A.B. Kydrashov

Dr. A.B. Kydrashov

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2021 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
AMAzamat Matayev
Azamat Matayev
АААрстанбек Абдиев
Арстанбек Абдиев
AKA.B. Kydrashov
A.B. Kydrashov
MAMussin Aibek
Mussin Aibek
NKNatalia Khvatina
Natalia Khvatina
Dinara KaumetovaDinara Kaumetova
Dinara Kaumetova
Purpose.Determination of the rock stability along the strike of the mass, where the drift mining of the horizon -480 m is conducted, considering the possibility of using the improved types of supports in the conditions of the 10th Anniversary of Kazakhstan’s Independence mine at the Khromtau field with the substantiation of using the effective type of fastening that increases technical and technological, operational and economic indicators of the mine. Methods. Numerical modelling of the stress-strain state of the rock mass applied at the mine have been performed using the RS2 software in a two-dimensional formulation. The rock mass state, as well as the physical-mechanical properties of mine rocks are determined according to building codes and regulations (SNiP II-94-80), depending on the category of the rock stability. Findings. It has been revealed that the combined supports from rock bolts and shotcrete are the most rational type of fastening in the studied mine. The efficiency and prospects of using the combined supports have been determined, which ensure a decrease in their material consumption and cost while increasing the reliability of mine workings and the labor productivity of miners. The use of combined support allows to increase the economy of materials for support by 1.7 times, as well as to increase the drifting rate by 1.6 times in comparison with the metal support. Originality.The paper proposes a new approach to substantiation of an effective fastening method by comparing the costs when driving horizontal underground mine workings in the mining-and-geological conditions of the 10th Anniversary of Kazakhstan’s Independence mine. Practical implications.The research results can be used when planning mining operations, in particular, stable fastening methods at the 10th Anniversary of Kazakhstan’s Independence mine of the Khromtay deposit, as well as other mining enterprises with similar mining-and-geological conditions.

1 January 2021 in Mining of Mineral Deposits
Verified
Journal Article
Open access
Daulet TakhanovDaulet Takhanov
Daulet Takhanov
BMBerikbol Muratuly
Berikbol Muratuly
ZRZhuldyz Rashid
Zhuldyz Rashid
AKA.B. Kydrashov
A.B. Kydrashov
Purpose. Determining the actual dimensions of the protecting and crown pillars of ore bodies by seismic survey and assessing the possibility of rock mass collapse and fracturing at the lower levels of the Zhairemskoye field. Methods. An integrated approach is used, which involves the analysis of complete ore bodies development during the combined mining. To determine the geological strength index (GSI) and rock mass rating (RMR), the mass structure is studied, as well as the survey is executed of rock fracturing on the contours of mine workings at levels of +288, +240, +192, +144 m. In addition, the physical and mechanical properties of rocks are refined using the RocLab software. Using the numerical modelling of the self-caving process, when mining the protecting and crown pillars, the processed results of numerical modelling are analysed and the possible zones of the mass deformation are assessed based on the Phase2 software. Findings. It has been determined that during the mining of ore bodies 4 and 6, protecting pillars between the quarry and the underground mine, crown pillars between the levels up to the level of +144 m, the rock displacements are possible along glide surfaces. It has been revealed that the haulage workings of levels +240 and +192 m fall into the zone of possible displacements influence, and the rock pillar between ore bodies 4 and 6 will be exposed to inelastic deformations during the mining of crown pillars to the level of +144 m. It has been found that after the crown pillar development between the levels of +240 and +192 m for ore body 6, the rock pillar destructions are possible between ore bodies 4 and 6, since during the modelling, displacements of more than 2 mm are observed. In this case, the destruction processes are possible in the rock pillar upper part. Originality.A geomechanical assessment of the rocks tendency to caving is given and problem areas of stability during the mining of ore bodies 4 and 6 in the Zhairemskoye field are identified. Practical implications. The stable parameters of protecting and crown pillars have been substantiated, which is an important aspect in the design/efficient technology of mining the contiguous ore bodies. Keywords: engineering seismic, ore body, pillar, level, iron, manganese

