Behçet Özgür Alaydin

Prof. Dr. Behçet Özgür Alaydin

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 February 2021 in Optics Express
Verified
Journal Article
Open access
PDF file
JHJonas Heidrich
Jonas Heidrich
MGMarco Gaulke
Marco Gaulke
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
MGMatthias Golling
Matthias Golling
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
Semiconductor saturable absorber mirrors (SESAMs) are widely used for modelocking of various ultrafast lasers. The growing interest for SESAM-modelocked lasers in the short-wave infrared and mid-infrared regime requires precise characterization of SESAM parameters. Here, we present two SESAM characterization setups for a wavelength range of 1.9 to 3 µm to precisely measure both nonlinear reflectivity and time-resolved recovery dynamics. For the nonlinear reflectivity measurement, a high accuracy (<0.04%) over a wide fluence range (0.1–1500 µJ/cm2) is achieved. Time-resolved pump-probe measurements have a resolution of about 100 fs and a scan range of up to 680 ps. Using the two setups, we have fully characterized three different GaSb-SESAMs at an operation wavelength of 2.05 µm fabricated in the FIRST lab at ETH Zurich. The results show excellent performance suitable for modelocking diode-pumped solid-state and semiconductor disk lasers. We have measured saturation fluences of around 4 µJ/cm2, modulation depths varying from 1% to 2.4%, low non-saturable losses (∼ 0.2%) and sufficiently fast recovery times (< 32 ps). The predicted influence of Auger recombination in the GaSb material system is also investigated.

9 February 2021 in Optics Express
Verified
Journal Article
Open access
PDF file
ABA. Barh
A. Barh
JHJ. Heidrich
J. Heidrich
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
MGM. Gaulke
M. Gaulke
MGM. Golling
M. Golling
UKU. Keller
U. Keller
Femtosecond lasers with high peak power at wavelengths above 2 µm are of high interest for generating mid-infrared (mid-IR) broadband coherent light for spectroscopic applications. Cr2+-doped ZnS/ZnSe solid-state lasers are uniquely suited since they provide an ultra-broad bandwidth in combination with watt-level average power. To date, the semiconductor saturable absorber mirror (SESAM) mode-locked Cr:ZnS(e) lasers have been severely limited in power due to the lack of suitable 2.4-µm SESAMs. For the first time, we develop novel high-performance 2.4-µm type-I and type-II SESAMs, and thereby obtain state-of-the-art mode-locking performance. The type-I InGaSb/GaSb SESAM demonstrates a low non-saturable loss (0.8%) and an ultrafast recovery time (1.9 ps). By incorporating this SESAM in a 250-MHz Cr:ZnS laser cavity, we demonstrate fundamental mode-locking at 2.37 µm with 0.8 W average power and 79-fs pulse duration. This corresponds to a peak power of 39 kW, which is the highest so far for any saturable absorber mode-locked Cr:ZnS(e) oscillator. In the same laser cavity, we could also generate 120-fs pulses at a record high average power of 1 W. A comparable laser performance is achieved using type-II InAs/GaSb SESAM as well. These results pave the way towards a new class of high-power femtosecond SESAM mode-locked oscillators operating directly above 2-µm wavelength.

1 June 2022 in Optical Materials Express
Verified
Journal Article
Closed access
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
MGMarco Gaulke
Marco Gaulke
JHJonas Heidrich
Jonas Heidrich
MGMatthias Golling
Matthias Golling
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
We present the detailed growth and characterization of novel GaSb-based semiconductor saturable absorber mirrors (SESAMs) operating in the 2–2.4 µm spectral range. These SESAMs at different wavelengths are bandgap engineered using ternary material compositions and without strain compensation. We observe that even when the thickness of quantum wells (QWs) exceeds the critical thickness we obtain strain relaxed SESAMs that do not substantially increase nonsaturable losses. SESAMs have been fabricated using molecular beam epitaxy with a AlAs0.08Sb0.92/GaSb distributed Bragg reflector (DBR) and strained type-I InxGa1-xSb or type-II W-like AlSb/InAs/GaSb QWs in the absorber region. All the type-I SESAMs show excellent performance, which is suitable for modelocking of diode-pumped semiconductor, ion-doped solid-state, and thin-disk lasers. The recovery time of the type-II SESAM is too long which can be interesting for laser applications. The dependence of the SESAM design, based on its QW number, barrier material, and operation wavelength are investigated. A detailed characterization is conducted to draw conclusions from macroscopic nonlinear and transient absorption properties at different wavelengths in the 2–2.4 µm range for the corresponding devices.

