Matthias Golling

Matthias Golling

Auto-generated profile, based on publicly available information

Matthias Golling

Ultrafast Laser Physics Group, Institute for Quantum Electronics, ETH Zrich, Zrich, Switzerland

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 October 2021 in Optics Express
Verified
Journal Article
Closed access
JPJustinas Pupeikis
Justinas Pupeikis
BWBenjamin Willenberg
Benjamin Willenberg
FBFrancois Bruno
Francois Bruno
MHMike Hettich
Mike Hettich
ANAlexander Nussbaum-Lapping
Alexander Nussbaum-Lapping
UKUrsula Keller
Ursula Keller
We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements. The ultrasonic signatures in a semiconductor multi-quantum-well structure originating from the quantum wells and superlattice regions are revealed and discussed. We further demonstrate ultrasonic measurements on a thin-film metalized sample and compare these measurements to ones obtained with a pair of locked femtosecond lasers. Our data show that a free-running dual-comb laser is well-suited for picosecond ultrasonic measurements and thus it offers a significant reduction in complexity and cost for this widely adopted non-destructive testing technique.

1 June 2022 in Optical Materials Express
Verified
Journal Article
Closed access
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
MGMarco Gaulke
Marco Gaulke
JHJonas Heidrich
Jonas Heidrich
MGMatthias Golling
Matthias Golling
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
We present the detailed growth and characterization of novel GaSb-based semiconductor saturable absorber mirrors (SESAMs) operating in the 2–2.4 µm spectral range. These SESAMs at different wavelengths are bandgap engineered using ternary material compositions and without strain compensation. We observe that even when the thickness of quantum wells (QWs) exceeds the critical thickness we obtain strain relaxed SESAMs that do not substantially increase nonsaturable losses. SESAMs have been fabricated using molecular beam epitaxy with a AlAs0.08Sb0.92/GaSb distributed Bragg reflector (DBR) and strained type-I InxGa1-xSb or type-II W-like AlSb/InAs/GaSb QWs in the absorber region. All the type-I SESAMs show excellent performance, which is suitable for modelocking of diode-pumped semiconductor, ion-doped solid-state, and thin-disk lasers. The recovery time of the type-II SESAM is too long which can be interesting for laser applications. The dependence of the SESAM design, based on its QW number, barrier material, and operation wavelength are investigated. A detailed characterization is conducted to draw conclusions from macroscopic nonlinear and transient absorption properties at different wavelengths in the 2–2.4 µm range for the corresponding devices.

2 February 2022 in Optics Express
Verified
Journal Article
Closed access
ABAjanta Barh
Ajanta Barh
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
JHJonas Heidrich
Jonas Heidrich
MGMarco Gaulke
Marco Gaulke
MGMatthias Golling
Matthias Golling
UKUrsula Keller
Ursula Keller
Femtosecond lasers with high repetition rates are attractive for spectroscopic applications with high sampling rates, high power per comb line, and resolvable lines. However, at long wavelengths beyond 2 µm, current laser sources are either limited to low output power or repetition rates below 1 GHz. Here we present an ultrafast laser oscillator operating with high output power at multi-GHz repetition rate. The laser produces transform-limited 155-fs pulses at a repetition rate of 2 GHz, and an average power of 0.8 W, reaching up to 0.7 mW per comb line at the center wavelength of 2.38 µm. We have achieved this milestone via a Cr2+-doped ZnS solid-state laser modelocked with an InGaSb/GaSb SESAM. The laser is stable over several hours of operation. The integrated relative intensity noise is 0.15% rms for [10 Hz, 100 MHz], and the laser becomes shot noise limited (-160 dBc/Hz) at frequencies above 10 MHz. Our timing jitter measurements reveal contributions from pump laser noise and relaxation oscillations, with a timing jitter of 100 fs integrated over [3 kHz, 100 MHz]. These results open up a path towards fast and sensitive spectroscopy directly above 2 µm.

