Monitoring the formation of dendrites or filaments of lithium is of paramount importance for Li-based battery technologies, hence the intense activities in designing in situ techniques to visualize their growth. Herein we report the benefit of correlating in situ electron paramagnetic resonance (EPR) spectroscopy and EPR imaging to analyze the morphology and location of metallic lithium in a symmetric Li/LiPF6/Li electrochemical cell during polarization. We exploit the variations in shape, resonance field and amplitude of the EPR spectra to follow, operando, the nucleation of sub-micrometric Li particles (narrow and symmetrical signal) that conjointly occurs with the fragmentation of bulk Li on the opposite electrode (asymmetrical signal). Moreover, in situ EPR correlated spectroscopy and imaging (spectral-spatial EPR imaging) allows the identification (spectral) and localization (spatial) of the sub-micrometric Li particles created by plating (deposition) or stripping (altered bulk Li surface). We finally demonstrate the possibility to visualize, via in situ EPR imaging, dendrites formed through the separator in the whole cell. Such a technique could be of great help in mastering the Li-electrolyte interface issues that plague the development of solid-state batteries.
We have investigated metallic lithium particle nucleation following lithiation and delithiation steps of the graphite electrode using X-band electron paramagnetic resonance (EPR). Metallic lithium aggregates like dendrites and/or filaments which are formed during electrochemical cycling on the graphite anode are complex structures which may lead to internal short-circuit and safety issues. Understanding and following, in real conditions, this nucleation process is necessary to improve the development of Li-ion batteries. The complexity to detect metallic lithium structures inside Li-ion batteries depends on the number of EPR lines and their linewidth. The presence of lithiated graphite phases affects the detection of micrometric Li-metal elements. Herein, we report a new approach using cw-EPR (continuous-wave EPR) spectroscopy and imaging, combining the first- and second-harmonic detection schemes to provide evidence for the metallic lithium aggregate nucleation in these negative electrodes. Although the first harmonic gives all the EPR signals present in the sample, it is found that the second-harmonic EPR signal is mainly sensitive to metallic lithium depositions.
The degradation behaviors of the encapsulant and the imbedded additives significantly determine the reliability of solar modules. Nevertheless, a link between the degradation of the encapsulant, including the additive interactions, and the longevity of the overall module is rarely established until now. Herein, mini‐modules containing ethylene‐vinyl acetate copolymer (EVA) as encapsulant are subject to damp heat (DH) or ultraviolet (UV) weathering based on IEC 61215. Macroscopically, the degradation under both weathering types characterized by I – V measurements and electroluminescence (EL) measurements is diverging in dependence on the used stressor. Using electron paramagnetic resonance and orbitrap mass spectrometry, it is shown that deacetylation of the EVA occurs significantly for both types of weathering. In the case of DH, however, the mechanism of action of the UV stabilizer is hindered, so that strong encapsulant degradation is observed despite a lower energy input in comparison with UV. Furthermore, the produced acetic acid under DH weathering leads to the observed reduction in EL, an increase in series resistance, and, a reduction of the performance of the modules. The work carried out shows that the degradation of the solar modules is strongly dependent on the behavior of the UV stabilizer.
Usually, conventional electron paramagnetic resonance (EPR) spectroscopy and imaging employ a microwave cavity operating at X-band, i.e., with an excitation frequency of around 9.6 GHz, and this remains the most popular mode for the magnetic characterization of lithium batteries to date. Here, we provide the first low-frequency EPR investigations with respect to monitoring the metallic lithium structures in solid-state pouch cell batteries. We show that L-band, i.e., a microwave frequency of around 1.01 GHz, is an invaluable method to probe the electrode components directly through a standard pouch cell using aluminum-laminated film for packaging without opening the battery. These results offer a new approach for monitoring the nucleation of micrometric and submicrometric lithium particles, such as dendritic lithium structures, and is an important step in the development of reliable solid-state batteries.
We have investigated the metallic lithium particles nucleation during lithiation and delithiation of the graphite electrode using X-band electron paramagnetic resonance (EPR). Metallic lithium aggregates like dendrites and/or filaments which are formed during electrochemical cycling on the graphite anode are complex structures which may lead to internal short-circuit and safety issues. Understanding and following, in real time and real conditions, this nucleation process is necessary to improve the development of Li-ion batteries. The complexity to detect metallic lithium structures inside Li-ion batteries depends on the number of EPR lines and their linewidth. The presence of lithiated graphite phases affects the detection of micrometric Li-metal elements. Here, we report a new approach using cw-EPR spectroscopy and imaging combining the first and the second harmonic detection schemes to provide evidence of the metallic lithium aggregates nucleation in these negative electrodes. Although the first harmonic gives all of EPR signals present in the sample, it is found that the second harmonic EPR signal is mainly sensitive to metallic lithium depositions.
Usually, the conventional electron paramagnetic resonance (EPR) spectroscopy and imaging use a microwave cavity operating at X-band, i.e. with an excitation frequency of around 9.6GHz, and remains the most popular mode in the magnetic characterization of lithium batteries to date. We provide here the first low-frequency EPR investigations for monitoring the metallic lithium structures in the solid-state pouch cell batteries. We show that L-band, i.e. a microwave frequency of around 1GHz, is an invaluable method to probe in depth the electrode components through a standard pouch cell using aluminum laminated film for packaging without opening the battery. These results offer a new approach for monitoring the nucleation of micrometric and sub-micrometric lithium particles such as dendritic lithium structures which is an important step in the development of reliable solid-state batteries.