30 June 2024 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
MAMussin Aibek
Mussin Aibek
AKA.B. Kydrashov
A.B. Kydrashov
ZAZhanar Asanova
Zhanar Asanova
YAYerbolsyn Abdrakhman
Yerbolsyn Abdrakhman
DIDina Ivadilinova
Dina Ivadilinova
Purpose. The research is aimed at substantiating the optimal parameters of blast-hole ore breaking to reduce the rock mass destruction when mining low-thickness vein deposits using the mining system of sublevel drifts (SD). The focus is on analyzing the impact of blasting on the out-contour rock mass during the blast-hole breaking process. Methods. The three-dimensional block model is constructed using rating classifications of rocks based on studying their strength properties and structural peculiarities. The inelastic deformation zones around the stoping extraction are determined by numerical analysis using the finite element method in 2D formulation. Experimental blasts are assessed by varying the blast-hole drilling scheme depending on the stability rating. Findings. During the experimental-industrial tests, rational blast-hole drilling schemes have been substantiated, contributing to maintaining the stability of the host rocks when mining low-thickness veins. Originality. Effective methods for reducing the ore dilution have been substantiated, which take into account not only the strength properties and structural peculiarities of rocks, but also their seismic impact from blasting on the out-contour rock mass stability when mining low-thickness deposits using a system of sublevel drifts. Practical implications. Practical significance is in the possibility of minimizing the percentage of mineral dilution when mining low-thickness ore bodies using a system of sublevel drifts, which can significantly reduce the cost of mined minerals by reducing ore losses caused by the rock mass destruction during mining operations.

30 August 2026 in Neft i Gaz
Verified
Journal Article
Closed access
BBB.ZH. Burkhanov
B.ZH. Burkhanov
AKA.B. Kydrashov
A.B. Kydrashov
BKBayan Khamzina
Bayan Khamzina
SESh. Ergalieva
Sh. Ergalieva
GZG.B. Zhambyl
G.B. Zhambyl
This article presents a numerical assessment of chemical flooding strategies for enhanced oil recovery (EOR) in a pore-fractured carbonate reservoir using the CMG STARS reservoir simulator. Carbonate reservoirs are characterized by complex pore-fracture systems and high heterogeneity, which often result in poor sweep efficiency and significant residual oil saturation after conventional water flooding. To improve recovery performance, several conformance control methods, including polymer flooding, surfactant flooding, pre-gel treatment, and combined surfactant-polymer injection, were evaluated under different injection scenarios. Reservoir performance was assessed using key indicators such as cumulative oil production, incremental oil recovery, water cut, sweep efficiency, and production sustainability. The simulation results demonstrated that all chemical flooding methods outperformed conventional water injection, although their effectiveness varied depending on chemical concentration, injection volume, and operational conditions. Polymer flooding improved sweep efficiency by increasing the viscosity of the injected fluid, while surfactant flooding reduced interfacial tension and enhanced oil mobilization. Pregel treatment exhibited the highest improvement in several production scenarios by effectively controlling fluid movement and reducing excessive water production. The combined surfactant-polymer strategy also showed strong synergistic effects, providing stable production and significant incremental oil recovery. Sensitivity analyses identified optimal chemical concentrations that balanced recovery performance with operational feasibility. Application of the optimized strategies to the Zhanazhol oilfield model confirmed their technical effectiveness and long-term benefits. The findings demonstrate that carefully designed chemical flooding programs can substantially increase oil recovery, improve conformance control, and reduce water cut in complex carbonate reservoirs. The results provide practical guidance for selecting and optimizing chemical EOR techniques and support future field implementation in heterogeneous pore-fractured carbonate formations.

