Hehua Ju

Prof. Dr. Hehua Ju


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2020 in IEEE Access
Verified
Journal Article
Open access
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
JMJijun Meng
Jijun Meng
FCFeifei Chen
Feifei Chen
This paper studies the calibration of industrial robots. Aiming at the problems of cumbersome industrial robot modeling and poor calibration effects, this paper proposes a new calibration method for determining the DH frame and DH parameters of industrial robots by measuring first and modeling afterwards. Firstly, the theory of Fixed Axis-Invariant is proposed, the Axis-Invariant is determined based on dual-vectors, and the origin of Fixed Axis-Invariant is determined by intersection obtained through the projection from one measuring point to the Axis-Invariant. Secondly, a method for solving the D-H frame and D-H parameters of industrial robots based on Fixed Axis-Invariant is proposed. Then, combined with laser tracker and industrial robot control software for secondary development, the developed software can be used to automatically measure and obtain the D-H frame and D-H parameters of industrial robot. Finally, compared with other calibration methods, it can be seen that the calibration method based on Fixed Axis-Invariant proposed in this paper can obtain better results. It can improve the absolute positioning accuracy of industrial robots to less than 0.28 mm, which can solve the problems of cumbersome industrial robot modeling and poor calibration effects.

15 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZGZhenhao Guo
Zhenhao Guo
HJHehua Ju
Hehua Ju
CLChenxin Lu
Chenxin Lu
KWKaimeng Wang
Kaimeng Wang
With the increasing demand for space missions, space robots have become the focus of research and attention. As a typical representative, the free-floating dual-arm space robot has the characteristics of multiple degrees of freedom, a floating base, and dynamic coupling between the manipulator and the base, so its modeling and control are very challenging. To address these challenges, a novel dynamic modeling and control method is proposed for a free-floating dual-arm space robot. First, an explicit dynamic model of a free-floating dual-arm space robot is established based on the explicit canonical multi-rigid-body dynamic modeling theory and combined with the concept of a dynamic equivalent manipulator. The establishment process of this model is not only simple and canonical to avoid the definition and calculation of many intermediate variables, but the symbolic result expression of the model also has the characteristics of iteration, which is convenient for computer automatic modeling. Next, aiming at addressing the problem of trajectory tracking and the base attitude stability of a free-floating dual-arm space robot with parameter perturbation and external disturbance, an improved nonlinear model predictive control method introducing the idea of sliding mode variable structure is proposed. Theoretical analysis shows that the proposed controller has better robustness than the traditional nonlinear model predictive controller. Then, an in-orbit service task is designed to verify the effectiveness of the proposed dynamic modeling and control strategy of the free-floating dual-arm space robot. Finally, the dynamic modeling and control methods proposed are discussed and summarized. The proposed methods can not only realize the tracking of the desired trajectory of the arms of the free-floating space robot, but can also realize the stable control of the base of the free-floating space robot. This paper provides new insights into the difficult problems regarding the dynamics and control of free-floating dual-arm space robots.

21 June 2023 in Machines
Verified
Journal Article
Open access
PDF file
ABUBAKER AHMED ISMAILABUBAKER AHMED ISMAIL
ABUBAKER AHMED ISMAIL
HJHehua Ju
Hehua Ju
YYYang Yang
Yang Yang
HXHao Xu
Hao Xu
This paper introduces a new method for kinematic modeling of the robot arm by deriving a new elegant mathematical formula based on the axis vector with the tangent of the rotation angle. For this purpose, an innovative analytical quaternion is introduced through integration between Axis-Invariants and unit quaternion features named Ju-Gibbs quaternion, which expresses the body rotation with non-redundant parameters compared with the quaternions in literature. Two theorems based on the new form of the quaternion are developed and proved for the kinematic modeling of the robot arm. The first is attitude alignment, which is essential in multiaxial rotation systems. The second theorem for the wrist inverse kinematic (IK) solution is utilized to obtain the joint variables for the last joints of the end effector. In order to verify the effectiveness and accuracy of the proposed method, a numerical example and simulation of different structural configurations of robot and human arms are intensively studied. The novel quaternion provides a new tool for kinematic analysis and reduces the computational complexity of the kinematic solutions of the Robot-Arms wrist. Furthermore, the method laid a new foundation for the IKs of multi-axis systems based on Axis-Invariant and tangent quaternion.

20 January 2021 in IEEE Access
Verified
Journal Article
Open access
KWKaimeng Wang
Kaimeng Wang
HJHehua Ju
Hehua Ju
YYYang Yang
Yang Yang
ZGZhenhao Guo
Zhenhao Guo
This paper proposes a novel brake mechanism in robot joints, especially for space robot joints which require low power consumption and high reliability. The key point of the brake mechanism is that the torque spring is replaced with the Nd-Fe-B permanent magnet. Due to the position and force relationship between the permanent magnet and the electromagnet in the brake mechanism, the stroke of the brake armature can be extended so that the bolt type brake structure is adapted and the braking torque can be infinite theoretically. Meanwhile, the holding current in the electromagnet can be decreased to save energy and reduce heat generation. The magnetic circuit models of the electromagnet and permanent magnet in the brake mechanism are established and analyzed. In order to improve the response speed of the brake mechanism, a novel H-bridge brake power supply circuit is proposed. To verify the benefits of the design, a permanent magnet brake prototype with the H-bridge power supply circuit is set up. While the holding current is consistent with the peak current in the conventional torque spring motor brake, the proposed permanent magnet brake mechanism can decrease the holding current below 0.1 A.

3 March 2020 in IEEE Access
Verified
Journal Article
Open access
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
HXHao Xu
Hao Xu
CLChenxin Lu
Chenxin Lu
This paper investigates the on-orbit maintenance task planning of large-scale space solar power station. The research is of great significance for the normal operation of large-scale space equipment. Space robots are very maneuverable, which makes space maintenance possible. A new task planning algorithm is proposed for the on-orbit maintenance of space robots. Firstly, based on the discretization method, the modified clustering method is used to cluster the maintenance area of large-scale space solar power stations. Secondly, the hierarchical structure principle is used to assign tasks to the space robot, the inner layer plans the shortest path within the cluster set, and the outer layer plans the optimal path between the cluster sets. Finally, based on the optimal path of the outer layer of the maintenance task, a hybrid optimization algorithm based on tabu algorithm and modified ant colony algorithm is proposed. The algorithm can meet the space machine task allocation requirements and analyze the maintenance path under certain energy conditions. The simulation results show that the proposed algorithm can effectively solve the optimal problem of space robot mission planning under resource constraints.

21 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PXPengfei Xiao
Pengfei Xiao
HJHehua Ju
Hehua Ju
QLQidong Li
Qidong Li
FCFeifei Chen
Feifei Chen
This study studies the problem of on-orbit maintenance task planning for space-robot clusters. Aiming at the problem of low maintenance efficiency of space-robot cluster task-planning, this study proposes a cluster-task-planning method based on energy and path optimization. First, by introducing the penalty-function method, the task planning problem of the space-robot cluster under limited energy is analyzed, and the optimal-path model for task planning with comprehensive optimization of revenue and energy consumption are constructed; then, the maintenance task points are clustered to reduce the scale of the problem, thus reducing the difficulty of solving the problem; finally, a modified differential evolution algorithm is proposed to solve the problem of space-robot cluster task-planning, improve the performance of space-robot cluster task-assignment and path planning. Simulation results show that the proposed optimal-path model of space-robot cluster and the modified differential evolution algorithm can effectively solve the task-planning problem of spatial robot clusters.