1. The aerospace and automotive industries have increasingly adopted lightweight and high-strength materials (Al, Mg, Ti alloys, and polymer composites) instead of traditional heavy metals to impro...
This study aims to investigate the bonding performance of CFRP + AA7075-T6 aluminum alloy hybrid structures, which are of critical importance in engineering applications in the aerospace and defense fields. The effects of various metal surface preparation treatments on adhesion performance were experimentally investigated using an epoxy-based adhesive film. Twill-weave CFRP laminates and AA7075-T6 aluminum alloy plates were bonded using Syensqo MTA 240/PK13-313g/m2 adhesive to fabricate single-lap shear test specimens. Five distinct surface configurations were applied to the AA7075-T6 plates. These treatments included HNO3 etching, NC machined cross-hatching, silica grit blasting, and clear anodizing subsequent to glass bead blasting. Following these treatments, surface roughness values ranging from Ra 0.23 to 4.10 µm (Rz 1.56 – 24.21 µm) were obtained for the Al alloy specimens. Failure mechanisms were characterized using optical microscopy and SEM-IXRF analyses. Following single-lap shear tests performed according to ASTM D1002, the highest average lap shear strengths were obtained for the anodized and silica sandblasted aluminum specimens, with values of 15.77 MPa and 14.50 MPa, respectively. The lowest strength was recorded for the cross-hatched specimens, with an average value of 7.30 MPa. Metallographic investigations and SEM-IXRF analyses demonstrated that both the cross-hatch patterns and the as-received surfaces had a detrimental effect on the bonding performance. In contrast, it was determined that sandblasting and anodizing treatments facilitated the joining of AA7075-T6 and CFRP plates, resulting in a stronger interfacial bond.