6 November 2023 in Горный журнал Казахстана
Verified
Journal Article
Closed access
VDVladimir Demin
Vladimir Demin
AKA.B. Kydrashov
A.B. Kydrashov
ЕАЕ.а. Абеуов
Е.а. Абеуов
ГТГ.д. Танекеева
Г.д. Танекеева
Зерттеудің мақсаты іргелес жатқан тау сілемінің сипаты анықталған заңдылықтары негізінде қазба жұмыстарын қарқынды және қауіпсіз қазу технологиясын жасау үшін қарнақтармен бекітілген шахталық қазбалардың контурларының тұрақтылығын бақылау параметрлерін бағалау болды. Кен қазбаларының айналасындағы тау массивінің күйін бағалау үшін құрылымдық бұзылған гетерогенді тау массивіндегі тау жыныстарының деформациясы, ығысуы және құлау механизмі зерттелді. Тау-кен жұмыстарының қауіпсіздігін қамтамасыз ету мақсатында кеніштердегі штангаларды бекітуге арналған шахталардағы тау жыныстары массивінің күйін және кеніштердегі қарнақтық бекітпелер жұмысының параметрлерін ескере отырып, контурға жақын табан жыныстарын бекіту технологиясы әзірленді. Қарағанды көмір бассейнінің шахталарындағы операциялар анықталды The purpose of the research was to evaluate the stability control parameters of the contours of mine workings, fixed with anchor bolting, in order to create a technology for intensive and safe excavation of excavation workings based on the identified patterns of behavior of adjacent rock masses. The mechanism of deformation, displacement and collapse of rocks in a structurally disturbed heterogeneous rock mass was studied to assess the state of the rock mass around mine workings. A technology for fixing near-contour soil rocks has been developed, taking into account the state of the rock mass around the working, and the parameters for the operation of rock bolts in mines for fixing rods in workings in order to ensure the safety of mining operations in the mines of the Karaganda coal basin have been determined Целью исследований явилась оценка параметров управления устойчивостью контуров горных выработок, закрепленных анкерной крепью, для создания технологии интенсивного и безопасного проведения выемочных горных выработок на основе выявленных закономерностей поведения примыкающих к ним массивов горных пород. Исследован механизм деформирования, сдвижения и обрушения пород в структурно нарушенном неоднородном горном массиве для оценки состояния породного массива вокруг горных выработок. Разработана технология крепления приконтурных пород почвы с учетом состояния горного массива вокруг выработки и определены параметры эксплуатации анкерной крепи на шахтах для закрепления штанг в выработках в целях обеспечения безопасности ведения горных работ на шахтах Карагандинского угольного бассейна

12 July 2022 in Горный журнал Казахстана
Verified
Journal Article
Closed access
ДТД.к. Тажибаев
Д.к. Тажибаев
AKA.B. Kydrashov
A.B. Kydrashov
АМА.а. Мурзагалиева
А.а. Мурзагалиева
ААА.к. Абдыгалиева
А.к. Абдыгалиева
Әртүрлі бекітпелердің функциональдық мүмкіншіліктерін анықтау үшін салыстырмалы аналитикалық зерттеулер жүргізілді. Тау-кен қазбаларды қарнақтармен, құрама тіреумен, рамалық тіреумен бекіткенде тау қысымы анықталып, олардың жұмыс жасау деңгейі пысықталды. Шақтыдағы бақылаудан алынған мәліметтер мен барлау ұңғымасының геологиялық құрылымын модельге енгізіп көп сатылы модельдедік. Сатылап модельдеудің нәтижесі көрсеткеніндей қазбалар арасындағы түйіспеге дейінгі қашықтықтың кернеудің мәніне әсер ететін негізгі фактор екенін көрсетті. Қазбаға дейінгі қашықтыққа кернеудің тәуелділігін көреміз. Ұсынылған мақалада «Phase 2» бағдарламасын қолдану арқылы тау сілемінің кернеулі-деформациялы күйін есептеу нәтижелерімен игерудің тау-кен-технологиялық параметрлеріне тәуелді қазбаның орнықтылығына әсер ететін кернеудің параметрлері анықталды. Проведены сравнительные аналитические исследования для определения функциональности различных видов крепи. Установлено проявление горного давления при креплении выработки анкерами, комбинированной или рамной крепью, определен уровень их эксплуатации. Таким образом, выполнено многоступенчатое моделирование на основе данных, полученных в результате наблюдений и из геологических разведочных скважин. Результаты пошагового моделирования показали, что расстояние до стыка между выработками является основным фактором, влияющим на величину напряжений. Показана зависимость напряжений от расстояния до сопряжения. По результатам расчета напряженно-деформированного состояния горного массива с помощью программы «Phase 2» определены параметры напряжений, влияющих на устойчивость выработки в зависимости от горно-технологических параметров разработки. Comparative analytical studies were carried out to determine the functionality of various types of support. When securing the working with anchors, combined or frame support, the occurrence of rock pressure was established and the level of their operation was revealed. A multistage modeling of the geological structure of the exploration well and the data obtained as a result of observations was carried out. The results of step-by-step modeling showed that the distance to the joint between workings is the main factor affecting the magnitude of stresses. We see the dependence of the stress on the distance to working. Based on the results of calculating the stress-strain state of a rock mass using the «Phase 2» program, the parameters of stresses affecting the stability of a mine are determined, depending on the mining and technological parameters of development.