2 March 2022 in IEEE Photonics Technology Letters
Verified
Journal Article
Open access
JHJonas Heidrich
Jonas Heidrich
MGMarco Gaulke
Marco Gaulke
MGMatthias Golling
Matthias Golling
BABehçet Özgür Alaydin
Behçet Özgür Alaydin
ABAjanta Barh
Ajanta Barh
UKUrsula Keller
Ursula Keller
We present the first modelocked backside-cooled GaSb VECSEL (Vertical External Cavity Surface Emitting Laser) operating above $2 ~\mu \text{m}$ . Using a two quantum well InGaSb SESAM (SEmiconductor Saturable Absorber Mirror) in a V-shaped cavity arrangement we obtain femtosecond modelocking at a center wavelength of 2061 nm, with pulses as short as 324 fs, an average output power as high as 65 mW at a repetition rate of 3 GHz. An operation in a picosecond regime is further demonstrated with an even higher average output power of up to 260 mW and 4.5-ps pulses. We perform a characterization in both the femto- and picosecond regimes with measurements of the pulse duration, the optical spectrum, and the pulse repetition rate (frequency and time domain analysis) at low and high power. In this context, the influence of intracavity group delay dispersion (GDD) is investigated. We find that GDD has a strong influence on the pulse duration (fs or ps regime) and thus on the performance of our SESAM-modelocked 2- $\mu \text{m}$ GaSb VECSEL.

14 July 2022 in Optics Express
Verified
Journal Article
Closed access
STSergei Tomilov
Sergei Tomilov
YWYicheng Wang
Yicheng Wang
MHMartin Hoffmann
Martin Hoffmann
JHJonas Heidrich
Jonas Heidrich
MGMatthias Golling
Matthias Golling
CSClara Saraceno
Clara Saraceno
Ultrafast laser systems operating with high-average power in the wavelength range from 1.9 µm to 3 µm are of interest for a wide range of applications for example in spectroscopy, material processing and as drivers for secondary sources in the XUV spectral region. In this area, laser systems based on holmium-doped gain materials directly emitting at 2.1 µm have made significant progress over the past years, however so far only very few results were demonstrated in power-scalable high-power laser geometries. In particular, the thin-disk geometry is promising for directly modelocked oscillators with high average power levels that are comparable to amplifier systems at MHz repetition rate. In this paper, we demonstrate semiconductor saturable absorber mirror (SESAM) modelocked Ho:YAG thin-disk lasers (TDLs) emitting at 2.1-µm wavelength with record-holding performance levels. In our highest average power configuration, we reach 50 W of average power, with 1.13-ps pulses, 2.11 µJ of pulse energy and ∼1.9 MW of peak power. To the best of our knowledge, this represents the highest average power, as well as the highest output pulse energy so far demonstrated from a modelocked laser in the 2-µm wavelength region. This record performance level was enabled by the recent development of high-power GaSb-based SESAMs with low loss, adapted for high intracavity power and pulse energy. We also explore the limitations in terms of reaching shorter pulse durations at high power with this gain material in the disk geometry and using SESAM modelocking, and present first steps in this direction, with the demonstration of 30 W of output power, with 692-fs pulses in another laser configuration. In the near future, with the development of a next generation of SESAM samples for this wavelength region, we believe higher pulse energy approaching the 10-µJ regime, and sub-500-fs pulses should be straightforward to reach using SESAM modelocking.

4 January 2001 in Electronics Letters
Verified
Journal Article
Closed access
TKT. KnödL
T. KnödL
MGM. Golling
M. Golling
ASA. Straub
A. Straub
KEK.J. Ebeling
K.J. Ebeling
The room temperature, continuous-wave (CW) operation of a fabricated multi-diode cascade vertical-cavity surface-emitting laser at 980 nm wavelength, with a differential quantum efficiency exceeding unity, is demonstrated for the first time. A maximum wallplug efficiency of 16% is obtained at a driving current of three times the threshold.