Carbon sources for biofuel production are wide-ranging and their availability depends on the climate and soil conditions of the land where the production chain is located. Henequen (Agave fourcroydes Lem.) is cultivated in Yucatán, Mexico to produce natural fibers from the leaves, and a juice containing fructans is produced during this process. Fructans can be hydrolyzed to fructose and glucose and metabolized into ethanol by appropriate yeasts. In Mexico, different Agave species provide the carbon source for (distilled and non-distilled) alcoholic beverage production using the stem of the plant, whilst the leaves are discarded. In this work, we investigated the effect of thermal acid and enzymatic hydrolysis of the juice on the amount of reducing sugars released. Growth curves were generated with the yeasts Saccharomyces cerevisiae and Kluyveromyces marxianus and fermentations were then carried out with Kluyveromyces marxianus to determine alcohol yields.

Marine microalgae are a promising feedstock for biofuel production given their high growth rates and biomass production together with cost reductions due to the use of seawater for culture preparation. However, different microalgae species produce different families of compounds. Some compounds could be used directly as fuels, while others require thermochemical processing to obtain quality biofuels. This work focuses on the characterization of three marine microalgae strains native in Mexico and reported for the first time. Ultrastructure and phylogenetic analysis, suggested that they belong to Nannochloropsis sp. (NSRE-1 and NSRE-2) and Nannochloris sp. (NRRE-1). The composition of their lipid fractions included hydrocarbons, triacylglycerides (TAGs), free fatty acids (FFAs) and terpenes. Based on theoretical estimations from TAG and FFA composition, the potential biodiesels were found to comply with six of the seven estimated properties (ASTM D6751 and EN 14214). On the other hand, hydrocarbons and terpenes synthesized by the strains have outstanding potential as precursors for the production of other renewable fuels, mainly green diesel and bio-jet fuel, which are “drop-in” fuels with quality properties similar to fossil fuels. The validity of this theoretical analysis was demonstrated for the oxygenates of strain NSRE-2, which were experimentally hydrodeoxygenated, obtaining a high-quality renewable diesel as the reaction product.

Ramon (Brosimum alicastrum) is a forest tree native to the Mesoamerican region and the Caribbean. The flour obtained from Ramon seeds is 75% carbohydrate, of which 63% is starch, indicating its potential as a novel raw material for bioethanol production. The objective of this study was to produce ethanol from Ramon flour using a 90 °C thermic treatment for 30 min and a native yeast strain (Candida tropicalis) for the fermentation process. In addition, the structure of the flour and the effects of pretreatment were observed via scanning electron microscopy. The native yeast strain was superior to the commercial strain, fermenting 98.8% of the reducing sugar (RS) at 48 h and generating 31% more ethanol than commercial yeast. One ton of flour yielded 213 L of ethanol. These results suggest that Ramon flour is an excellent candidate for ethanol production. This is the first report on bioethanol production using the starch from Ramon seed flour and a native yeast strain isolated from this feedstock. This alternative material for bioethanol production minimizes the competition between food and energy production, a priority for Mexico that has led to significant changes in public policies to enhance the development of renewable energies.

Hydrogen, electric energy production, and metal toxic bioremediation are some of the biotechnological applications of sulfate-reducing organisms, which potentially depend on the sulfide produced. In this study, offshore of Yucatan, the capacity to produce hydrogen sulfide using microbial consortia from marine sediment (SC469, PD102, SD636) in batch reactors was evaluated. Kinetic tests were characterized by lactate oxidation to acetate, propionate, CO₂ and methane. The inoculum SC469, located in open-ocean, differed strongly in microbial diversity and showed better performance in substrate utilization with the highest hydrogen sulfide production (246 mmolg⁻¹ VSS) at a specific hydrogen sulfide rate of 113 mmol g⁻¹ VSS d⁻¹ with a 0.79 molar ratio of sulfate/lactate. Sulfate-reducing microbial consortia enriched in the laboratory from marine sediments collected offshore in Yucatan and with a moderate eutrophication index, differed strongly in microbial diversity with loss of microorganisms with greater capacity for degradation of organic macromolecules. The sulfate-reducing microorganisms were characterized using Illumina MiSeq technology and were mainly Desulfomicrobium, Clostridium and Desulfobacter.

Currently, there is increasing interest and effort directed to developing sustainable processes, including in waste management and energy production and storage, among others. In this research, corn cobs were used as a substrate for the cultivation of Pleurotus djamor, a suitable feedstock for the management of these agricultural residues. Revalorization of this fungus, as an environmentally friendly carbon precursor, was executed by taking advantage of the intrinsic characteristics of the fungus, such as its porosity. Obtaining fungus-derived porous carbons was achieved by hydrothermal activation with KOH and subsequent pyrolysis at 600, 800, and 1000 °C in an argon atmosphere. The morphologies of the fungal biomass and fungus-derived carbons both exhibited, on their surfaces, certain amorphous similarities in their pores, indicating that the porous base matrix of the fungus was maintained despite carbonization. From all fungus-derived carbons, PD1000 exhibited the largest superficial area, with 612 m²g⁻¹ and a pore size between 3 and 4 nm recorded. Electrochemical performance was evaluated in a three-electrode cell, and capacitance was calculated by cyclic voltammetry; a capacitance of 60 F g⁻¹ for PD1000 was recorded. Other results suggested that PD1000 had a fast ion-diffusion transfer rate and high electronic conductivity. Ultimately, Pleurotus djamor biomass is a suitable feedstock for obtaining carbon in a sustainable way, and it features a defined intrinsic structure for potential energy storage applications, such as electrodes in supercapacitors.

Methane production from Brosimum alicastrum seed coat was evaluated using a logistic model through three alkaline concentrations (0.19 M, 0.26 M, and 0.28 M) and three enzymatic activity levels (3000 U mL^-1, 5000 U mL^-1, and 7000 U mL^-1) as pretreatments. Laccase was produced through submerged fermentation using T. hirsuta Bm-2 fungi, while NaOH served as the alkaline agent. Enzymatic pretreatment resulted in the highest specific CH₄ yield (427.43±2.28 mL CH₄/g VS_added), surpassing both alkaline pretreatment (235.61 ± 9.19 mL CH₄/g VS_added) and the control (102.54 ± 5.55 mL CH₄/g VS_added). Kinetic analysis of CH₄ production indicated that cumulative CH₄ production reached its stationary phase within 30 days of digestion. Moreover, enzymatic pretreatment exhibited the highest CH₄ formation rate (0.15–0.17 h^-1), except for the control, which had a slightly higher rate (0.21 h^-1). The kinetic analysis revealed that the enzymatic pretreatment significantly improved the hydrolysis stage of Ramon's seed coat, promoting higher cumulative CH₄ production and leading to an increased specific CH₄ yield.