4 May 2020 in IEEE Sensors Journal
This paper presents a UHF RFID-based vibration frequency sensitive tag using tilt/vibration switches and a proposed new measurement metric, the number of reads per second. The tilt/vibration sensors comprise an internal metal ball and two electrodes; the metal ball changes the short circuited and open circuited status of the two electrodes. The effectiveness of the proposed measurement metric was confirmed by experimental results that showed the metric is sensitive to vibration frequency. Furthermore, the operational mechanism of the proposed vibration frequency sensitive RFID tag was demonstrated using a transparent plastic cylinder and colored plastic balls. This demonstration simulates metal ball movement in the tilt/vibration sensors and confirms the relationship between the vibration parameters (frequencies and amplitudes) and the proposed metric.
18 September 2020 in IEEE Access
We propose a framework to determine a secure distance between a drone with an ultrahigh-frequency band radio frequency identification (UHF band RFID) reader and metallic objects affixed with RFID tags. The secure distance avoids order changes in received signal strength indicator (RSSI) values among the identified RFID tags in the field of view of the RFID reader. This distance enables a drone operator to securely operate the drone while identifying the RFID tag on the front of an object based on the measurements of RSSI values. An RFID tag located on the front of an object provides the maximum RSSI value. However, multipath propagation alters the RSSI values. Therefore, a framework is needed to determine a secure distance considering the multipath effects. Although inventory management systems based on drones and RFID systems have been proposed to date, this paper establishes a framework to determine the secure distance. In the proposed framework, RFID tag and reader radiation patterns and multipath propagation effects were considered. The proposed framework was evaluated theoretically and experimentally. To evaluate and demonstrate the secure distance, we measured the RSSI values of two RFID tags attached to a metallic balcony. The height from the ground and spacing of the two RFID tags were 1.5 m and 1.3 m, respectively. In this environment, the secure distance was 3.8 m. The experimentally obtained distance that avoids order changes in RSSI values corresponded well with that obtained by this framework. The proposed secure distance is crucial when either drones or robots are introduced to inventory management systems.
10 July 2020 in International Journal of Interactive Mobile Technologies (iJIM)
In this research, we discuss the implementation of multi-hop communication in sending data regarding the temperature, humidity and the water quality of Maninjau Lake area by utilizing wireless sensor network (WSN) technology. Maninjau lake has seen a growth in fish farming in recent years, which has caused water pollution and high rates of fish mortality. The performance of the sensor node or the end device node in sending data to the coordinator needs to be maximized, so that the information is well received by the user. The result of the performance is not only related to the equipment’s used, but also to the network topology and the communication model. In this study, we use multi-hop data communication technique using Zigbee S2 wireless module standard IEEE 802.15.4 and a router node on a mesh topology network. Data is received in real time by the coordinator and can be monitored via a mobile device connected to the internet using IoT (ESP 8266) module. The result of the simulation shows that each end device sends the data of temperature, humidity and the PH of water of Maninjau Lake to the router nodes and forwards them to the coordinator. Information can be accessed by the user through a mobile phone application. There are many potential applications for this research in monitoring water quality, preventing pollution and reducing aquaculture mortality.
29 September 2018 in JITCE (Journal of Information Technology and Computer Engineering)
Landslide is one of the most frequent disasters in Indonesia, especially in hilly areas, valleys, and volcanoes. Geographical conditions that are generally mountainous areas and have slopes make the soil unstable. As a result, when the movement of the land becomes easy to slide. Ground shifts and excessive water content are the main causes of landslides. The landslide disaster can cause many losses, such as to cause loss of life, can disrupt transportation facilities, damage agricultural land, and various other consequences. In this study used sensor MPU6050 and Soil Moisture and NodeMcu sensors to provide early warning of landslides. Linear acceleration is detected by using MPU6050 sensor and will define the ground movement based on the scenarios developed in this study. Soil moisture sensor detects soil moisture. The result of soil movement detection and soil moisture is stored in file storage. When ground detection and soil moisture is greater than 51%, the alarm alert is sent to the user's smartphone with a 100% success percentage.
25 December 2019 in IEEE Journal of Radio Frequency Identification
This paper proposes a radio frequency identification (RFID) tag that can change its color using a piece of a paper towel that has absorbed a solution made from salt and an anthocyanin solution extracted from purple cabbage leaves boiled in water. The proposed RFID tag employs a specific RFID tag integrated circuit (IC) that has energy harvesting and switched ground functions, which enable it to generate direct current (DC) voltages to operate electronic devices and to change a ground terminal connection from a short circuited to an open circuited state, and vice versa. The obtained DC voltages are applied to the paper towel, changing its color from purple to green. The validity of the proposed method was demonstrated experimentally, confirming that the changed colors were preserved after drying. We have succeeded in changing the color of the specified RFID tag at a 75 cm distance using an RFID reader radiating 250 mW radio waves. Furthermore, a laminated paper towel using transparent sheets with electrodes made of two sheets of aluminum foil is presented, changing the color of the paper towel.