Uneven distribution and delayed system response of dissolved oxygen (DO) in dual−tank recirculating bioreactor systems pose significant challenges for oxygen supply. To address these issues, a dynamic parameterized predictive control (DPPC) approach is proposed and validated through simulation and bench−scale experiments. This method is underpinned by a mathematical model that integrates mass transfer kinetics and chemical thermodynamic principles, accurately capturing oxygen dissolution and transfer within a recirculating environment. By predicting future DO variations and continuously integrating real−time monitoring data, the controller adjusts oxygen injection parameters in real time, rapidly restoring DO levels to target values while minimizing overshoot and latency introduced by system circulation. Experimental results in dual−tank setups show an RMSE below 0.05 and an R2 exceeding 0.99, affirming the model’s predictive accuracy under varying oxygen conditions. Compared with conventional feedback control strategies, the proposed method demonstrates improved stability, faster response, and lower overshoot, achieving a 47.8% reduction in ISE and a 41.4% reduction in IAE, thus highlighting its superior tracking accuracy. These findings suggest the DPPC method holds promise as a control framework for future application in oxygen−sensitive culture systems.
28 November 2023 in IEEE Transactions on Instrumentation and Measurement
To produce a standard ultralow frequency (ULF) vibration waveform for calibration with an electromagnetic vibrator (EMV) is challenging because of its tiny electromagnetic driving force and low signal-to-noise ratio (SNR). This article presents a model-free compensation method for the micro disturbance of the EMV, which mainly originates from nonlinear forces generated by the bending or tensioning of pipes and wires. The influence of micro disturbance on the system is analyzed to extract the disturbance current without estimating the equivalent model and compensated in the input; thus, the force sensorless and model-free compensation of micro disturbance is realized in real-time. Experimental results in the frequency range of 0.001–1 Hz indicate that the proposed method reduces the displacement tracking error by 10.14% and the total harmonic distortion (THD) by 19.44% relative to the model-based compensation method. The proposed method effectively reduces the THD of the ULF vibration waveform with a low computational burden. It can be widely used for ULF vibration generation in engineering applications.
Maintaining stable dissolved oxygen (DO) and pH conditions is critical for reliable operation of bioreactor systems used in cell culture and bioprocess manufacturing. However, accurate regulation of DO and pH remains challenging due to nonlinear process dynamics and variations in operating conditions. In particular, temperature fluctuations can affect gas solubility, gas–liquid mass transfer, and CO2 buffering equilibrium, resulting in deviations in DO and pH. Existing control methods often rely on predefined mechanistic models or reactor-specific parameter identification, which may limit adaptability under changing operating conditions. This paper proposes a disturbance-compensated data-driven adaptive predictive control framework for DO and pH stabilization in bioreactor systems under dynamic temperature disturbances. Based on dynamic linearization, the proposed framework establishes an online input–output representation using measured gas composition, temperature disturbance, and environmental responses. An adaptive gain adjustment mechanism and pseudo-partial-derivative estimation method are developed to update the control relationship online without requiring an explicit process model or iterative optimization. Furthermore, temperature variations are incorporated as measurable disturbances to achieve real-time compensation of their effects on DO and pH dynamics. The proposed framework was evaluated through simulations and experiments using a 3 L bioreactor platform. Compared with a PID controller with temperature feedforward and conventional model-free adaptive predictive control, the proposed method reduced DO and pH tracking errors and improved recovery performance under temperature disturbances. The results demonstrate that the proposed data-driven adaptive predictive control strategy provides an effective approach for DO and pH stabilization in bioreactor systems under temperature-varying conditions.