2 February 2022 in Optics Express
Verified
Journal Article
Closed access
ABAjanta Barh
Ajanta Barh
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
JHJonas Heidrich
Jonas Heidrich
MGMarco Gaulke
Marco Gaulke
MGMatthias Golling
Matthias Golling
UKUrsula Keller
Ursula Keller
Femtosecond lasers with high repetition rates are attractive for spectroscopic applications with high sampling rates, high power per comb line, and resolvable lines. However, at long wavelengths beyond 2 µm, current laser sources are either limited to low output power or repetition rates below 1 GHz. Here we present an ultrafast laser oscillator operating with high output power at multi-GHz repetition rate. The laser produces transform-limited 155-fs pulses at a repetition rate of 2 GHz, and an average power of 0.8 W, reaching up to 0.7 mW per comb line at the center wavelength of 2.38 µm. We have achieved this milestone via a Cr2+-doped ZnS solid-state laser modelocked with an InGaSb/GaSb SESAM. The laser is stable over several hours of operation. The integrated relative intensity noise is 0.15% rms for [10 Hz, 100 MHz], and the laser becomes shot noise limited (-160 dBc/Hz) at frequencies above 10 MHz. Our timing jitter measurements reveal contributions from pump laser noise and relaxation oscillations, with a timing jitter of 100 fs integrated over [3 kHz, 100 MHz]. These results open up a path towards fast and sensitive spectroscopy directly above 2 µm.

2 March 2022 in IEEE Photonics Technology Letters
Verified
Journal Article
Open access
JHJonas Heidrich
Jonas Heidrich
MGMarco Gaulke
Marco Gaulke
MGMatthias Golling
Matthias Golling
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
We present the first modelocked backside-cooled GaSb VECSEL (Vertical External Cavity Surface Emitting Laser) operating above $2 ~\mu \text{m}$ . Using a two quantum well InGaSb SESAM (SEmiconductor Saturable Absorber Mirror) in a V-shaped cavity arrangement we obtain femtosecond modelocking at a center wavelength of 2061 nm, with pulses as short as 324 fs, an average output power as high as 65 mW at a repetition rate of 3 GHz. An operation in a picosecond regime is further demonstrated with an even higher average output power of up to 260 mW and 4.5-ps pulses. We perform a characterization in both the femto- and picosecond regimes with measurements of the pulse duration, the optical spectrum, and the pulse repetition rate (frequency and time domain analysis) at low and high power. In this context, the influence of intracavity group delay dispersion (GDD) is investigated. We find that GDD has a strong influence on the pulse duration (fs or ps regime) and thus on the performance of our SESAM-modelocked 2- $\mu \text{m}$ GaSb VECSEL.

18 November 2021 in Optics Express
Verified
Journal Article
Closed access
MGMarco Gaulke
Marco Gaulke
JHJonas Heidrich
Jonas Heidrich
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
MGMatthias Golling
Matthias Golling
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
We compare the gain and continuous wave lasing properties of two InGaSb-based vertical external cavity surface emitting lasers (InGaSb VECSEL) with different heat management approaches operating at a center wavelength of around 2 μ m . To date, intracavity heatspreaders have been required for good average output power, which have many trade-offs, especially for passive modelocking. Here we demonstrate a record high average output power of 810 mW without an intracavity heatspreader using a backside-cooled non-resonant VECSEL chip optimized for modelocking. In addition, we introduce and demonstrate an optical characterization for a wavelength range of 1.9 to 3 μ m to precisely measure wavelength-dependent gain saturation and spectral gain. Gain characteristics are measured as a function of wavelength, fluence, pump power and temperature. Small signal gain of more than 5%, small saturation fluences and broad gain bandwidths of more than 90 nm are demonstrated. In comparison to a commercial VECSEL chip with an intracavity heatspreader, we have obtained similar average output power even though our VECSEL chip is designed for antiresonance.