration.

Craft breweries release wastewater into the environment, posing serious environmental concerns. Microbial fuel cells (MFCs) are an attractive technology that has been used in industrial wastewater treatment. This study used a scalable system of nine MFCs (stacked) to treat 150 L of craft brewery wastewater (CBW). The CBW had 1831 ± 85 mg COD (chemical oxygen demand) L⁻¹. The hydraulic retention time was 5 days, with a COD removal percentage of 93 ± 1.8%. The total internal resistance of the stack was 204.8 ± 5.2 Ω at 26 ± 2 °C without the use of a metal catalyst; the reduction of oxygen was the limiting process. Finally, the sequence of treatments applied with this proposed system demonstrated its self-sustainability, which could be a viable option for the real-life conditions of this kind of wastewater. Further research is needed.