Zhuangzhuang Li

Dr. Zhuangzhuang Li


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJinlie Li
Jinlie Li
TMTianyu Ma
Tianyu Ma
XYXianjin Yin
Xianjin Yin
Feng WangFeng Wang
Feng Wang
ZLZhuangzhuang Li
Zhuangzhuang Li
ZZZheng ZL
Zheng ZL
High-power-density insulated gate bipolar transistor (IGBT) modules in new energy vehicles require efficient heat dissipation and good temperature uniformity. This study proposes a tri-objective topology optimization method for a liquid-cooled heat sink using average temperature, temperature variance, and flow dissipation as the objective functions. A two-dimensional model was established in COMSOL to investigate the effects of the fluid volume fraction, inlet pressure, and optimization-weight distribution on the optimized topology and thermo-hydraulic performance. The results show that a fluid volume fraction of 0.4 and an inlet pressure of 15 Pa provide the best overall performance. Compared with the bi-objective design, introducing temperature variance as a third objective reduces temperature variance by 50.23%, with only a 1.08% increase in average temperature. Three-dimensional simulations further verify the optimized design. Compared with a conventional pin-fin heat sink, the topology-optimized structure reduces the average temperature by 10.43% and the temperature variance by 44.37%, while increasing the flow dissipation by 49.57%. These results show that tri-objective topology optimization is an effective method for improving the thermal management of high-power-density IGBT modules.

20 September 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZLZhuangzhuang Li
Zhuangzhuang Li
ZZZheng ZL
Zheng ZL
Insulated-gate bipolar transistor (IGBT) modules exhibit thermal behavior governed by interacting mechanisms spanning carrier transport, chip-scale diffusion, multilayer heat spreading, coolant convection, and thermomechanical response. This study presents an energy-consistent computational framework whose novelty lies not in the individual solvers, but in the explicit cross-scale energy interfaces, multirate synchronization, and observation operators that distinguish local-maximum, area-averaged, current-weighted, and sensor-related junction temperatures. Published first-principles and transport data for bulk silicon are used as reference-calibrated priors; the calculations implemented here comprise terminal-loss evaluation, prescribed energy-normalized spatial sources, analytical and two-dimensional diffusion reconstructions, three-dimensional finite-element thermal analysis, and a reduced-order Cauer network. For an 80 μm silicon chip at 400 K, the Fourier diffusion time is 0.12 ms, whereas the convention δT = 2√(αt) reaches the chip thickness at 0.030 ms; these values represent different diffusion criteria. In an illustrative boundary-sensitivity case, increasing h from 650 to 2000 W m−2 K−1 lowers the modeled maximum temperature from 132.1 to 99.6 °C without eliminating the central hotspot. The chip-side and cold-side cross-model differences are 1.28–2.98% and 9.54–12.56%, respectively, when terminal boundaries differ, while temperature-dependent loss raises the lumped Cauer peak by approximately 11 K. Mesh, time-step, and energy checks verify the numerical implementation, and cross-model comparisons assess consistency.