Mehmet Mustafa Önal

Prof. Dr. Mehmet Mustafa Önal


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2014 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
MÖMehmet Mustafa Önal
Mehmet Mustafa Önal
Concrete beams were strengthened by wrapping the shear edges of the beams twice at 45° in opposite directions by either carbon fiber reinforced polymer (CFRP) or glass fiber reinforced polymer (GFRP). The study included 3 CFRP wrapped beams, 3 GFRP wrapped beams, and 3 control beams, all of which were 150×250×2200 mm and manufactured with C20 concrete and S420a structural steel at the Gazi University Technical Education Faculty labs, Turkey. Samples in molds were cured by watering in the open air for 21 days. Four-point bending tests were made on the beam test specimens and the data were collected. Data were evaluated in terms of load displacement, bearing strength, ductility, and energy consumption. In the CFRP and GFRP reinforced beams, compared to controls, 38% and 42%, respectively, strength increase was observed. In all beams, failure-flexural stress occurred in the center as expected. Most cracking was observed in the flexural region 4. A comparison of CFRP and GFRP materials reveals that GFRP enforced parts absorb more energy. Both materials yielded successful results. Thicker epoxy application in both CFRP and GFRP beams was considered to be effective in preventing break-ups.

1 November 2014 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
MÖMehmet Mustafa Önal
Mehmet Mustafa Önal
BZBaşak Zengin
Başak Zengin
AKAli Koçak
Ali Koçak
BDBilge Doran
Bilge Doran
In in many earthquake-prone regions and countries including Mediterranean area, India, the Middle East, Southeast Asia, existing buildings with its structural elements such as Reinforced Concrete (RC) beams and columns, which show little ductility, have consistently exhibited poor performance during past earthquakes and consequently unavoidable earthquake damages on these structures led to a significant loss of world cultural heritage. Therefore, appropriate strengthening techniques have to be implemented in order to improve load carrying capacities and overall ductility. This paper summarizes experimental investigations of damaged and undamaged RC beams. In this context, twenty-seven beams were tested under combined bending and shear. Eighteen RC beams were damaged and then strengthened with four different methods while nine were kept undamaged. The behavior of damaged and undamaged RC beams is discussed with emphasis on the load deflection and strain characteristics. The results indicate that the specimens strengthened with full jacketing had slightly higher load carrying capacity than the reference beams strengthened with other techniques. The experimental results can also be used for understanding the most convenient strengthened technique for damaged beams.

23 August 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BÖBilal Özaslan
Bilal Özaslan
MÖMehmet Mustafa Önal
Mehmet Mustafa Önal
This study presents the first evaluation of the degree of nonlinearity in site response at strong-motion stations in Türkiye during the 6 February 2023 Kahramanmaraş earthquake sequence (Mw 7.8 and Mw 7.5) using earthquake horizontal-to-vertical spectral ratios (eHVSRs). The analysis uses 2050 weak-motion and 175 strong-motion records from 24 AFAD stations in the Kahramanmaraş and Hatay regions, where some of the strongest ground motions and most severe damage were observed. The selected stations cover a broad range of site conditions, from soft alluvial deposits to relatively stiff sites, as characterized by Vs30. Conventional assessments of nonlinear site response generally rely on peak ground-motion measures and one-dimensional site proxies, particularly Vs30. In contrast, this study evaluates nonlinear behavior within a record-based framework that accounts for the combined influence of source characteristics, propagation path, local site conditions, and basin-related wave effects. Nonlinear site response is quantified by comparing strong-motion and weak-motion eHVSR spectra, where the weak-motion reference is derived from records with peak ground velocity (PGV) lower than 1 cm/s. A principal methodological contribution is the use of record-specific S-wave windows selected according to the event-dependent energy content of each record, rather than a uniform fixed-duration window. This energy-based procedure focuses on the dominant S-wave energy while reducing pre-event noise and late-arriving coda effects. Incorporating record-specific S-wave duration improves degree of nonlinearity (DNL) estimates, proving that nonlinear response is driven not just by peak amplitude and near-surface stiffness but also by duration-dependent cyclic deformation demand. The proposed framework provides record-based constraints for empirical ground-motion models and regional three-dimensional physics-based earthquake simulations.

31 December 2023 in Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi
Verified
Journal Article
Open access
PDF file
TZTamara Zayed
Tamara Zayed
MÖMehmet Mustafa Önal
Mehmet Mustafa Önal
In this study, it is aimed to investigate the usability of waste marble dust from Kırşehir region in the production of environmentally friendly bricks. In line with this goal, it is aimed to produce environmentally friendly bricks with superior physical and mechanical properties compared to normal bricks by using waste marble dust. Within the scope of the study, blended brick was produced by substituting waste marble dust extracted from Kırşehir region at the rates of 10%, 20%, 30%, 40% and 50%. The water-saturated unit weight, porosity, water absorption (by weight), freeze-thaw effect, sulfate effect, compressive strength and bending tensile strength tests were performed on the produced samples. As a result, with the increase in the amount of waste marble dust, a decrease was observed in the saturated unit volume weight, while the values of porosity, water absorption (by weight), freeze-thaw effect and sulfate effect increased. In the mechanical tests, it was determined that while the compressive strength decreased, the tensile strength value increased in bending. In addition, it was concluded that appropriate amounts (10%) of waste marble dust substitute can improve brick properties.

11 September 2026 in Buildings
Verified
Journal Article
Open access
PDF file
MÖMehmet Mustafa Önal
Mehmet Mustafa Önal
BÖBilal Özaslan
Bilal Özaslan
A jet grout design beneath raft foundations requires simultaneous selection of column geometry while satisfying bearing resistance and settlement criteria. This study develops a physics-generated artificial neural network (ANN) surrogate for performance-based screening of discrete jet grout configurations in soft to medium clays. Six engineering variables—undrained shear strength, constrained modulus, raft pressure, column diameter, spacing, and length—were used to generate 12,000 analytical cases representing 400 geometries. Equivalent ultimate column-grid pressure and settlement were calculated using established resistance formulations and an equal strain composite settlement model, respectively. Complete geometry groups were separated into training, validation, and independent test subsets to prevent information leakage, and a compact 6–24–12–2 ANN was trained to predict both responses simultaneously. For 2400 independent test cases representing 80 previously unseen geometries, the ANN achieved R2 values exceeding 0.95 for both outputs and identified the same minimum-intensity feasible configuration as the analytical procedure in the illustrative design application. Independent three-dimensional finite-element simulations provided a complementary numerical assessment of representative settlement responses. The proposed framework integrates source-traceable analytical formulations, multi-output surrogate prediction, and performance constraints into a transparent preliminary design methodology for rapid screening of jet grout configurations. More broadly, it demonstrates how physics-generated machine learning surrogates can support the transition towards data-driven geotechnical design by systematically linking multidimensional engineering inputs with performance-based design decisions.