In this study, an efficient method to synthesize CuO-CuS core-shell nanowires by two-step annealing process was reported. CuO nanowires were prepared on copper foil via thermal oxidation in a three-zone horizontal tube furnace. To obtain larger surface area for photocatalytic applications, we varied four processing parameters, finding that growth at 550 °C for 3 h with 16 °C/min of the ramping rate under air condition led to CuO nanowires of appropriate aspect ratio and number density. The second step, sulfurization process, was conducted to synthesize CuO-CuS core-shell nanowires by annealing with sulfur powder at 250 °C for 30 min under lower pressure. High-resolution transmission electron microscopy studies show that a 10 nm thick CuS shell formed and the growth mechanism of the nanowire heterostructure has been proposed. With BET, the surface area was measured to be 135.24 m2·g−1. The photocatalytic properties were evaluated by the degradation of methylene blue (MB) under visible light irradiation. As we compared CuO-CuS core-shell nanowires with CuO nanowires, the 4-hour degradation rate was enhanced from 67% to 89%. This could be attributed to more effective separation of photoinduced electron and hole pairs in the CuO-CuS heterostructure. The results demonstrated CuO-CuS core-shell nanowires as a promising photocatalyst for dye degradation in polluted water.
In this work, cobalt silicide nanowires were synthesized by chemical vapor deposition processes on Si (100) substrates with anhydrous cobalt chloride (CoCl2) as precursors. Processing parameters, including the temperature of Si (100) substrates, the gas flow rate, and the pressure of reactions were varied and studied; additionally, the physical properties of the cobalt silicide nanowires were measured. It was found that single-crystal CoSi nanowires were grown at 850°C ~ 880°C and at a lower gas flow rate, while single-crystal Co2Si nanowires were grown at 880°C ~ 900°C. The crystal structure and growth direction were identified, and the growth mechanism was proposed as well. This study with field emission measurements demonstrates that CoSi nanowires are attractive choices for future applications in field emitters.
Single-crystalline NiSi 2 , Ni 2 Si and Ni 31 Si 12 nanowires with outstanding characteristics were synthesized through a nickel transport chemical vapor deposition method.
Unusually large and compressively strained Si in nanoheterostructures of Ni silicide/Si/Ni silicide, in which the strain of the Si region can be achieved up to 10%, has been produced with point contact reactions between Si and Ni nanowires in an ultrahigh vacuum transmission electron microscope. The growth rate and relationships between the strain and the spacing of the Si region have been measured. Based on the rate and relationships, we can control the Si dimension and, in turn, the strain of remaining Si can be tuned with appropriate spacing. Since one-dimensional nanoheterostructures may have potential applications in nanoelectronic devices, the existent strain will further affect carrier mobility and piezoresistance coefficients in the Si region. Electrical measurements on the nanodevices from such nanoheterostructures show that the current output closely correlates with the Si channel length and compressive strain.