Pengfei Xiao

Dr. Pengfei Xiao


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2020 in IEEE Access
Verified
Journal Article
Open access
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
JMJijun Meng
Jijun Meng
FCFeifei Chen
Feifei Chen
This paper studies the calibration of industrial robots. Aiming at the problems of cumbersome industrial robot modeling and poor calibration effects, this paper proposes a new calibration method for determining the DH frame and DH parameters of industrial robots by measuring first and modeling afterwards. Firstly, the theory of Fixed Axis-Invariant is proposed, the Axis-Invariant is determined based on dual-vectors, and the origin of Fixed Axis-Invariant is determined by intersection obtained through the projection from one measuring point to the Axis-Invariant. Secondly, a method for solving the D-H frame and D-H parameters of industrial robots based on Fixed Axis-Invariant is proposed. Then, combined with laser tracker and industrial robot control software for secondary development, the developed software can be used to automatically measure and obtain the D-H frame and D-H parameters of industrial robot. Finally, compared with other calibration methods, it can be seen that the calibration method based on Fixed Axis-Invariant proposed in this paper can obtain better results. It can improve the absolute positioning accuracy of industrial robots to less than 0.28 mm, which can solve the problems of cumbersome industrial robot modeling and poor calibration effects.

3 March 2020 in IEEE Access
Verified
Journal Article
Open access
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
HXHao Xu
Hao Xu
CLChenxin Lu
Chenxin Lu
This paper investigates the on-orbit maintenance task planning of large-scale space solar power station. The research is of great significance for the normal operation of large-scale space equipment. Space robots are very maneuverable, which makes space maintenance possible. A new task planning algorithm is proposed for the on-orbit maintenance of space robots. Firstly, based on the discretization method, the modified clustering method is used to cluster the maintenance area of large-scale space solar power stations. Secondly, the hierarchical structure principle is used to assign tasks to the space robot, the inner layer plans the shortest path within the cluster set, and the outer layer plans the optimal path between the cluster sets. Finally, based on the optimal path of the outer layer of the maintenance task, a hybrid optimization algorithm based on tabu algorithm and modified ant colony algorithm is proposed. The algorithm can meet the space machine task allocation requirements and analyze the maintenance path under certain energy conditions. The simulation results show that the proposed algorithm can effectively solve the optimal problem of space robot mission planning under resource constraints.

21 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
FCFeifei Chen
Feifei Chen
This study studies the problem of on-orbit maintenance task planning for space-robot clusters. Aiming at the problem of low maintenance efficiency of space-robot cluster task-planning, this study proposes a cluster-task-planning method based on energy and path optimization. First, by introducing the penalty-function method, the task planning problem of the space-robot cluster under limited energy is analyzed, and the optimal-path model for task planning with comprehensive optimization of revenue and energy consumption are constructed; then, the maintenance task points are clustered to reduce the scale of the problem, thus reducing the difficulty of solving the problem; finally, a modified differential evolution algorithm is proposed to solve the problem of space-robot cluster task-planning, improve the performance of space-robot cluster task-assignment and path planning. Simulation results show that the proposed optimal-path model of space-robot cluster and the modified differential evolution algorithm can effectively solve the task-planning problem of spatial robot clusters.

20 July 2020 in IEEE Access
Verified
Journal Article
Open access
QLQidong Li
Qidong Li
HJHehua Ju
Hehua Ju
PXPengfei Xiao
Pengfei Xiao
FCFeifei Chen
Feifei Chen
FLFei Lin
Fei Lin
This paper studies the optimal trajectory optimization of a space robot for maintenance operations. A new trajectory planning algorithm is proposed to solve the problems of low maintenance efficiency and poor stationarity of space robots on-orbit. Firstly, considering the constraint conditions such as the speed, acceleration and secondary acceleration of each joint of the space robots, the cubic spline curve is used to plan the trajectory of the space robots in the joint space. Then, a comprehensive optimal planning model for time-jerk is established, and the optimal problem of space maintenance efficiency and stationarity is described as a nonlinear constrained optimization problem. Finally, a hybrid optimization algorithm is proposed to solve the trajectory optimization problem of space robots by combining genetic algorithm and particle swarm optimization method. The simulation results show that, compared with several classic optimization algorithms, the proposed hybrid optimization algorithm can obtain a better maintenance trajectory of the space robots under the constraints, which solves the low efficiency and poor stability of the space robots on-orbit maintenance problem.

1 September 2021 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
This paper studies the Cartesian point-to-point optimal trajectory planning for space robots oriented to space maintenance operations. Aiming at the problems of poor stability, large base disturbance, and large joint variation in the motion planning of point-to-point maintenance in space, a planning method is proposed to minimize the base disturbance and the total joint angle variation under the jerk constraint on the premise of ensuring the accuracy of the end pose. First, the attitude of the space robot is described by the unit quaternion, and the velocity relationship between the joint angle, the end effector, and the base posture is introduced. Then, the joint trajectories were parameterized by a fifth degree polynomial, and a trajectory planning model with the minimum perturbation of the base and the minimum variation of the joint of the manipulator was established under the condition that the end effector satisfied the pose and the jerk constraint. Finally, a multi-objective optimization algorithm is proposed to deal with the trajectory optimization problem under nonlinear constraints. The simulation results show that the proposed trajectory planning method can optimize the base attitude and joint angle of the space manipulator under the premise of the optimal trajectory and stability of the terminal execution tool, which ensures the stability of the space robot’s on-orbit service and reduces the energy consumption.

1 August 2024 in Mathematics
Verified
Journal Article
Open access
PDF file
PXPengfei Xiao
Pengfei Xiao
CZChunping Zhou
Chunping Zhou
YQYongxin Qu
Yongxin Qu
YLYunfeng Luo
Yunfeng Luo
Quhao LiQuhao Li
Quhao Li
Porous hierarchical structures are extensively utilized in engineering for their high specific strength, enhanced corrosion resistance, and multifunctionality. Over the past two decades, multiscale topology optimization for these structures has garnered significant attention. This paper introduces a novel hybrid MMCs (Moving Morphable Components)–density topology optimization method for quasi-periodic cellular structures. The term ‘quasi-periodic’ refers to microstructures whose different macroscopic points exhibit similar topologies with varying parameters. The primary concept involves using the MMC method to describe microstructural topology, while employing variable density to depict macro layouts. This approach leverages the advantage of MMCs in explicitly describing structural topology alongside the variable density of arbitrary microstructures. Sensitivity analyses of the optimization functions concerning design variables are shown, and a gradient optimization solver is employed to solve the optimization model. The examples effectively show the efficacy of the proposed method, illustrating that quasi-periodic cellular structures outperform single-scale solid structures.