Berkay Menç

Dr. Berkay Menç

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2024 in Materials Science and Technology
Verified
Journal Article
Closed access
BMBerkay Menç
Berkay Menç
YÖYusuf Özçatalbaş
Yusuf Özçatalbaş
Metallic foams are classified into two groups based on their pore structure: closed and open pores. The variability of cell structures directly depends on the production method and the variability of parameters. Open – cell metallic foams are used as heat exchangers due to their large surface area, in filters and separators due to their properties such as high liquid/gas permeability and corrosion resistance, and in water purifiers to reduce the concentration of unwanted ions dissolved in water because they can provide liquid flow, and in silencers due to their sound absorbing feature. Due to their thermal conductivity, they are generally used in functional applications such as catalyst supports and flame arresters. In this study, open cell aluminum foams with different pore sizes were produced using the powder metallurgy method and polyurethane foam (PUF) replica technique. After the PUF model material of the foams was removed at 500 °C for 6 h, they were sintered at different temperatures such as 850, 900 and 950 °C for 6 h. Density measurement, XRD analysis, microstructure examination and compression testing were applied to the sintered open-cell foams. The highest pore ratio and compressive strength were determined in foams with a 20 ppi (porosity per inch) pore ratio sintered at 950 °C.

16 April 2026 in Journal of Adhesion Science and Technology
Verified
Journal Article
Closed access
GCGizem Candaş
Gizem Candaş
BMBerkay Menç
Berkay Menç
YÖYusuf Özçatalbaş
Yusuf Özçatalbaş
1. The aerospace and automotive industries have increasingly adopted lightweight and high-strength materials (Al, Mg, Ti alloys, and polymer composites) instead of traditional heavy metals to impro...


17 March 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
GCGizem Candaş
Gizem Candaş
BMBerkay Menç
Berkay Menç
YÖYusuf Özçatalbaş
Yusuf Özçatalbaş
This study aims to investigate the bonding performance of CFRP + AA7075-T6 aluminum alloy hybrid structures, which are of critical importance in engineering applications in the aerospace and defense fields. The effects of various metal surface preparation treatments on adhesion performance were experimentally investigated using an epoxy-based adhesive film. Twill-weave CFRP laminates and AA7075-T6 aluminum alloy plates were bonded using Syensqo MTA 240/PK13-313g/m2 adhesive to fabricate single-lap shear test specimens. Five distinct surface configurations were applied to the AA7075-T6 plates. These treatments included HNO3 etching, NC machined cross-hatching, silica grit blasting, and clear anodizing subsequent to glass bead blasting. Following these treatments, surface roughness values ranging from Ra 0.23 to 4.10 µm (Rz 1.56 – 24.21 µm) were obtained for the Al alloy specimens. Failure mechanisms were characterized using optical microscopy and SEM-IXRF analyses. Following single-lap shear tests performed according to ASTM D1002, the highest average lap shear strengths were obtained for the anodized and silica sandblasted aluminum specimens, with values of 15.77 MPa and 14.50 MPa, respectively. The lowest strength was recorded for the cross-hatched specimens, with an average value of 7.30 MPa. Metallographic investigations and SEM-IXRF analyses demonstrated that both the cross-hatch patterns and the as-received surfaces had a detrimental effect on the bonding performance. In contrast, it was determined that sandblasting and anodizing treatments facilitated the joining of AA7075-T6 and CFRP plates, resulting in a stronger interfacial bond.