Kurzfassung: Zur Durchführung einer zustandsabhängigen Instandhaltungsstrategie an Straßenbahnen sind Informationen zum momentanen technischen Zustand von Antriebskomponenten essentiell. Im Rahmen eines aktuell laufenden Kooperationsprojektes wird gezeigt, wie die messtechnische Erfassung von schwingungsdiagnostischen Signalen mithilfe von Sensornetzwerken erfolgen kann. Auf Basis einer komplexen Vorgehensweise für eine automatisierte Entscheidungsfindung werden geeignete Parameter bestimmt und mit scharfen und unscharfen Methoden ausgewertet.
Trams are the most durable and resource efficient forms of public transportation. However, because of the varying wear in dependence on their operation mode and load levels, there is a need for condition monitoring and early maintenance. Vibration sensors provide interesting possibilities to monitor the relevant tram drive components. In this contribution we investigate their use under real conditions. On the basis of cable bound vibration measurements, the influence of the crossed track section, the tram speed and the tram condition is shown. Based on the investigation results, a concept is proposed in which a meshed and wireless sensor network, event-triggered, can acquire vibration measurement data, which are suitable for the diagnosis of tram drive components. The proposed concept has the potential to operate the sensor nodes in an energy efficient way through decentralized data evaluation taking place on the sensor node.
Although condition monitoring is very important for a reliable operation of tram powertrain components, conventional wired sensor systems do not manage to find wide acceptance because of installation and security costs. To address those issues, we propose a novel condition monitoring system based on a wireless and energy self-sufficient sensor network, where the individual sensor nodes harvest energy from vibrations, occurring while the tram is in motion. First, we performed an experimental investigation to identify the most important boundary conditions for the system design. Second, we designed individual sensor nodes using parameters derived from the previous investigation. Finally, the sensor network was deployed and tested on the tram gearboxes. The obtained measurement data were recorded at a sufficient sampling rate of 4.56 kHz and were successfully transferred from the tram gearbox to the network base station within a radius of 10 m inside the tram despite factors such as reflections, fading and electromagnetic compatibility. A piezoelectric vibration harvester is the power supply for the sensor nodes and it delivers up to 21.22 mW for relevant vibration frequency range between 10 Hz and 30 Hz, thus enabling deployment of autonomous sensor nodes.
Wireless sensors enable fast and easy recording of measurement data - also known as plug and play. Currently a very big challenge is providing of a stable long range power supply. The use of energy harvesting provides an opportunity to supply wireless sensors and to improve the stability of the sensor networks. To estimate the lifetime of sensors (in a network) a simulation tool based on MATLAB/Simulink was developed.
Currently in the Leipziger Verkehrsbetriebe (LVB) a tram bearing is replaced only if elaborate inspection finds it faulty. The tram thereby is out of service for several days. To reduce maintenance costs this paper gives a review about investigations how to estimate the wear via wireless and self-sufficient sensors. Moreover, information about the requirements of such sensors are given.
28 May 2019 in Zeitschrift für wirtschaftlichen Fabrikbetrieb
Kurzfassung Straßenbahnen gehören zu den wichtigsten und langlebigsten Transportmitteln im innerstädtischen Nahverkehr. Zunehmend ergeben sich aus den technischen Rahmenbedingungen für deren Betrie... Abstract Trams are one of the most important and long-lasting forms of public transportation. But the technical requirements for the use of trams still give reason for activities with regard to noi...