With the recent development of wireless technologies, a massive number of Internet of Things (IoT) devices will access the Beyond 5G (B5G) networks for various advanced applications. How to support this huge amount of wireless data traffic over limited spectrum resource is a critical problem. To address this problem, dynamic spectrum sharing has been extensively investigated recently to improve the spectrum utilization efficiency for sub-6GHz frequency bands. The secondary users are allowed to access the spatio-temporal spectrum holes of the primary users with the help of a spectrum database. In this paper, we propose a green spectrum sharing framework in B5G era by exploiting crowdsensing. The goal is to construct an accurate crowdsourced spectrum database in a cost-efficient way. Specifically, a machine learning based classifier is used to select the spots that need to be interpolated by crowdsensing users, and both offline and online user incentive mechanisms are proposed to attract users to participate into the crowdsensing task. To validate the proposed framework, we conduct a vehicle-based measurement campaign over a 2km $\times $ 7km area, and evaluate the performance of the proposed framework by using the collected real data.
Millimeter-wave FMCW (Frequency Modulated Continuous Wave) radar is expected to be widely used for ADAS (Advanced Driver Assistance System) and automatic driving car. Dense deployment of FMCW radars causes serious inter-radar interference resulting in miss-detection and/or false detection of the targets. As there are various interference environments, adaptive inter-radar interference detection and suppression is required. This paper proposes an adaptive interference detection and suppression scheme based on iterative processing for automotive FMCW radars. The proposed scheme detects the wide band interference using adaptive interference detection threshold control and suppresses it using adaptive interference suppression windowing width control in order to improve SNR (Signal to Noise power Ratio). Computer simulation is conducted to validate the proposed scheme and the results confirm the proposed scheme can improve SNR in various interference environments.
The communication infrastructure is most likely to be damaged after a major disaster occurred, which would lead to further chaos in the disaster stricken area. Modern rescue activities heavily rely on the wireless communications, such as safety status report, disrupted area monitoring, evacuation instruction, rescue coordination, etc. Large amount of data generated from victims, sensors and responders must be delivered and processed in a fast and reliable way, even when the normal communication infrastructure is degraded or destroyed. To this end, reconstructing the post-disaster network by deploying MDRU (Movable and Deployable Resource Unit) and relay unit at edge is a very promising solution. However, the optimal wireless access control in this heterogeneous hastily formed network is extremely challenging, due to the frequent varying environment and the lack of statistics information in advance in post-disaster scenarios. In this paper, we propose a learning based wireless access control approach for edge-aided disaster response network. More specifically, we model the wireless access control procedure as a discrete-time single agent Markov decision process, and solve the problem by exploiting deep reinforcement learning technique. By extensive simulation results, we show that the proposed mechanism significantly outperforms the baseline schemes in terms of delay and packet drop rate.
This paper presents a UHF RFID-based vibration frequency sensitive tag using tilt/vibration switches and a proposed new measurement metric, the number of reads per second. The tilt/vibration sensors comprise an internal metal ball and two electrodes; the metal ball changes the short circuited and open circuited status of the two electrodes. The effectiveness of the proposed measurement metric was confirmed by experimental results that showed the metric is sensitive to vibration frequency. Furthermore, the operational mechanism of the proposed vibration frequency sensitive RFID tag was demonstrated using a transparent plastic cylinder and colored plastic balls. This demonstration simulates metal ball movement in the tilt/vibration sensors and confirms the relationship between the vibration parameters (frequencies and amplitudes) and the proposed metric.
We propose a framework to determine a secure distance between a drone with an ultrahigh-frequency band radio frequency identification (UHF band RFID) reader and metallic objects affixed with RFID tags. The secure distance avoids order changes in received signal strength indicator (RSSI) values among the identified RFID tags in the field of view of the RFID reader. This distance enables a drone operator to securely operate the drone while identifying the RFID tag on the front of an object based on the measurements of RSSI values. An RFID tag located on the front of an object provides the maximum RSSI value. However, multipath propagation alters the RSSI values. Therefore, a framework is needed to determine a secure distance considering the multipath effects. Although inventory management systems based on drones and RFID systems have been proposed to date, this paper establishes a framework to determine the secure distance. In the proposed framework, RFID tag and reader radiation patterns and multipath propagation effects were considered. The proposed framework was evaluated theoretically and experimentally. To evaluate and demonstrate the secure distance, we measured the RSSI values of two RFID tags attached to a metallic balcony. The height from the ground and spacing of the two RFID tags were 1.5 m and 1.3 m, respectively. In this environment, the secure distance was 3.8 m. The experimentally obtained distance that avoids order changes in RSSI values corresponded well with that obtained by this framework. The proposed secure distance is crucial when either drones or robots are introduced to inventory management systems.
Internet of Things (IoT) devices are forecasted to increase to 20 billion by the year 2020. Questions are arising as where the bandwidth and radio channels come from to make it all work. It is a common belief that the spectrum under 6GHz is easy to use for various IoT applications. However, currently it has been almost fully allocated to different kinds of systems, some of which suffer from an extremely low spectrum utilization ratio. To this end, spectrum sharing approach has been proposed recently, which dynamically redistributes the incumbents’ underutilized spectrum to secondary users and exchanges for profit. To incentivize the incumbent to share the spectrum in efficient and profitable ways, auction based mechanisms are extensively discussed. Most of the existing researches propose to share the spectrum by utilizing truthful auction mechanism, in which the secondary users’ dominant strategies are to bid their true valuations. However in reality, exposing true valuation is very risky and thus keeping user’s bidding value confidential is of great importance. In this paper, we propose an efficient privacy preserving spectrum sharing framework for IoT by utilizing ElGamal cyptosystem. The proposed scheme hides the user’s bid from both the auctioneer and other users. By extensive evaluation results, we show that the proposed framework could achieve good spectrum utilization efficiency and user satisfactory ratio, at the cost of acceptable communication and computation overheads.